Brocade Web Tools Administrator's Guide v6.1.0 (53-1000606-02, June 2008)

Web Tools Administrator’s Guide 27

53-1000606-02

Opening a Telnet or SSH client window

When you open a Telnet or SSH client window, the connection is to the IP interface of the switch.

You cannot connect to a CP blade on a director switch through a Telnet or SSH client window

opened from Web Tools, even when the blade has an IP address and supports telnet sessions. See

the Fabric OS Command Reference for information about the telnet commands.

NOTE

Internet Explorer 7.0 default settings disable telnet functionality. If you are using Internet Explorer

7.0, you must make the appropriate changes in the registry to open the telnet window.

1. Select a switch in Fabric Tree.

You are prompted to log in if the OS is version 5.3.0 or greater. Otherwise, the selected switch

appears in the Switch View.

2. Select Telnet/SSH Client in the Other section of the Tasks panel.

The Preferences dialog box displays.

3. Select the client by clicking Telnet or SSH.

4. Enter the Telnet or SSH path, as defined for your implementation. To avoid the need to

remember and key in the path, you can store the path on your PC and browse to the location.

Clicking the button to the right of the field initiates the browse capability.

5. Click OK.

The Telnet or SSH window displays.

6. Enter your user credentials at the login prompt.

7. To close the session, type exit at the prompt.