Brocade Web Tools Administrator's Guide v6.1.0 (53-1000606-02, June 2008)

94 Web Tools Administrator’s Guide
53-1000606-02
F_port trunk groups
7
Creating and maintaining F_port trunk groups
User this procedure to create an F_Port trunk group, and to add or remove member ports.
1. Select the Port Administration view.
2. Select the Advanced Mode view.
3. Select any port in the octet group in which you want to create the trunk group.
4. Select F_Port Trunking.
The F_Port Trunking dialog box displays (see Figure 44)
FIGURE 44 F_port trunking dialog box
5. Select one or more ports in the Ports for trunking pane.
A dialog box displays, asking you to select a trunk index.
6. Select the trunk index from the drop down box populated with the index for all the ports.
A trunk group is created, identified by the trunk index, and containing the port you selected.
7. Select the trunk group you just created.
Add Members becomes active.
8. Additional ports can be added by selecting a port, then selecting Add Members.
To remove a port from the trunk group, select the port and then select Remove Members.
9. Click OK when you are finished.