Brocade Web Tools Administrator's Guide v6.1.0 (53-1000606-02, June 2008)

Web Tools Administrator’s Guide 153
53-1000606-02
Configuring the backbone fabric ID
11
Make sure that all switches in the backbone fabric have the same fabric ID.
1. Open the Switch View window.
2. Click FCR in the Manage section of the Tasks menu.
3. Click the EX-Ports tab.
4. Disable all of the EX_Ports by selecting all of the ports in the table and then clicking Disable.
5. Click the General tab.
6. Click Set Fabric ID in the task bar.
The Configure Backbone Fabric ID window appears.
7. Select a fabric ID from the drop-down menu.
The fabric ID is a number from 1 through 128. Web Tools warns you if you select a fabric ID that
is already in use.
8. Click OK.
9. Reenable all of the EX_Ports after Web Tools automatically reenables the FC-FC Routing
Service.