Brocade Web Tools Administrator's Guide v6.1.0 (53-1000606-02, June 2008)

Web Tools Administrator’s Guide 33
53-1000606-02
Removing a syslog IP address
3
3. In the New IP field, enter an IP address in either IPv4 or IPv6 format, or enter a DNS name.
4. Click Add.
The new IP address is displayed in the Syslog IP area.
5. Click Apply.
Removing a syslog IP address
1. Open the Switch Administration window as described on page 31.
2. Click the Network tab.
3. Select a syslog IP in the table and click Remove.
You can click Clear All to remove all of the syslog IP addresses from the table.
4. Click Apply.
Setting Up IP Filtering
Web Tools provides the ability to control what client IP addresses may connect to a switch or fabric.
1. Open the Switch Administration window as described on page 31.
2. Click the Security Policies tab.
3. Click IPFilter on the Security Policies menu.
4. Click Create Policy.
The Create IP Filter Policy window opens.
5. Enter a policy name, choose a policy type, and then click the Add Rule button.
6. Enter the rule order and source IP address, and modify the service/destination port, protocol,
and action as necessary.
7. Cli ck OK.
After you create a policy, you can use the controls on this tab to manage the policies:
• The Edit Policy button lets you select an existing policy and make changes to it.
• The Show Policy button lets you view the details of the policy in a read-only window.
• The Delete Policy button lets you delete a policy.
• The Clone Policy button lets you copy a policy. Use this feature when you want to create
similar policies. After you create a clone, you can edit the policy to make the appropriate
changes.
• The Activate Policy button lets you make an existing policy active.
• The Distribute Policy button lets you distribute a policy to various switches.
• The Accepts Distribution check box lets you set the policy to accept or reject distributions.