R3721-F3210-F3171-HP High-End Firewalls VPN Configuration Guide-6PW101

34
Figure 32 Adding a P2MP GRE tunnel interface (Tunnel0)
4. Configure a static route from Firewall A through interface Tunnel0 to the branch network:
a. Select Network > Routing Management > Static Routing from the navigation tree.
b. Click Add to perform the configurations shown in Figure 33.
c. Enter 192.168.12.0 as the destination IP address.
d. Select mask 255.255.255.0.
e. Select Tunnel0 as the outbound interface.
f. Click Apply.
Figure 33 Adding a static route from Firewall A through interface Tunnel0 to the branch network
Configuring Firewall B
1. Configure an IPv4 address for each interface and assign the interfaces to security zones. (Details
not shown.)
2. Create a P2MP GRE tunnel interface, with the tunnel interface number being 0:
a. Select VPN > GRE > P2MP from the navigation tree.
b. Click Add to perform the configurations shown in Figure 34.