Brocade Web Tools Administrator's Guide v6.1.0 (53-1000606-02, June 2008)

Web Tools Administrator’s Guide 225
53-1000606-02
Configuring SNMP
18
FIGURE 104 SNMP tab
3. Select a trap level for a recipient from the corresponding Trap Level drop-down menu in the
SNMPv1 and SNMPv3 sections.
The level you select identifies the minimum event level that will prompt a trap.
4. Click Apply.
Changing the systemGroup configuration parameters
1. Open the Switch Administration window as described on page 31.
2. Click the SNMP tab (see Figure 104).
3. Type a contact name, description, and location in the SNMP Information section.
4. Optional: Select the Enable Authentication Trap check box to allow authentication traps to be
sent to the reception IP address.
5. Click Apply.