Brocade Web Tools Administrator's Guide v6.1.0 (53-1000606-02, June 2008)

118 Web Tools Administrator’s Guide
53-1000606-02
Managing zoning with Web Tools
9
6. Click Zoning Actions> Save Config to save the configuration changes.
To enable the configuration, see “Enabling zone configurations” on page 124.
Renaming zone aliases
The new alias name cannot exceed 64 characters and can contain alphabetic, numeric, and
underscore characters. Use the following procedure to change the name of a zone alias.
1. Open the Zone Administration window as described on page 112.
2. Click the Alias tab and select the alias you want to rename from the Name drop-down list.
3. Click Rename.
The Rename an Alias dialog box appears.
4. Type a new alias name and click OK.
The alias is renamed in the Zone Admin buffer. At this point you can either save your changes
or save and enable your changes.
5. Click Zoning Actions> Save Config to save the configuration changes.
To enable the configuration, see “Enabling zone configurations” on page 124.
Deleting zone aliases
You can remove a zone alias from the Zone Admin buffer. When a zone alias is deleted, it is no
longer a member of the zones of which it was once a member.
NOTE
If you delete the only member zone alias, an error message is issued when you attempt to save the
configuration.
1. Open the Zone Administration window as described on page 112.
2. Click the Alias tab.
3. Select the alias you want to delete from the Name drop-down list.
4. Click Delete.
The Confirm Deleting Alias dialog box opens.
5. Click Yes.
The selected alias is deleted from the Zone Admin buffer. At this point you can either save your
changes or save and enable your changes.
6. Click Zoning Actions> Save Config to save the configuration changes.
To enable the configuration, see “Enabling zone configurations” on page 124.