HP StorageWorks B-series Data Center Fabric Manager Professional 10.1.x Release Notes (5697-0804 July 2009 - includes all 10.1.x versions)

SolutionClosed defect summary
Fixed in DCFM 10.1.0Setup Tools configuration is not migrated from EFCM
to DCFM.
Symptom—Setup Tools configuration is not migrated
from EFCM to DCFM 10.0.2.
Fixed in DCFM 10.1.0DCFM message “TI zones will be activated when
saving zone DB”.
Symptom—After saving the zoning db, a DCFM
message appears saying that the TI zones will be
activated.
Fixed in DCFM 10.1.0
Workaround—Run cfgEnable from the CLI.
TI Zones are not becoming active after clicking
nl
Activate.
Fixed in DCFM 10.1.0EGM license is prompted on HP StorageWorks 4/256
SAN Director.
Fixed in DCFM 10.1.0
Workaround—Use only one particular Mi10k switch
at a time for performance monitoring and do not
including ports from another switch.
DCFM displays a message for EGM license for Mi10k
switch in performance port picker.
Symptom—When a user chooses a Mi10k port along
with another switch's port, an EGM license message
appears.
Fixed in DCFM 10.1.0EWS Wrong User Name - Password Combination.
Symptom—DCFM server is trying to login to EWS of
M6140 with the USERID of ROOT. Received events,
"EWS Wrong User Name - Password Combination".
Fixed in DCFM 10.1.0Confusing message when Hex mode is selected on
DCFM.
Fixed in DCFM 10.1.0Drop-down menu items for the SAME object differ
depending on where the user right-clicks the mouse.
Fixed in DCFM 10.1.0Event log repeatedly showed the message “Total
memory usage is greater than the configured
threshold”.
Symptom—In the master log, a message indicating
total memory usage greater than the configured
threshold may appear repeatedly.
Fixed in DCFM 10.1.0
Workaround—Choose the IPv4 address.
The server to switch default should be IPv4 instead of
IPv6 when both exist.
Symptom—IPv6 address chosen as the default even
though IPv4 is more prevalent in the installed world.
IPv4 address must be chosen if you need IPv4 access.
Fixed in DCFM 10.1.0
Workaround—Enter the documented values (minimum
of 512).
Options Memory Allocation SAN size drop-down
menu is not setting the correct mem size.
Symptom—Resetting client memory size using small,
medium, and large in SAN > Options creates the
wrong value.
HP StorageWorks B-series Data Center Fabric Manager Professional 27