Brocade Web Tools Administrator's Guide v6.1.0 (53-1000606-02, June 2008)

76 Web Tools Administrator’s Guide
53-1000606-02
Swapping port index
5
When you perform a port swap, Web Tools automatically disables the two ports, swaps the area
IDs, and enables the ports.
Swapping ports
1. Click a port in the Switch View to open the Port Administration window.
2. Click the FC Ports tab.
3. Click the Advanced button.
4. From the tree on the left, select the port you want to swap.
5. Click the Port Swap button.
6. Type the number of the port with which you want to swap the current port. If the port is on a
blade, you must also provide the slot number.
7. Cli ck Swap.
Determining if a port index has been swapped with another switch port
1. Click a port in the Switch View to open the Port Administration window.
2. Click the FC Ports tab.
3. Click the Advanced button.
4. From the tree on the left, select the port you want to swap.
5. Click the General tab.
The Port Index attribute on the General tab indicates whether a port has been swapped. For
ports that have been swapped, the attribute name displays as Port Index (Swapped), as shown
in Figure 36. The value indicates with which port index the port has been swapped.