R3721-F3210-F3171-HP High-End Firewalls VPN Configuration Guide-6PW101

431
d. Enter area ID 0, select Normal as the area type, enter network address 10.0.3.0, select
network mask 0.0.0.255, and then click Add Network. Enter network address 10.0.1.0, select
network mask 0.0.0.255, and then click Add Network. Click Apply.
e. Click More>> to perform OSPF interface configuration.
f. Click the icon of interface Tunnel1.
g. Enter 10 as the Hello interval, enter 40 as the Dead interval, select P2MP as the network type,
select 0 as the DR priority, and click Apply.
Verifying the configuration
1. From the navigation tree of the main VAM server, select VPN > DVPN > Server. Click the VAM
Client Info tab to view the address mapping information of all VAM clients that have registered
with the main VAM server.
Figure 323 Viewing WAM client information on the main VAM server
The previous figure shows that Hub 1, Hub 2, Spoke 1, and Spoke 2 all have registered their address
mapping information with the main VAM server.
2. From the navigation tree of the backup VAM server, select VPN > DVPN > Server. Click the VAM
Client Info tab to view the address mapping information of all VAM clients that have registered
with the backup VAM server.
Figure 324 Viewing WAM client information on the backup VAM server