HP StorageWorks B-series Data Center Fabric Manager Professional 10.1.x Release Notes (5697-0804 July 2009 - includes all 10.1.x versions)

ManualsBrandsHP ManualsStorageHP 8/24 SAN Switch with 16-ports Enabled plus (16) SFP+ Transceivers/S-Buy

NOTE:

Be sure to install the DCFM application on a dedicated machine that is not running any other server

applications, such as another database server.

Documentation updates

There are no documentation updates with this release.

DCFM 10.1.0 fixes

Table 3 lists defects closed in the DCFM 10.1.0 release.

Table 3 DCFM 10.1.0 closed defects

SolutionClosed defect summary

Fixed in DCFM 10.1.0

Workaround—Navigate to the correct help section by

launching the main help dialog.

Help dialog is not launched for Technical Support Data

Collection dialog.

Fixed in DCFM 10.1.0

Workaround—The values can be obtained from

CLI/WT.

Location, Description, and Contact column details are

not populated in the Product List.

Symptom—The user does not see any values for

Location, Contact, and Description columns in Product

list.

Fixed in DCFM 10.1.0

Workaround—Configure clockserver parameter

from CLI using command configdownload.

Configuring NTP clockserver parameters fails from

DCFM.

Symptom—User will not be able to configure

clockserver parameter from DCFM. Also a success

message is displayed for the failed operation.

Fixed in DCFM 10.1.0Call home are not getting generated when a DCFM

server is configured with IPv6 address.

Symptom—User will not receive Call Home if DCFM

server configured with IPv6 address.

Fixed in DCFM 10.1.0

Workaround—View correct N_Port mappings through

the ag –mapshow CLI command executed on the

AG.

Altering the N_Port to F_Port mappings of an Access

Gateway is not updated on the host group of product

list device tree.

Symptom—User views incorrect N_Port mappings in

the host group of the product list device tree, when

the N_Port mapset of an Access Gateway is changed.

Fixed in DCFM 10.1.0Unable to see all toolbar buttons at once in View

Reports dialog when there are no reports.

Symptom—Customer is unable to see all the toolbar

buttons at once in the View Reports dialog when there

are no reports.