R3721-F3210-F3171-HP High-End Firewalls VPN Configuration Guide-6PW101

437
Configuring a VAM client
Complete the following tasks to configure a VAM client:
Task Remarks
Creating a VAM client Required.
Setting the VAM protocol packet retransmission interval Optional.
Specifying the primary VAM server Required.
Specify a primary VAM server, a
secondary VAM server, or both.
Specifying the secondary VAM server
Configuring the username and password Optional.
Specifying the VPN domain of the VAM client Required.
Specifying the pre-shared key of the VAM client Required.
Enabling VAM client Required.
Creating a VAM client
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Create a VAM client and enter
its view.
vam client name client-name No client is created by default.
Setting the VAM protocol packet retransmission interval
If a client sends a VAM protocol packet to the server but receives no response in a specified period of
time, it retransmits the packet. A VAM protocol packet can be a connection request, negotiation
acknowledgement, registration request, or authentication request.
To set the interval for retransmitting a VAM protocol packet:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VAM client view. vam client name client-name N/A
3. Set the VAM protocol packet
retransmission interval.
resend interval time-interval
Optional.
5 seconds by default.
NOTE:
The maximum number of attempts to retransmit a VAM protocol packet is always 3; it is unmodifiable.
Specifying the primary VAM server
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VAM client view. vam client name client-name N/A