Brocade Fabric OS Documentation Updates - Supporting Fabric OS v6.4.x (53-1002063-09, August 2012)

Fabric OS Documentation Updates 3
53-1002063-09
Chapter
2
CEE Administrator’s Guide
In this chapter
The updates in this chapter are for the CEE Administrator’s Guide, published March 2010 and
October 2010.
•Documentation updates for Fabric OS v6.4.0 . . . . . . . . . . . . . . . . . . . . . . . . . 3
•Documentation updates for Fabric OS v6.4.1 . . . . . . . . . . . . . . . . . . . . . . . . . 4
Documentation updates for Fabric OS v6.4.0
Chapter 3, Standard CEE Integrations and Configurations
Under the heading of "Creating the CEE map" on page 25, before the beginning of the procedure,
add the following note:
NOTE
The name used in the cee-map command must begin with a letter, and can consist of letters,
digits, hyphens, and underscore characters. Spaces are prohibited. Special characters are not
supported, and cause the name to truncate.
Under the heading of "Minimum CEE configuration to allow FCoE traffic flow" on page 29, add the
following note:
NOTE
The name used in the cee-map command must begin with a letter, and can consist of letters,
digits, hyphens, and underscore characters. Spaces are prohibited. Special characters are not
supported, and cause the name to truncate.
Chapter 9, Configuring QoS using the CEE CLI
Under the heading of "Creating a CEE map" on page 107, add the following note:
NOTE
The name used in the cee-map command must begin with a letter, and can consist of letters,
digits, hyphens, and underscore characters. Spaces are prohibited. Special characters are not
supported, and cause the name to truncate.
Under the heading of "Creating a CEE map" on page 107, delete the example under step 2.
Under the heading of "Defining a priority group table" on page 107, add the following note: