Brocade Web Tools Administrator's Guide v6.1.0 (53-1000606-02, June 2008)

Web Tools Administrator’s Guide 129
53-1000606-02
Managing the zoning database
9
Managing the zoning database
This section contains the following procedures for managing the zoning database:
• “Adding a WWN to multiple aliases and zones,” next
• “Removing a WWN from multiple aliases and zones” on page 129
• “Replacing a WWN in Multiple Aliases and Zones” on page 130
• “Searching for zone members” on page 130
• “Clearing the Zoning Database” on page 130
• “Adding Unzoned Online Devices to a Zone or Alias” on page 131
• “Removing offline or inaccessible devices from the zoning database” on page 132
• “Replacing offline devices” on page 132
• “Defining device aliases” on page 133
Adding a WWN to multiple aliases and zones
This procedure enables you to configure a WWN as a member in a zone configuration prior to
adding that device to the fabric. Specifically, it is useful if you want to add a WWN to all or most
zoning entities. The added WWN does not need to currently exist in the fabric.
1. Open the Zone Administration window as described on page 112.
2. Click Edit> Add WWN.
The Add WWN dialog box opens.
3. Type a WWN value in the WWN field and click OK.
The Add WWN dialog box displays all the zoning elements that will include the new WWNs. All
of the elements are selected by default.
4. Click items in the list to select or unselect, and click Add to add the new WWN to all the
selected zoning elements.
The WWN is added to the Zone Admin buffer and can be used as a member.
Removing a WWN from multiple aliases and zones
Use this procedure if you want to remove a WWN from all or most zoning entities.
1. Open the Zone Administration window as described on page 112.
2. Click Edit> Delete WWN.
The Delete WWN dialog box opens.
3. Type a WWN value in the WWN field and click OK.
The Delete WWN dialog box displays all the zoning elements that include the WWN.
4. Click items in the list to select or unselect, and click Delete to delete the WWN from all the
selected zoning elements.
The WWN is deleted from the selected items in the Zone Admin buffer.