Brocade Web Tools Administrator's Guide v6.1.0 (53-1000606-02, June 2008)

120 Web Tools Administrator’s Guide
53-1000606-02
Managing zoning with Web Tools
9
The zone is modified in the Zone Admin buffer. At this point you can either save your changes
or save and enable your changes.
6. Click Zoning Actions> Save Config to save the configuration changes.
To enable the configuration, see “Enabling zone configurations” on page 124.
Renaming zones
Use the following procedure to change the name of a zone.
1. Open the Zone Administration window as described on page 112.
2. Click the Zone tab.
3. Select the zone you want to rename from the Name drop-down list.
4. Click Rename.
5. On Rename a Zone, type a new zone name and click OK.
The zone is renamed in the Zone Admin buffer. At this point you can either save your changes
or save and enable your changes.
6. Click Zoning Actions> Save Config to save the configuration changes.
To enable the configuration, see “Enabling zone configurations” on page 124.
Cloning zones
Use the following procedure to clone a zone configuration.
1. Open the Zone Administration window as described on page 112.
2. Click the Zone tab.
3. Select the zone you want to clone from the Name drop-down list.
4. Click Copy.
5. On Copy an Existing Zone, enter a name for the copied zone.
6. Click OK.
The selected zone is copied from the Zone Admin buffer.
7. Cli ck Zoning Actions> Save Config to save the configuration changes.
Since no changes were made to the effective configuration, you do not need to enable the
configuration.
Deleting zones
Use the following procedure to delete a zone.
1. Open the Zone Administration window as described on page 112.
2. Click the Zone tab.
3. Select the zone you want to delete from the Name drop-down menu and click Delete.
4. On the confirmation dialog box, click Yes.