HP StorageWorks B-series Data Center Fabric Manager Professional 10.1.x Release Notes (5697-0804 July 2009 - includes all 10.1.x versions)

ManualsBrandsHP ManualsStorageHP 8/24 SAN Switch with 16-ports Enabled plus (16) SFP+ Transceivers/S-Buy

SolutionClosed defect summary

Fixed in DCFM 10.1.3The Port Optics dialog does not display information for nondefault lo-

gical switches.

Fixed in DCFM 10.1.3

DCFM now prevents the user from

adding port numbers higher than 31

to a logical switch configured for the

256 area limit with port-based area

assignment.

DCFM incorrectly allows assigning port numbers higher than 32 on a

48-port blade to a logical switch if the 256 area limit is set with a port-

based area assignment. It also allows setting the 256 area limit if the

logical switch already has ports higher than 31.

Fixed in DCFM 10.1.3Changes made in the client export port are not effective after a client

restart in DCFM 10.1.2. or earlier.

Fixed in DCFM 10.1.3

Workaround—Exit the client and

then re-launch it.

After a storage array is created, the connection between the storage

array and the switch is not displayed in the topology view.

Fixed in DCFM 10.1.3DCFM is unable to recognize a smartcard reader on a local client on

Linux or Solaris hosts because the Libpcsclite.so file is not included

in the DCFM installation.

Fixed in DCFM 10.1.3Web Linker crashes when Top Talkers is enabled for the Brocade 200E

in DCFM.

Symptom—Some of the switch processes are terminated and switch

performance is reduced.

DCFM 10.1.4 fixes

Table 5 lists defects closed in the DCFM 10.1.4 release.

Table 5 DCFM 10.1.4 closed defects

SolutionClosed defect summary

Fixed in DCFM 10.1.4When historical performance data collection is enabled, DCFM can

experience slower response times. This is due to an increase in the number

of performance records in the database, and can eventually cause the

disk to run out of space.

Fixed in DCFM 10.1.4All zoning transactions using DCFM are aborted on a virtual fabric.

However, the same zoning transactions are processed successfully using

the CLI.

Fixed in DCFM 10.1.4FTP-related operations from the internal FTP server fail.

Fixed in DCFM 10.1.4In an FCR/FCIP configuration, the LSAN soning dialog box does not dis-

play edge fabrics if the FID is set to 1.

Fixed in DCFM 10.1.4

Workaround prior to this upgrade:

You could avoid this issue by

using the CLI to create and config-

ure logical switches.

Occasionally, after creating logical switches and adding ports to each of

them, the logical switch change confirmation and status shows one or

more of the logical switch configurations failed.

HP StorageWorks B-series Data Center Fabric Manager Professional 33