Brocade Web Tools Administrator's Guide v6.1.0 (53-1000606-02, June 2008)

106 Web Tools Administrator’s Guide
53-1000606-02
Creating advanced performance monitoring graphs
8
1. Open the Performance Monitoring window.
2. Click Performance Graphs> Advanced Monitoring> SCSI vs. IP Traffic.
The SCSI vs. IP Traffic Setup dialog box opens. This dialog box is similar to that shown in Figure
49 on page 103.
3. Double-click the domain to expand the slot/port list.
For Brocade 48000 directors and Brocade DCX, click the + signs to expand the ports under
each slot, as shown in Figure 49.
4. Click the port you want to monitor in the graph in the Port Selection List. Use Shift-click and
Ctrl-click to select multiple ports.
5. Click Add to move the selected ports to the Selected Ports list.
6. Optional: Click ADD ALL Ports to add all of the ports in the Port Selection List to the Selected
Ports list.
7. Optional: Click Search to open the Search Port Selection List dialog box, from which you can
search for all E_Ports, all F_Ports, or all port names with a defined string. Select the ports you
want to add and click Search in the Search Port Selection List dialog box.
8. Click Apply in the SCSI vs. IP Traffic Setup dialog box.
Only the selected ports are displayed in the SCSI vs. IP traffic graph.
Creating SCSI Command Graphs
This graph displays the total number of read or write (or both) commands on a given port or to a
specific LUN on a given port.
1. Open the Performance Monitoring window.
2. Click Performance Graphs> Advanced Monitoring> SCSI Commands> Graph Type.
The applicable setup dialog box opens. Figure 51 on page 106 shows the “SCSI Read/Write on
a LUN per port Setup” dialog box.
FIGURE 51 Creating a SCSI command graph
3. Navigate to a switch> slot> port in the Slot/Port Selection List.
4. Click the port from the Slot/Port Selection List and drag it into the Enter/drag slot,port field.
5. Optional: For the LUN per port graphs, type a LUN number, in hexadecimal notation.