R3721-F3210-F3171-HP High-End Firewalls VPN Configuration Guide-6PW101

45
Figure 48 Adding a GRE over IPv4 tunnel interface
3. Configure a static route from Firewall C through interface Tunnel0 to the headquarters node:
a. Select Network > Routing Management > Static Routing from the navigation tree.
b. Click Add to perform the configurations shown in Figure 49.
c. Enter 172.17.17.0 as the destination IP address.
d. Select mask 255.255.255.0.
e. Select Tunnel0 as the outbound interface.
f. Click Apply.
Figure 49 Adding a static route from Firewall C through interface Tunnel0 to the headquarters node
Verifying the configuration
1. On Host B, specify Firewall C as the default gateway. Ping Host A from Host B. The ping operation
succeeds.