53-1001156-01 24 November 2008 Fabric OS MIB Reference Supporting Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.x, v5.0.x, v5.1.x, v5.2.x, v5.3.x, v6.0.0, v6.1.0, v6.2.
Copyright © 2007-2008 Brocade Communications Systems, Inc. All Rights Reserved. Brocade, Fabric OS, File Lifecycle Manager, MyView, and StorageX are registered trademarks and the Brocade B-wing symbol, DCX, and SAN Health are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. All other brands, products, or service names are or may be trademarks or service marks of, and are used to identify, products or services of their respective owners.
Document History Document Title Publication Number Summary of Changes Publication Date Brocade MIB Reference Manual v2.3 53-0000069-02 December 2000 Brocade MIB Reference Manual v3.0 53-0000134-03 July 2001 Brocade MIB Reference Manual v3.0, 4.0 53-0000184-02 March 2002 Brocade MIB Reference Manual (v4.1, v4.0.x, v3.1, v3.0.x, v2.6.x) 53-0000521-02 Added Brocade-specific Entity and HA-MIBs. Brocade MIB Reference Manual (v4.1.2, v4.1, v4.0.x, v3.1, v3.0.x, v2.6.
Contents About This Document In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . xii What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2 MIB-II (RFC1213-MIB) MIB II Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 System Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Interfaces Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 AT Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 IP Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Logical Entity Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .480 Entity Mapping Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .490 General Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500 Entity MIB Trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .501 Entity MIB Conformance Information. . . . . . . . . . . . . . . . . . . . . . . .
ficonRNID Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .811 ficonLIRR Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .841 ficonRLIR Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .851 linkIncidentMIBTraps Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .867 Chapter 8 FibreAlliance MIB Objects FibreAlliance MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ISL and End Device Variables. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1196 SNMP Configuration Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . 1196 iSCSI Instance Information Variables . . . . . . . . . . . . . . . . . . . . . .1197 Appendix B MIB OIDs and Their Matching Object Names MIB OIDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
x Fabric OS MIB Reference 53-1001156-01
About This Document In this chapter • How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi • Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii • What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii • Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii • Additional information . . . . . . . . . .
Supported hardware and software In those instances in which procedures or parts of procedures documented here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware configurations are tested and supported by Brocade Communications Systems, Inc. for 6.2.0, documenting all possible configurations and scenarios is beyond the scope of this document. This document supports Brocade Fabric OS versions v6.
• FC8-32 Blade • FC8-48 Blade What’s new in this document The following changes have been made since this document was last released: • Information that was added: - Support for Brocade DCX-4S and Brocade Encrytion Switch - swTopTalker MIB - Support for Virtual Fabric - New attributes added to the following: • fcipExtendedLinkTable • swFCport Hierarchy • swfabric Hierarchy • swSystem Hierarchy • swTrapsV2 • Information that was changed: - Miscellaneous additions and corrections have been made throughout F
For readability, command names in the narrative portions of this guide are presented in mixed lettercase: for example, switchShow. In actual examples, command lettercase is often all lowercase. Otherwise, this manual specifically notes those cases in which a command is case sensitive. Notes, cautions, and warnings The following notices and statements are used in this manual. They are listed below in order of increasing severity of potential hazards.
Corporation Referenced Trademarks and Products Microsoft Corporation Windows, Windows NT, Internet Explorer Sun Microsystems, Inc. Sun, Solaris Additional information This section lists additional Brocade and industry-specific documentation that you might find helpful. Brocade resources To get up-to-the-minute information, join Brocade Connect. It’s free! Go to http://www.brocadeconnect.com to register at no cost for a user ID and password.
• Description of any troubleshooting steps already performed and the results • Serial console and Telnet session logs • Syslog message logs 2.
Chapter 1 Understanding Brocade SNMP In this chapter • Setting the SNMP Security Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • Understanding SNMP Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Loading Brocade MIBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 • Brocade 7500 / FR4-18i and Brocade MIBs. . . . . . . . . . . . . . . . . . . . . . . . . 11 • Firmware Upgrades and Enabled Traps .
1 Understanding SNMP Basics TABLE 1 Security Level Options (Continued) security level Protocol Query Behavior Traps Authentication and Privacy [2] (authPriv) SNMPv1 SNMPv3 Not allowed. Only SNMPv3 users with authPriv privilege are allowed. Not Sent. Sent only for authPriv users. No Access [3] SNMPv1 SNMPv3 Not allowed. Not Sent. Understanding SNMP Basics Every Brocade switch carries an agent and management information base (MIB), as shown in Figure 1.
Understanding SNMP Basics 1 Understanding MIBs The management information base (MIB) is a database of monitored and managed information on a device, in this case a Brocade switch. The MIB structure can be represented by a tree hierarchy. The root splits into three main branches: International Organization for Standardization (ISO), Consultative Committee for International Telegraph and Telephone (CCITT), and joint ISO/CCITT. These branches have short text strings and integers (OIDs) to identify them.
1 Understanding SNMP Basics Brocade supports FE_RCF2837.mib under the MIB-II branch in Fabric OS v6.2.0, v6.1.0, v6.0.0, v4.x, v3.2.0, and v3.1.x and the experimental version, FE_EXP.mib, in Fabric OS v2.6.x and 3.0.x. This latest version of the FE MIB references the FRAMEWORK.MIB and, based on the MIB browser, it is necessary to load this MIB before the FE.MIB. Refer to “Loading Brocade MIBs” on page 6 for more information.
Understanding SNMP Basics 1 • connUnitPortStatusChange • connUnitEventTrap The MIB-II system description swEventTrapLevel determines the output for the connUnitEventTrap. Events in the Error Log of a severity at or above the configured threshold will generate SNMP traps. The Fibre Alliance Trap (FA-TRAP) can be configured to send traps using the snmpConfig command. Refer to the Fabric OS Command Reference for more information on this command.
1 Loading Brocade MIBs Object Instances MIB objects are defined by the OID, which is the type of object, and by the instance number, which is an instance of that MIB object. A Fibre Channel port is a MIB object, and port 0 is an instance of that object. The following is an OID number and an instance number: 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11.5 where: 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 is the OID (of swFCPortTxWords) and 5 is the instance ID for port 4.
Loading Brocade MIBs TABLE 2 Fabric OS Supported SNMP Versions Firmware SNMPv1 SNMPv2 SNMPv3 Fabric OS v2.6.2 and previous Yes No1 No Yes 1 No 1 No 1 Fabric OS v3.2.0 and previous Fabric OS v4.2.0 and previous Yes No No Fabric OS v4.4.0 Yes No Yes2 Fabric OS v5.x Yes Yes3 Yes2 Fabric OS v6.0.0 Yes Yes Yes Fabric OS v6.1.0 Yes Yes Yes Fabric OS v6.2.0 Yes Yes Yes 1. 1 The corresponding Fabric OS has SNMPv2 capabilities, but it is not officially supported by Brocade.
1 Loading Brocade MIBs RFC1213-MIB MIB-II Select one Select one or both FA_v2_2.mib FCMGMT-MIB FOS 2.6.x FE_EXP.mib FCFABRIC-ELEMENT-MIB FE_RFC2837.mib FIBRE-CHANNEL-FE-MIB FOS 3.1.x, 4.x, 5.x FA_v3_0.mib FCMGMT-MIB FOS 3.x, 4.x, 5.x RFC1155-SMI FICON_v5_0.mib FICON-MIB FOS 4.x, 5.x BRCD_v5_0.mib Brocade-REG-MIB Brocade-TC FOS 2.6.x, 3.x, 4.x, 5.x SNMPv2-SMI INET-ADDRESS-MIB SW_v5_5.mib FOS 2.6.x, 3.x, 4.x, 5.x snmpUsmMIB User-based Security Model SMNPv2-TC HA_v5_1.mib HA-MIB FOS 4.x, v5.
Loading Brocade MIBs 1 Configuring SNMPv3 User/Traps 1. Create user on switch using CLI userconfig, with the required role. switch:admin> userconfig --add fa_adm -r fabricadmin -h0 -a 0-255 Setting initial password for fa_adm Enter new password:******** Re-type new password:******** Account fa_adm has been successfully added. switch:admin> Create user on switch in VF Context using CLI userconfig, with the required role.
1 Loading Brocade MIBs Trap Trap Trap Trap Recipient's Recipient's Recipient's Recipient's IP IP IP IP address address address address : : : : [0.0.0.0] [0.0.0.0] [0.0.0.0] [0.0.0.0] Committing configuration...done.
Brocade 7500 / FR4-18i and Brocade MIBs 1 Brocade 7500 / FR4-18i and Brocade MIBs Beginning with release Fabric OS 5.3.0, statistics are available for FCIP tunnels, VEX_Ports, or VE_Ports through the portstatsshow command. The changes in the sensor details for FR4-18i Blade has been incorporated into SNMP. The “connUnitSensorTable 1.3.6.1.3.94.1.8” on page 920 and “swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22” on page 552 display information consistent with the Fabric OS sensorShow command.
1 Fabric OS Commands for Configuring SNMP Fabric OS Commands for Configuring SNMP Use the following commands to configure MIBs in the Fabric OS. Refer to the Fabric OS Administrator’s Guide for procedures for configuring SNMP on the Brocade switches. TABLE 4 Commands for Configuring SNMP Command Description snmpConfig This command has all the features of the existing the agtcfg* commands; in addition, it has SNMPv3 configuration parameters. snmpMibCapSet Enhanced in Fabric OS v4.
Chapter MIB-II (RFC1213-MIB) 2 This chapter provides descriptions and other information specific to MIB-II, and includes the following sections: • MIB II Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • System Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 • Interfaces Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 • AT Group .
2 MIB-II Object Hierarchy MIB-II Object Hierarchy Figure 6 through Figure 15 depicts the organization and structure of MIB-II. - iso - org - dod - internet - directory - mgmt - mib-2 - system - interfaces - at - ip - icmp - tcp - udp - egp - transmission - snmp - iFMIB FIGURE 6 MIB-II Overall Hierarchy - system (1.3.6.1.2.1.1) - sysDescr 1.3.6.1.2.1.1.1 - sysObjectID 1.3.6.1.2.1.1.2 - sysUpTime 1.3.6.1.2.1.1.3 - sysContact 1.3.6.1.2.1.1.4 - sysName 1.3.6.1.2.1.1.5 - sysLocation 1.3.6.1.2.1.1.
MIB-II Object Hierarchy 2 - interfaces (1.3.6.1.2.1.2) - ifNumber 1.3.6.1.2.1.2.1 - ifTable 1.3.6.1.2.1.2.2 - ifEntry 1.3.6.1.2.1.2.2.1 - ifIndex 1.3.6.1.2.1.2.2.1.1 - ifDescr 1.3.6.1.2.1.2.2.1.2 - ifType 1.3.6.1.2.1.2.2.1.3 - ifMtu 1.3.6.1.2.1.2.2.1.4 - ifSpeed 1.3.6.1.2.1.2.2.1.5 - ifPhysAddress 1.3.6.1.2.1.2.2.1.6 - ifAdminStatus 1.3.6.1.2.1.2.2.1.7 - ifOperStatus 1.3.6.1.2.1.2.2.1.8 - ifLastChange 1.3.6.1.2.1.2.2.1.9 - ifInOctets 1.3.6.1.2.1.2.2.1.10 - ifInUcastPkts 1.3.6.1.2.1.2.2.1.
2 MIB-II Object Hierarchy - ip (1.3.6.1.2.1.4) - ipForwarding 1.3.6.1.2.1.4.1 - ipDefaultTTL 1.3.6.1.2.1.4.2 - ipInReceives 1.3.6.1.2.1.4.3 - ipInHdrErrors 1.3.6.1.2.1.4.4 - ipInAddrErrors 1.3.6.1.2.1.4.5 - ipForwDatagrams 1.3.6.1.2.1.4.6 - ipInUnknownProtos 1.3.6.1.2.1.4.7 - ipInDiscards 1.3.6.1.2.1.4.8 - ipInDelivers 1.3.6.1.2.1.4.9 - ipOutRequests 1.3.6.1.2.1.4.10 - ipOutDiscards 1.3.6.1.2.1.4.11 - ipOutNoRoutes 1.3.6.1.2.1.4.12 - ipReasmTimeout 1.3.6.1.2.1.4.13 - ipReasmReqds 1.3.6.1.2.1.4.
MIB-II Object Hierarchy 2 - icmp (1.3.6.1.2.1.5) - icmpInMsgs 1.3.6.1.2.1.5.1 - icmpInErrors 1.3.6.1.2.1.5.2 - icmpInDestUnreachs 1.3.6.1.2.1.5.3 - icmpInTimeExcds 1.3.6.1.2.1.5.4 - icmpInParmProbs 1.3.6.1.2.1.5.5 - icmpInSrcQuenchs 1.3.6.1.2.1.5.6 - icmpInRedirects 1.3.6.1.2.1.5.7 - icmpInEchos 1.3.6.1.2.1.5.8 - icmpInEchoReps 1.3.6.1.2.1.5.9 - icmpInTimestamps 1.3.6.1.2.1.5.10 - icmpInTimestampReps 1.3.6.1.2.1.5.11 - icmpInAddrMasks 1.3.6.1.2.1.5.12 - icmpInAddrMaskReps 1.3.6.1.2.1.5.13 - icmpOutMsgs 1.
2 MIB-II Object Hierarchy - tcp - (1.3.6.1.2.1.6) tcpRtoAlgorithm 1.3.6.1.2.1.6.1 tcpRtoMin 1.3.6.1.2.1.6.2 tcpRtoMax 1.3.6.1.2.1.6.3 tcpMaxConn 1.3.6.1.2.1.6.4 tcpActiveOpens 1.3.6.1.2.1.6.5 tcpPassiveOpens 1.3.6.1.2.1.6.6 tcpAttemptFails 1.3.6.1.2.1.6.7 tcpEstabResets 1.3.6.1.2.1.6.8 tcpCurrEstab 1.3.6.1.2.1.6.9 tcpInSegs 1.3.6.1.2.1.6.10 tcpOutSegs 1.3.6.1.2.1.6.11 tcpRetransSegs 1.3.6.1.2.1.6.12 tcpConnTable 1.3.6.1.2.1.6.13 - tcpConnEntry 1.3.6.1.2.1.6.13.1 - tcpConnState 1.3.6.1.2.1.6.13.1.
MIB-II Object Hierarchy 2 - egp - (1.3.6.1.2.1.8) Transmission Group egpInErrors egpOutMsgs egpOutErrors egpNeighTable - egpNeighEntry - egpNeighState - egpNeighAddr - egpNeighAs - egpNeighInMsgs - egpNeighInErrs - egpNeighOutMsgs - egpNeighOutErrs - egpNeighInErrMsgs - egpNeighOutErrMsgs - egpNeighStateUps - egpNeighStateDowns - egpNeighIntervalHello - egpNeighIntervalPoll - egpNeighMode - egpNeighEventTrigger - egpAs FIGURE 14 egp Hierarchy - snmp (1.3.6.1.2.1.11) - snmpInPkts 1.3.6.1.2.1.11.
2 MIB-II Object Hierarchy - ifMIB (1.3.6.1.2.1.31) - ifXTable 1.3.6.1.2.1.31.1.1 - ifXentry 1.3.6.1.2.1.31.1.1.1 - ifName 1.3.6.1.2.1.31.1.1.1.1 - ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 - ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 - ifOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.4 - ifOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.5 - ifHCInOctets 1.3.6.1.2.1.31.1.1.1.6 - ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 - ifHCInMulticastPkts 1.3.6.1.2.1.31.1.1.1.8 - ifHCInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.9 - ifHCOutOctets 1.3.6.
Textual Conventions 2 Textual Conventions Table 5 lists the textual conventions used for MIB-II.
2 System Group System Group All systems must implement the System Group. If an agent is not configured to have a value for any of the System Group variables, a string of length 0 is returned. sysDescr 1.3.6.1.2.1.1.1 A textual description of the entity. This value should include the full name and version identification of the hardware type, software operating system, and networking software. Format Set command Default 22 This must contain only printable ASCII characters.
sysObjectID 1.3.6.1.2.1.1.2 2 sysObjectID 1.3.6.1.2.1.1.2 The vendor’s authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining what kind of device is being managed. Example Default If a vendor “NetYarn, Inc.” was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its “Knit Router”. The device type.
2 sysUpTime 1.3.6.1.2.1.1.3 sysUpTime 1.3.6.1.2.1.1.3 The time (in hundredths of a second) since the network management portion of the system was last reinitialized. Set command 24 Set this value using the switchuptime command.
sysContact 1.3.6.1.2.1.1.4 2 sysContact 1.3.6.1.2.1.1.4 The textual identification of the contact person for this managed node, together with information on how to contact this person. Default Set command Field Support Set this value using the snmpconfig command.
2 sysName 1.3.6.1.2.1.1.5 sysName 1.3.6.1.2.1.1.5 An administratively assigned name for this managed node. By convention, this is the node’s fully qualified domain name. Default Set command 26 Preassigned name of the logical switch. Set this value using the snmpconfig command.
sysLocation 1.3.6.1.2.1.1.6 2 sysLocation 1.3.6.1.2.1.1.6 The physical location of this node (for example, telephone closet, 3rd floor). Default Set command End User Premise Set this value using the snmpconfig command.
2 sysServices 1.3.6.1.2.1.1.7 sysServices 1.3.6.1.2.1.1.7 A value that indicates the set of services that this entity primarily offers.The value is a sum. This sum initially takes the value 0. Then, for each layer, L, in the range 1 through 7, for which this node performs transactions, 2 raised to (L - 1) is added to the sum. For example, a node that primarily performs routing functions has a value of 4 (23-1).
Interfaces Group 2 Interfaces Group Implementation of the Interfaces group is mandatory for all systems. FCIP tunnel support is added in Fabric OS 5.3.0 and higher. To support FCIP tunneling, entries are created in the ifTable for each WAN interface (GbE port), each FC port, and each FCIP tunnel (transport interface). Logical Inter Switch Link (LISL) is an FC interface.
2 ifNumber 1.3.6.1.2.1.2.1 ifNumber 1.3.6.1.2.1.2.1 The number of network interfaces and existing FC ports present on this system, regardless of their current state. This number will vary across platforms (switches). The return value is dynamic for all Brocade switches and depends on the number of GbE ports, FC ports and transport interfaces.
ifTable 1.3.6.1.2.1.2.2 2 ifTable 1.3.6.1.2.1.2.2 A list of interface entries. The number of entries is given by the value of ifNumber. The Interfaces table contains information on the entity’s interfaces. Each interface is thought of as being attached to a subnetwork. Note that this term should not be confused with subnet, which refers to an addressing partitioning scheme used in the Internet suite of protocols.
2 ifEntry 1.3.6.1.2.1.2.2.1 ifEntry 1.3.6.1.2.1.2.2.1 An interface entry containing objects at the subnetwork layer and below, for a particular interface.
ifIndex 1.3.6.1.2.1.2.2.1.1 2 ifIndex 1.3.6.1.2.1.2.2.1.1 A unique value for each interface. The values range between 1 and the value of ifNumber. The value for each interface must remain constant, at least from one reinitialization of the entity's network management system to the next reinitialization. For Network Interface, the number starts from 805306369 and increments with the interface count. For FC Ports, the number starts from 1073741824 and increments with the existing FC Ports.
2 ifDescr 1.3.6.1.2.1.2.2.1.2 ifDescr 1.3.6.1.2.1.2.2.1.2 A textual string containing information about the interface. The ifDescr for non-bladed switches includes: lo, eth0, and fc0. The ifDescr for Brocade 12000, 24000, and 48000 directors includes: lo, eth0, fc0, and sit0, as well as fc1, eth0:1, and eth0:2.
ifType 1.3.6.1.2.1.2.2.1.3 2 ifType 1.3.6.1.2.1.2.2.1.3 The type of interface, designated by the physical/link protocol(s) immediately below the network layer in the protocol stack.
2 ifMtu 1.3.6.1.2.1.2.2.1.4 ifMtu 1.3.6.1.2.1.2.2.1.4 The size of the largest datagram that can be sent/received on the interface, specified in octets. Values For interfaces that are used to transmit network datagrams, the value is the size of the largest network datagram that can be sent on the interface (these values are different for Fabric OS v4.x).
ifSpeed 1.3.6.1.2.1.2.2.1.5 2 ifSpeed 1.3.6.1.2.1.2.2.1.5 An estimate (in bits per second) of the interface's current bandwidth. Values For interfaces that do not vary in bandwidth or interfaces for which no accurate estimation can be made, this object should contain the nominal bandwidth. For Fabric OS v4.x, 2 Gbps returns.
2 ifPhysAddress 1.3.6.1.2.1.2.2.1.6 ifPhysAddress 1.3.6.1.2.1.2.2.1.6 The interface's address at the protocol layer immediately below the network layer in the protocol stack. Values For interfaces that do not have such an address (for example, a serial line), this object should contain an octet string of zero length.
ifAdminStatus 1.3.6.1.2.1.2.2.1.7 2 ifAdminStatus 1.3.6.1.2.1.2.2.1.7 The desired state of the interface. Values • up (1) • down (2) or • testing (3) Supports Read only, should return same value with ifOperStatus for WAN and FC ports interfaces. NOTE The 3 state (testing) indicates that no operational packets can be passed. This object is read-only in Fabric OS v4.x and above.
2 ifOperStatus 1.3.6.1.2.1.2.2.1.8 ifOperStatus 1.3.6.1.2.1.2.2.1.8 The current operational state of the interface. Values • up (1) • down (2) or • testing (3?) Active tunnels will be up; inactive tunnels will be down (configured but not online). NOTE .The 3 state (testing) indicates that no operational packets can be passed.
ifLastChange 1.3.6.1.2.1.2.2.1.9 2 ifLastChange 1.3.6.1.2.1.2.2.1.9 The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.
2 ifInOctets 1.3.6.1.2.1.2.2.1.10 ifInOctets 1.3.6.1.2.1.2.2.1.10 The total number of octets received on the interface, including framing characters.
ifInUcastPkts 1.3.6.1.2.1.2.2.1.11 2 ifInUcastPkts 1.3.6.1.2.1.2.2.1.11 The number of subnetwork-unicast packets delivered to a higher-layer protocol. Not supported.
2 ifInNUcastPkts 1.3.6.1.2.1.2.2.1.12 ifInNUcastPkts 1.3.6.1.2.1.2.2.1.12 The number of nonunicast packets (for example, subnetwork-broadcast or subnetwork-multicast) delivered to a higher-layer protocol. Not supported.
ifInDiscards 1.3.6.1.2.1.2.2.1.13 2 ifInDiscards 1.3.6.1.2.1.2.2.1.13 The number of inbound packets that were chosen to be discarded (even though no errors had been detected) to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free buffer space.
2 ifInErrors 1.3.6.1.2.1.2.2.1.14 ifInErrors 1.3.6.1.2.1.2.2.1.14 The number of inbound packets that contained errors, which thereby prevented them from being deliverable to a higher-layer protocol.
ifInUnknownProtos 1.3.6.1.2.1.2.2.1.15 2 ifInUnknownProtos 1.3.6.1.2.1.2.2.1.15 The number of packets received by way of the interface that were discarded because of an unknown or unsupported protocol. Not supported.
2 ifOutOctets 1.3.6.1.2.1.2.2.1.16 ifOutOctets 1.3.6.1.2.1.2.2.1.16 The total number of octets transmitted out of the interface, including framing characters.
ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17 2 ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17 The total number of packets that were requested, by higher-level protocols, to be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. Not supported.
2 ifOutNUcastPkts 1.3.6.1.2.1.2.2.1.18 ifOutNUcastPkts 1.3.6.1.2.1.2.2.1.18 The total number of packets that were requested, by higher-level protocols, to be transmitted to a nonunicast address (for example, a subnetwork-broadcast or subnetwork-multicast), including those that were discarded or not sent. Not supported.
ifOutDiscards 1.3.6.1.2.1.2.2.1.19 2 ifOutDiscards 1.3.6.1.2.1.2.2.1.19 The number of outbound packets that were chosen to be discarded (even though no errors had been detected) to prevent their being transmitted. One possible reason for discarding such a packet could be to free buffer space.
2 ifOutErrors 1.3.6.1.2.1.2.2.1.20 ifOutErrors 1.3.6.1.2.1.2.2.1.20 The number of outbound packets that could not be transmitted because of errors.
ifOutQLen 1.3.6.1.2.1.2.2.1.21 2 ifOutQLen 1.3.6.1.2.1.2.2.1.21 The length of the output packet queue (in packets). Not supported.
2 ifSpecific 1.3.6.1.2.1.2.2.1.22 ifSpecific 1.3.6.1.2.1.2.2.1.22 A reference to MIB definitions specific to the particular media being used to realize the interface. If the interface is realized by an Ethernet, then the value of this object refers to a document defining objects specific to Ethernet. If this information is not present, its value should be set to the Object Identifier 0 0, which is a syntactically valid object identifier, and any conferment implementation of ASN.
AT Group 2 AT Group Implementation of the Address Translation group is mandatory for all systems. Note, however, that this group is deprecated by MIB-II. From MIB-II onward, each network protocol group contains its own address translation tables.
2 atTable 1.3.6.1.2.1.3.1 atTable 1.3.6.1.2.1.3.1 The Address Translation group contains one table, which is the union across all interfaces of the translation tables for converting a network address (for example, an IP address) into a subnetwork-specific address. This document refers to such a subnetwork-specific address as a physical address. For example, for broadcast media, where ARP is in use, the translation table is equivalent to the ARP cache; on an X.
atEntry 1.3.6.1.2.1.3.1.1 2 atEntry 1.3.6.1.2.1.3.1.1 Each entry contains one network address to physical address equivalence.
2 atIfIndex 1.3.6.1.2.1.3.1.1.1 atIfIndex 1.3.6.1.2.1.3.1.1.1 The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
atPhysAddress 1.3.6.1.2.1.3.1.1.2 2 atPhysAddress 1.3.6.1.2.1.3.1.1.2 The media-dependent physical address.
2 atNetAddress 1.3.6.1.2.1.3.1.1.3 atNetAddress 1.3.6.1.2.1.3.1.1.3 The network address (for example, the IP address) corresponding to the media-dependent physical address.
IP Group 2 IP Group Implementation of the IP group is mandatory for all systems.
2 ipForwarding 1.3.6.1.2.1.4.1 ipForwarding 1.3.6.1.2.1.4.1 The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams; IP hosts do not (except those source-routed through the host).
ipDefaultTTL 1.3.6.1.2.1.4.2 2 ipDefaultTTL 1.3.6.1.2.1.4.2 The default value inserted into the time-to-live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
2 ipInReceives 1.3.6.1.2.1.4.3 ipInReceives 1.3.6.1.2.1.4.3 The total number of input datagrams received from interfaces, including those received in error.
ipInHdrErrors 1.3.6.1.2.1.4.4 2 ipInHdrErrors 1.3.6.1.2.1.4.4 The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, and so on.
2 ipInAddrErrors 1.3.6.1.2.1.4.5 ipInAddrErrors 1.3.6.1.2.1.4.5 The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (for example, 0.0.0.0) and addresses of unsupported classes (for example, Class E).
ipForwDatagrams 1.3.6.1.2.1.4.6 2 ipForwDatagrams 1.3.6.1.2.1.4.6 The number of input datagrams for which this entity was not final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities that do not act as IP gateways, this counter includes only those packets that were source-routed through this entity, and the Source-Route option processing was successful.
2 ipInUnknownProtos 1.3.6.1.2.1.4.7 ipInUnknownProtos 1.3.6.1.2.1.4.7 The number of locally addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
ipInDiscards 1.3.6.1.2.1.4.8 2 ipInDiscards 1.3.6.1.2.1.4.8 The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (for example, for lack of buffer space). This counter does not include any datagrams discarded while awaiting reassembly.
2 ipInDelivers 1.3.6.1.2.1.4.9 ipInDelivers 1.3.6.1.2.1.4.9 The total number of input datagrams successfully delivered to IP user protocols (including ICMP).
ipOutRequests 1.3.6.1.2.1.4.10 2 ipOutRequests 1.3.6.1.2.1.4.10 The total number of IP datagrams that local IP user protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
2 ipOutDiscards 1.3.6.1.2.1.4.11 ipOutDiscards 1.3.6.1.2.1.4.11 The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (for example, for lack of buffer space). NOTE This counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
ipOutNoRoutes 1.3.6.1.2.1.4.12 2 ipOutNoRoutes 1.3.6.1.2.1.4.12 The number of IP datagrams discarded because no route could be found to transmit them to their destination. NOTE This counter includes any packets counted in ipForwDatagrams that meet this “no-route” criterion. Note that this includes any datagrams that a host cannot route because all of its default gateways are down.
2 ipReasmTimeout 1.3.6.1.2.1.4.13 ipReasmTimeout 1.3.6.1.2.1.4.13 The maximum number of seconds that received fragments are held while they are awaiting reassembly at this entity.
ipReasmReqds 1.3.6.1.2.1.4.14 2 ipReasmReqds 1.3.6.1.2.1.4.14 The number of IP fragments received that needed to be reassembled at this entity.
2 ipReasmOKs 1.3.6.1.2.1.4.15 ipReasmOKs 1.3.6.1.2.1.4.15 The number of IP datagrams successfully reassembled.
ipReasmFails 1.3.6.1.2.1.4.16 2 ipReasmFails 1.3.6.1.2.1.4.16 The number of failures detected by the IP reassembly algorithm (for whatever reason: timed out, errors, and so on). NOTE This is not necessarily a count of discarded IP fragments, because some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
2 ipFragOKs 1.3.6.1.2.1.4.17 ipFragOKs 1.3.6.1.2.1.4.17 The number of IP datagrams that have been successfully fragmented at this entity.
ipFragFails 1.3.6.1.2.1.4.18 2 ipFragFails 1.3.6.1.2.1.4.18 The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be (for example, because their Don't Fragment flag was set).
2 ipFragCreates 1.3.6.1.2.1.4.19 ipFragCreates 1.3.6.1.2.1.4.19 The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
ipAddrTable 1.3.6.1.2.1.4.20 2 ipAddrTable 1.3.6.1.2.1.4.20 The table of addressing information relevant to this entity's IP addresses.
2 ipAddrEntry 1.3.6.1.2.1.4.20.1 ipAddrEntry 1.3.6.1.2.1.4.20.1 The addressing information for one of this entity's IP addresses.
ipAdEntAddr 1.3.6.1.2.1.4.20.1.1 2 ipAdEntAddr 1.3.6.1.2.1.4.20.1.1 The IP address to which this entry's addressing information pertains.
2 ipAdEntIfIndex 1.3.6.1.2.1.4.20.1.2 ipAdEntIfIndex 1.3.6.1.2.1.4.20.1.2 The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
ipAdEntNetMask 1.3.6.1.2.1.4.20.1.3 2 ipAdEntNetMask 1.3.6.1.2.1.4.20.1.3 The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.
2 ipAdEntBcastAddr 1.3.6.1.2.1.4.20.1.4 ipAdEntBcastAddr 1.3.6.1.2.1.4.20.1.4 The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.5 2 ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.5 The size of the largest IP datagram that this entity can reassemble from incoming IP fragmented datagrams received on this interface.
2 ipRouteTable 1.3.6.1.2.1.4.21 ipRouteTable 1.3.6.1.2.1.4.21 The IP routing table contains an entry for each route currently known to this entity.
ipRouteEntry 1.3.6.1.2.1.4.21.1 2 ipRouteEntry 1.3.6.1.2.1.4.21.1 A route to a particular destination.
2 ipRouteDest 1.3.6.1.2.1.4.21.1.1 ipRouteDest 1.3.6.1.2.1.4.21.1.1 The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use.
ipRouteIfIndex 1.3.6.1.2.1.4.21.1.2 2 ipRouteIfIndex 1.3.6.1.2.1.4.21.1.2 The index value that uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex.
2 ipRouteMetric1 1.3.6.1.2.1.4.21.1.3 ipRouteMetric1 1.3.6.1.2.1.4.21.1.3 The primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
ipRouteMetric2 1.3.6.1.2.1.4.21.1.4 2 ipRouteMetric2 1.3.6.1.2.1.4.21.1.4 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
2 ipRouteMetric3 1.3.6.1.2.1.4.21.1.5 ipRouteMetric3 1.3.6.1.2.1.4.21.1.5 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
ipRouteMetric4 1.3.6.1.2.1.4.21.1.6 2 ipRouteMetric4 1.3.6.1.2.1.4.21.1.6 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
2 ipRouteNextHop 1.3.6.1.2.1.4.21.1.7 ipRouteNextHop 1.3.6.1.2.1.4.21.1.7 The IP address of the next hop of this route. (In the case of a route bound to an interface that is realized through a broadcast media, the value of this field is the agent’s IP address on that interface.
ipRouteType 1.3.6.1.2.1.4.21.1.8 2 ipRouteType 1.3.6.1.2.1.4.21.1.8 The type of route. Setting this object to 2 (invalid) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
2 ipRouteProto 1.3.6.1.2.1.4.21.1.9 ipRouteProto 1.3.6.1.2.1.4.21.1.9 The routing mechanism by which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
ipRouteAge 1.3.6.1.2.1.4.21.1.10 2 ipRouteAge 1.3.6.1.2.1.4.21.1.10 The number of seconds since this route was last updated or otherwise determined to be correct. Older semantics cannot be implied except through knowledge of the routing protocol by which the route was learned.
2 ipRouteMask 1.3.6.1.2.1.4.21.1.11 ipRouteMask 1.3.6.1.2.1.4.21.1.11 The mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of the following: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.
ipRouteMetric5 1.3.6.1.2.1.4.21.1.12 2 ipRouteMetric5 1.3.6.1.2.1.4.21.1.12 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
2 ipRouteInfo 1.3.6.1.2.1.4.21.1.13 ipRouteInfo 1.3.6.1.2.1.4.21.1.13 A reference to MIB definitions specific to the particular routing protocol that is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the Object Identifier { 0 0 }, which is a syntactically valid object identifier; any conferment implementation of ASN.1 and BER must be able to generate and recognize this value.
ipNetToMediaTable 1.3.6.1.2.1.4.22 2 ipNetToMediaTable 1.3.6.1.2.1.4.22 The IP Address Translation table used for mapping from IP addresses to physical addresses. NOTE The IP address translation table contains the IP address to physical address equivalences. Some interfaces do not use translation tables for determining address equivalences. For example, DDN-X.25 has an algorithmic method; if all interfaces are of this type, then the Address Translation table is empty.
2 ipNetToMediaEntry 1.3.6.1.2.1.4.22.1 ipNetToMediaEntry 1.3.6.1.2.1.4.22.1 Each entry contains one IP address to physical address equivalence.
ipNetToMediaIfIndex 1.3.6.1.2.1.4.22.1.1 2 ipNetToMediaIfIndex 1.3.6.1.2.1.4.22.1.1 The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex.
2 ipNetToMediaPhysAddress 1.3.6.1.2.1.4.22.1.2 ipNetToMediaPhysAddress 1.3.6.1.2.1.4.22.1.2 The media-dependent physical address.
ipNetToMediaNetAddress 1.3.6.1.2.1.4.22.1.3 2 ipNetToMediaNetAddress 1.3.6.1.2.1.4.22.1.3 The IpAddress corresponding to the media-dependent physical address.
2 ipNetToMediaType 1.3.6.1.2.1.4.22.1.4 ipNetToMediaType 1.3.6.1.2.1.4.22.1.4 The type of mapping.
ipRoutingDiscards 1.3.6.1.2.1.4.23 2 ipRoutingDiscards 1.3.6.1.2.1.4.23 The number of routing entries discarded even though they are valid. One possible reason for discarding such an entry could be to free buffer space for other routing entries.
2 ICMP Group ICMP Group Implementation of the ICMP group is mandatory for all systems.
icmpInMsgs 1.3.6.1.2.1.5.1 2 icmpInMsgs 1.3.6.1.2.1.5.1 The total number of ICMP messages that the entity received. This counter includes all ICMP messages counted by icmpInErrors.
2 icmpInErrors 1.3.6.1.2.1.5.2 icmpInErrors 1.3.6.1.2.1.5.2 The number of ICMP messages that the entity received but determined to have ICMP-specific errors (bad ICMP checksums, bad length, and so on).
icmpInDestUnreachs 1.3.6.1.2.1.5.3 2 icmpInDestUnreachs 1.3.6.1.2.1.5.3 The number of ICMP Destination Unreachable messages received.
2 icmpInTimeExcds 1.3.6.1.2.1.5.4 icmpInTimeExcds 1.3.6.1.2.1.5.4 The number of ICMP Time Exceeded messages received.
icmpInParmProbs 1.3.6.1.2.1.5.5 2 icmpInParmProbs 1.3.6.1.2.1.5.5 The number of ICMP Parameter Problem messages received.
2 icmpInSrcQuenchs 1.3.6.1.2.1.5.6 icmpInSrcQuenchs 1.3.6.1.2.1.5.6 The number of ICMP Source Quench messages received.
icmpInRedirects 1.3.6.1.2.1.5.7 2 icmpInRedirects 1.3.6.1.2.1.5.7 The number of ICMP Redirect messages received.
2 icmpInEchos 1.3.6.1.2.1.5.8 icmpInEchos 1.3.6.1.2.1.5.8 The number of ICMP Echo (request) messages received.
icmpInEchoReps 1.3.6.1.2.1.5.9 2 icmpInEchoReps 1.3.6.1.2.1.5.9 The number of ICMP Echo Reply messages received.
2 icmpInTimestamps 1.3.6.1.2.1.5.10 icmpInTimestamps 1.3.6.1.2.1.5.10 The number of ICMP Timestamp (request) messages received.
icmpInTimestampReps 1.3.6.1.2.1.5.11 2 icmpInTimestampReps 1.3.6.1.2.1.5.11 The number of ICMP Timestamp Reply messages received.
2 icmpInAddrMasks 1.3.6.1.2.1.5.12 icmpInAddrMasks 1.3.6.1.2.1.5.12 The number of ICMP Address Mask Request messages received.
icmpInAddrMaskReps 1.3.6.1.2.1.5.13 2 icmpInAddrMaskReps 1.3.6.1.2.1.5.13 The number of ICMP Address Mask Reply messages received.
2 icmpOutMsgs 1.3.6.1.2.1.5.14 icmpOutMsgs 1.3.6.1.2.1.5.14 The total number of ICMP messages that this entity attempted to send. NOTE This counter includes all those counted by icmpOutErrors.
icmpOutErrors 1.3.6.1.2.1.5.15 2 icmpOutErrors 1.3.6.1.2.1.5.15 The number of ICMP messages that this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there might be no types of error that contribute to this counter's value.
2 icmpOutDestUnreachs 1.3.6.1.2.1.5.16 icmpOutDestUnreachs 1.3.6.1.2.1.5.16 The number of ICMP Destination Unreachable messages sent.
icmpOutTimeExcds 1.3.6.1.2.1.5.17 2 icmpOutTimeExcds 1.3.6.1.2.1.5.17 The number of ICMP Time Exceeded messages sent.
2 icmpOutParmProbs 1.3.6.1.2.1.5.18 icmpOutParmProbs 1.3.6.1.2.1.5.18 The number of ICMP Parameter Problem messages sent.
icmpOutSrcQuenchs 1.3.6.1.2.1.5.19 2 icmpOutSrcQuenchs 1.3.6.1.2.1.5.19 The number of ICMP Source Quench messages sent.
2 icmpOutRedirects 1.3.6.1.2.1.5.20 icmpOutRedirects 1.3.6.1.2.1.5.20 The number of ICMP Redirect messages sent. For a host, this object is always 0, since hosts do not send redirects.
icmpOutEchos 1.3.6.1.2.1.5.21 2 icmpOutEchos 1.3.6.1.2.1.5.21 The number of ICMP Echo (request) messages sent.
2 icmpOutEchoReps 1.3.6.1.2.1.5.22 icmpOutEchoReps 1.3.6.1.2.1.5.22 The number of ICMP Echo Reply messages sent.
icmpOutTimestamps 1.3.6.1.2.1.5.23 2 icmpOutTimestamps 1.3.6.1.2.1.5.23 The number of ICMP Timestamp (request) messages sent.
2 icmpOutTimestampReps 1.3.6.1.2.1.5.24 icmpOutTimestampReps 1.3.6.1.2.1.5.24 The number of ICMP Timestamp Reply messages sent.
icmpOutAddrMasks 1.3.6.1.2.1.5.25 2 icmpOutAddrMasks 1.3.6.1.2.1.5.25 The number of ICMP Address Mask Request messages sent.
2 icmpOutAddrMaskReps 1.3.6.1.2.1.5.26 icmpOutAddrMaskReps 1.3.6.1.2.1.5.26 The number of ICMP Address Mask Reply messages sent.
TCP Group 2 TCP Group Implementation of the TCP group is mandatory for all systems that implement the TCP. Instances of object types that represent information about a particular TCP connection are transient; they persist only as long as the connection in question.
2 tcpRtoAlgorithm 1.3.6.1.2.1.6.1 tcpRtoAlgorithm 1.3.6.1.2.1.6.1 The algorithm used to determine the time-out value used for retransmitting unacknowledged octets.
tcpRtoMin 1.3.6.1.2.1.6.2 2 tcpRtoMin 1.3.6.1.2.1.6.2 The minimum value permitted by a TCP implementation for the retransmission time-out, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission time-out. In particular, when the time-out algorithm is 3 (rsre), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
2 tcpRtoMax 1.3.6.1.2.1.6.3 tcpRtoMax 1.3.6.1.2.1.6.3 The maximum value permitted by a TCP implementation for the retransmission time-out, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission time-out. In particular, when the time-out algorithm is 3 (rsre), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
tcpMaxConn 1.3.6.1.2.1.6.4 2 tcpMaxConn 1.3.6.1.2.1.6.4 The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
2 tcpActiveOpens 1.3.6.1.2.1.6.5 tcpActiveOpens 1.3.6.1.2.1.6.5 The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
tcpPassiveOpens 1.3.6.1.2.1.6.6 2 tcpPassiveOpens 1.3.6.1.2.1.6.6 The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
2 tcpAttemptFails 1.3.6.1.2.1.6.7 tcpAttemptFails 1.3.6.1.2.1.6.7 The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
tcpEstabResets 1.3.6.1.2.1.6.8 2 tcpEstabResets 1.3.6.1.2.1.6.8 The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
2 tcpCurrEstab 1.3.6.1.2.1.6.9 tcpCurrEstab 1.3.6.1.2.1.6.9 The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT.
tcpInSegs 1.3.6.1.2.1.6.10 2 tcpInSegs 1.3.6.1.2.1.6.10 The total number of segments received, including those received in error. This count includes segments received on currently established connections.
2 tcpOutSegs 1.3.6.1.2.1.6.11 tcpOutSegs 1.3.6.1.2.1.6.11 The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
tcpRetransSegs 1.3.6.1.2.1.6.12 2 tcpRetransSegs 1.3.6.1.2.1.6.12 The total number of segments retransmitted; that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
2 TCP Connection Table TCP Connection Table The TCP connection table contains information about this entity's existing TCP connections.
tcpConnTable 1.3.6.1.2.1.6.13 2 tcpConnTable 1.3.6.1.2.1.6.13 A table containing TCP connection-specific information.
2 tcpConnEntry 1.3.6.1.2.1.6.13.1 tcpConnEntry 1.3.6.1.2.1.6.13.1 Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
tcpConnState 1.3.6.1.2.1.6.13.1.1 2 tcpConnState 1.3.6.1.2.1.6.13.1.1 The state of this TCP connection. The only value that might be set by a management station is deleteTCB (12). Accordingly, it is appropriate for an agent to return a badValue response if a management station attempts to set this object to any other value.
2 tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2 tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2 The local IP address for this TCP connection. In the case of a connection in the listen state that is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
tcpConnLocalPort 1.3.6.1.2.1.6.13.1.3 2 tcpConnLocalPort 1.3.6.1.2.1.6.13.1.3 The local port number for this TCP connection.
2 tcpConnRemAddress 1.3.6.1.2.1.6.13.1.4 tcpConnRemAddress 1.3.6.1.2.1.6.13.1.4 The remote IP address for this TCP connection.
tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 2 tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 The remote port number for this TCP connection.
2 tcpInErrs 1.3.6.1.2.1.6.14 tcpInErrs 1.3.6.1.2.1.6.14 The total number of segments received in error (for example, bad TCP checksums).
tcpOutRsts 1.3.6.1.2.1.6.15 2 tcpOutRsts 1.3.6.1.2.1.6.15 The number of TCP segments sent containing the RST flag.
2 UDP Group UDP Group Implementation of the UDP group is mandatory for all systems that implement the UDP.
udpInDatagrams 1.3.6.1.2.1.7.1 2 udpInDatagrams 1.3.6.1.2.1.7.1 The total number of UDP datagrams delivered to UDP users.
2 udpNoPorts 1.3.6.1.2.1.7.2 udpNoPorts 1.3.6.1.2.1.7.2 The total number of received UDP datagrams for which there was no application at the destination port.
udpInErrors 1.3.6.1.2.1.7.3 2 udpInErrors 1.3.6.1.2.1.7.3 The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
2 udpOutDatagrams 1.3.6.1.2.1.7.4 udpOutDatagrams 1.3.6.1.2.1.7.4 The total number of UDP datagrams sent from this entity.
udpTable 1.3.6.1.2.1.7.5 2 udpTable 1.3.6.1.2.1.7.5 The UDP listener table contains information about this entity’s UDP end-points on which a local application is currently accepting datagrams.
2 udpEntry 1.3.6.1.2.1.7.5.1 udpEntry 1.3.6.1.2.1.7.5.1 Information about a particular current UDP listener.
udpLocalAddress 1.3.6.1.2.1.7.5.1.1 2 udpLocalAddress 1.3.6.1.2.1.7.5.1.1 The local IP address for this UDP listener. In the case of a UDP listener that is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
2 udpLocalPort 1.3.6.1.2.1.7.5.1.2 udpLocalPort 1.3.6.1.2.1.7.5.1.2 The local port number for this UDP listener. EGP Group Brocade does not support the EGP Group. This section is not applicable. Refer to the RFC1213 for complete information regarding the EGP Group. Transmission Group Brocade does not support the Transmission Group. This section is not applicable. Refer to the RFC1213 for complete information regarding the Transmission Group.
snmpInPkts 1.3.6.1.2.1.11.1 2 snmpInPkts 1.3.6.1.2.1.11.1 The total number of messages delivered to the SNMP entity from the transport service.
2 snmpOutPkts 1.3.6.1.2.1.11.2 snmpOutPkts 1.3.6.1.2.1.11.2 The total number of SNMP messages that were passed from the SNMP protocol entity to the transport service.
snmpInBadVersions 1.3.6.1.2.1.11.3 2 snmpInBadVersions 1.3.6.1.2.1.11.3 The total number of SNMP messages that were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
2 snmpInBadCommunityNames 1.3.6.1.2.1.11.4 snmpInBadCommunityNames 1.3.6.1.2.1.11.4 The total number of SNMP messages delivered to the SNMP protocol entity that used a SNMP community name not known to said entity.
snmpInBadCommunityUses 1.3.6.1.2.1.11.5 2 snmpInBadCommunityUses 1.3.6.1.2.1.11.5 The total number of SNMP messages delivered to the SNMP protocol entity that represented an SNMP operation that was not allowed by the SNMP community named in the message.
2 snmpInASNParseErrs 1.3.6.1.2.1.11.6 snmpInASNParseErrs 1.3.6.1.2.1.11.6 The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP messages. NOTE 1.3.6.1.2.1.11.7 is not supported.
snmpInTooBigs 1.3.6.1.2.1.11.8 2 snmpInTooBigs 1.3.6.1.2.1.11.8 The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “tooBig.
2 snmpInNoSuchNames 1.3.6.1.2.1.11.9 snmpInNoSuchNames 1.3.6.1.2.1.11.9 The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “noSuchName.
snmpInBadValues 1.3.6.1.2.1.11.10 2 snmpInBadValues 1.3.6.1.2.1.11.10 The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “badValue.
2 snmpInReadOnlys 1.3.6.1.2.1.11.11 snmpInReadOnlys 1.3.6.1.2.1.11.11 The total number valid SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “readOnly.” It is a protocol error to generate an SNMP PDU that contains the value “readOnly” in the error-status field; as such, this object is provided as a means of detecting incorrect implementations of the SNMP.
snmpInGenErrs 1.3.6.1.2.1.11.12 2 snmpInGenErrs 1.3.6.1.2.1.11.12 The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “genErr.
2 snmpInTotalReqVars 1.3.6.1.2.1.11.13 snmpInTotalReqVars 1.3.6.1.2.1.11.13 The total number of MIB objects that have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
snmpInTotalSetVars 1.3.6.1.2.1.11.14 2 snmpInTotalSetVars 1.3.6.1.2.1.11.14 The total number of MIB objects that have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
2 snmpInGetRequests 1.3.6.1.2.1.11.15 snmpInGetRequests 1.3.6.1.2.1.11.15 Status Mandatory The total number of SNMP Get-Request PDUs that have been accepted and processed by the SNMP protocol entity.
snmpInGetNexts 1.3.6.1.2.1.11.16 2 snmpInGetNexts 1.3.6.1.2.1.11.16 The total number of SNMP Get-Next PDUs that have been accepted and processed by the SNMP protocol entity.
2 snmpInSetRequests 1.3.6.1.2.1.11.17 snmpInSetRequests 1.3.6.1.2.1.11.17 The total number of SNMP Set-Request PDUs that have been accepted and processed by the SNMP protocol entity.
snmpInGetResponses 1.3.6.1.2.1.11.18 2 snmpInGetResponses 1.3.6.1.2.1.11.18 The total number of SNMP Get-Response PDUs that have been accepted and processed by the SNMP protocol entity.
2 snmpInTraps 1.3.6.1.2.1.11.19 snmpInTraps 1.3.6.1.2.1.11.19 The total number of SNMP Trap PDUs that have been accepted and processed by the SNMP protocol entity.
snmpOutTooBigs 1.3.6.1.2.1.11.20 2 snmpOutTooBigs 1.3.6.1.2.1.11.20 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is too large.
2 snmpOutNoSuchNames 1.3.6.1.2.1.11.21 snmpOutNoSuchNames 1.3.6.1.2.1.11.21 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is “noSuchName.
snmpOutBadValues 1.3.6.1.2.1.11.22 2 snmpOutBadValues 1.3.6.1.2.1.11.22 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is “badValue.” NOTE 1.3.6.1.2.1.11.23 is not supported.
2 snmpOutGenErrs 1.3.6.1.2.1.11.24 snmpOutGenErrs 1.3.6.1.2.1.11.24 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is “genErr.
snmpOutGetRequests 1.3.6.1.2.1.11.25 2 snmpOutGetRequests 1.3.6.1.2.1.11.25 The total number of SNMP Get-Request PDUs that have been generated by the SNMP protocol entity.
2 snmpOutGetNexts 1.3.6.1.2.1.11.26 snmpOutGetNexts 1.3.6.1.2.1.11.26 The total number of SNMP Get-Next PDUs that have been generated by the SNMP protocol entity.
snmpOutSetRequests 1.3.6.1.2.1.11.27 2 snmpOutSetRequests 1.3.6.1.2.1.11.27 The total number of SNMP Set-Request PDUs that have been generated by the SNMP protocol entity.
2 snmpOutGetResponses 1.3.6.1.2.1.11.28 snmpOutGetResponses 1.3.6.1.2.1.11.28 The total number of SNMP Get-Response PDUs that have been generated by the SNMP protocol entity.
snmpOutTraps 1.3.6.1.2.1.11.29 2 snmpOutTraps 1.3.6.1.2.1.11.29 The total number of SNMP Trap PDUs that have been generated by the SNMP protocol entity.
2 snmpEnableAuthenTraps 1.3.6.1.2.1.11.30 snmpEnableAuthenTraps 1.3.6.1.2.1.11.30 Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps might be disabled. Values Possible values are: • enabled (1) • disabled (2) This object is stored in nonvolatile memory so that it remains constant between reinitializations of the switch.
ifXTable 1.3.6.1.2.1.31.1.1 2 ifXTable 1.3.6.1.2.1.31.1.1 A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.
2 ifXentry 1.3.6.1.2.1.31.1.1.1 ifXentry 1.3.6.1.2.1.31.1.1.1 An entry in the ifXtable containing additional management information applicable to a particular interface.
ifName 1.3.6.1.2.1.31.1.1.1.1 2 ifName 1.3.6.1.2.1.31.1.1.1.1 The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the devices console. This might be a text name, such as `le0 or a simple port number, such as `1, depending on the interface naming syntax of the device.
2 ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. Not supported.
ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 2 ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. Not supported.
2 ifOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.4 ifOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.4 The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.
ifOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.5 2 ifOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.5 The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a Broadcast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.
2 ifHCInOctets 1.3.6.1.2.1.31.1.1.1.6 ifHCInOctets 1.3.6.1.2.1.31.1.1.1.6 The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets.
ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 2 ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
2 ifHCInMulticastPkts 1.3.6.1.2.1.31.1.1.1.8 ifHCInMulticastPkts 1.3.6.1.2.1.31.1.1.1.8 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts.
ifHCInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.9 2 ifHCInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.9 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime Not supported.
2 ifHCOutOctets 1.3.6.1.2.1.31.1.1.1.10 ifHCOutOctets 1.3.6.1.2.1.31.1.1.1.10 The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
ifHCOutUcastPkts 1.3.6.1.2.1.31.1.1.1.11 2 ifHCOutUcastPkts 1.3.6.1.2.1.31.1.1.1.11 .The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts.
2 ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12 ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12 The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts.
ifHCOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.13 2 ifHCOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.13 The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts.
2 ifLinkUpDownTrapEnable 1.3.6.1.2.1.31.1.1.1.14 ifLinkUpDownTrapEnable 1.3.6.1.2.1.31.1.1.1.14 Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled (1) for interfaces which do not operate on any other interface (as defined in the ifStackTable), and disabled (2) otherwise.
ifHigfSpeed 1.3.6.1.2.1.31.1.1.1.15 2 ifHigfSpeed 1.3.6.1.2.1.31.1.1.1.15 An estimate of the current operational speed of the interface in millions of bits per second. A unit of 1000 equals 1,000,000 bps. For 1 Gbps, the value is 1000, for 2 Gbps, the value 2000, etc.
2 ifPromiscuousMode 1.3.6.1.2.1.31.1.1.1.16 ifPromiscuousMode 1.3.6.1.2.1.31.1.1.1.16 This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective.
ifConnectorPresent 1.3.6.1.2.1.31.1.1.1.17 2 ifConnectorPresent 1.3.6.1.2.1.31.1.1.1.17 Set to true when media is connected, otherwise false. For virtual FC ports, it is always false.
2 ifAlias 1.3.6.1.2.1.31.1.1.1.18 ifAlias 1.3.6.1.2.1.31.1.1.1.18 This object is an alias name for the interface as specified by a network manager, and provides a non-volatile handle for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string.
ifCounterDiscontinuityTime 1.3.6.1.2.1.31.1.1.1.17 2 ifCounterDiscontinuityTime 1.3.6.1.2.1.31.1.1.1.17 The value of sysUpTime on the most recent occasion at which any one or more of this interfaces counters suffered a discontinuity. The relevant counters are the specific instances associated with this interface of any Counter32 or Counter64 object contained in the iftable or ifXTable.
2 218 ifCounterDiscontinuityTime 1.3.6.1.2.1.31.1.1.1.
Chapter 3 FE MIB Objects This chapter provides descriptions and other information specific to FE MIB object types and includes the following information: • FE MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 • FIBRE-CHANNEL-FE-MIB (MIB-II branch) . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 • FCFABRIC-ELEMENT-MIB (Experimental Branch) . . . . . . . . . . . . . . . . . . . .
3 FIBRE-CHANNEL-FE-MIB (MIB-II branch) NOTE Brocade does not support the settable “Write” function for any of the Fibre Channel FE MIB objects except fcFxPortPhyAdminStatus.
FIBRE-CHANNEL-FE-MIB Organization 3 FIBRE-CHANNEL-FE-MIB Organization Figures 17 through 21 depict the organization and structure of FIBRE-CHANNEL-FE-MIB. - iso - org - dod - internet - mgmt - mib-2 - fcFeMIB - fcFeMIBObjects - fcFeConfig - fcFeStatus - fcFeError - fcFeAccounting - fcFeCapabilities - fcFeMIBConformance - fcFeMIBCompliances - fcFeMIBGroups FIGURE 17 fcFeMIB Hierarchy - fcFeConfig - fcFeFabricName 1.3.6.1.2.1.75.1.1.1 - fcFeElementName 1.3.6.1.2.1.75.1.1.2 - fcFeModuleCapacity 1.3.6.1.2.
3 FIBRE-CHANNEL-FE-MIB Organization FIGURE 18 fcFeConfig Hierarchy - fcFeStatus - fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 - fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 - fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 - fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 - fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 - fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 - fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 - fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 - fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.
FIBRE-CHANNEL-FE-MIB Organization 3 - fcFeAccounting - fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 - fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 - fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 - fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 - fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 - fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 - fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 - fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 - fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7 - fcFxPortC1InConnections 1.
3 Definitions for FIBRE-CHANNEL-FE-MIB Definitions for FIBRE-CHANNEL-FE-MIB Table 7 lists the definitions for fcFeMIB. TABLE 7 FIBRE-CHANNEL-FE-MIB Definitions Type Definition Value Description Display string Octet string of size 0 to 255 Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. Milliseconds Integer from 0 to 2147383647 Represents time unit value in milliseconds.
Definitions for FIBRE-CHANNEL-FE-MIB TABLE 7 3 FIBRE-CHANNEL-FE-MIB Definitions (Continued) Type Definition Value Description Fc0BaudRate Integer according to FC-0 baud rates 1 (other) None of below 2 (one-eighth) 155 Mbaud (12.5 MB/s) 4 (quarter) 266 Mbaud (25.0 MB/s) 8 (half) 532 Mbaud (50.
3 fcFeConfig Group TABLE 7 FIBRE-CHANNEL-FE-MIB Definitions (Continued) Type Definition Value Description FcFeFxPortCapacity Integer from 1 to 384 Maximum number of Fx_Ports within a module. For the Brocade 3250, this value is 8. For the Brocade 4012, this value is 12. For the Brocade 200E and 3850, this value is 16. For the Brocade 3900 and 4100, this value is 32. For the Brocade 4900, this value is 64. For the Brocade 5000, this value is 32 For the Brocade 12000, this value is 128.
fcFeFabricName 1.3.6.1.2.1.75.1.1.1 3 fcFeFabricName 1.3.6.1.2.1.75.1.1.1 The Name_Identifier of the Fabric to which this Fabric Element belongs. Returns Displays the WWN of the primary switch in the fabric.
3 fcFeElementName 1.3.6.1.2.1.75.1.1.2 fcFeElementName 1.3.6.1.2.1.75.1.1.2 The Name_Identifier of the fabric element. Returns 228 Displays the WWN of the switch.
fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 3 fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 The maximum number of modules in the fabric element, regardless of their current state. Value The valid value for all Brocade switches is 1.
3 fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 A table that contains information about the modules, one entry for each module in the fabric element.
fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 3 fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 An entry containing the configuration parameters of a module.
3 fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 Identifies the module within the fabric element for which this entry contains information. This value is never greater than fcFeModuleCapacity. This entry never shows any value as it is shown as non accessible in the browser.
fcFeModuleDescr 1.3.6.1.2.1.75.1.1.4.1.2 3 fcFeModuleDescr 1.3.6.1.2.1.75.1.1.4.1.2 A textual description of the module. This value should include the full name and version identification of the module. It should contain printable ASCII characters. Refer to “sysDescr 1.3.6.1.2.1.1.1” on page 22.
3 fcFeModuleObjectID 1.3.6.1.2.1.75.1.1.4.1.3 fcFeModuleObjectID 1.3.6.1.2.1.75.1.1.4.1.3 The vendor’s authoritative identification of the module. This value might be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straightforward and unambiguous means for determining what kind of module is being managed. For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor “Neufe Inc.” was assigned the subtree 1.3.6.1.4.1.99649 and had assigned the identifier 1.3.6.1.4.
fcFeModuleOperStatus 1.3.6.1.2.1.75.1.1.4.1.4 3 fcFeModuleOperStatus 1.3.6.1.2.1.75.1.1.4.1.4 Indicates the operational status of the module.
3 fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 Contains the value of sysUpTime when the module entered its current operational status. A value of 0 indicates that the operational status of the module has not changed since the agent last restarted.
fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.6 3 fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.6 The number of Fx_Ports that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity, inclusive. However, the numbers are not required to be contiguous.
3 fcFeModuleName 1.3.6.1.2.1.75.1.1.4.1.7 fcFeModuleName 1.3.6.1.2.1.75.1.1.4.1.7 The Name_Identifier of the module. Return 238 Displays the WWN of the switch.
fcFxPortTable 1.3.6.1.2.1.75.1.1.5 3 fcFxPortTable 1.3.6.1.2.1.75.1.1.5 A table that contains configuration and service parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element.
3 fcFxPortEntry 1.3.6.1.2.1.75.1.1.5.1 fcFxPortEntry 1.3.6.1.2.1.75.1.1.5.1 An entry containing the configuration and service parameters of an Fx_Port.
fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1 3 fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized.
3 fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2 fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2 The World Wide Name of this Fx_Port. Each Fx_Port has a unique port World Wide Name within the fabric. Return 242 Displays the WWN of the port.
fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 3 fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 The highest or most recent version of FC-PH that the Fx_Port is configured to support. This value is always 32.
3 fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.4 fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.4 The lowest or earliest version of FC-PH that the Fx_Port is configured to support.
fcFxPortBbCredit 1.3.6.1.2.1.75.1.1.5.1.5 3 fcFxPortBbCredit 1.3.6.1.2.1.75.1.1.5.1.5 The total number of receive buffers available for holding Class 1 connect-request, and Class 2 or 3 frames from the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from the attached Nx_Port (if applicable) to Fx_Port.
3 fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the Fx_Port.
fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 3 fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 The Resource_Allocation_Timeout value configured for the Fx_Port. This is used as the time-out value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents E_D_TOV (Refer to “fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8” on page 248) plus twice the maximum time that a frame might be delayed within the fabric and still be delivered.
3 fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8 fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8 The E_D_TOV value configured for the Fx_Port. The Error_Detect_Timeout value is used as the time-out value for detecting an error condition.
fcFxPortCosSupported 1.3.6.1.2.1.75.1.1.5.1.9 3 fcFxPortCosSupported 1.3.6.1.2.1.75.1.1.5.1.9 A value indicating the set of Classes of Service supported by the Fx_Port.
3 fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10 fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10 A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection.
fcFxPortStackedConnMode 1.3.6.1.2.1.75.1.1.5.1.11 3 fcFxPortStackedConnMode 1.3.6.1.2.1.75.1.1.5.1.11 A value indicating the mode of Stacked Connect supported by the Fx_Port.
3 fcFxPortClass2SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.12 fcFxPortClass2SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.12 A flag indicating whether Class 2 Sequential Delivery is supported by the Fx_Port.
fcFxPortClass3SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.13 3 fcFxPortClass3SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.13 A flag indicating whether Class 3 Sequential Delivery is supported by the Fx_Port.
3 fcFxPortHoldTime 1.3.6.1.2.1.75.1.1.5.1.14 fcFxPortHoldTime 1.3.6.1.2.1.75.1.1.5.1.14 The maximum time (in microseconds) that the Fx_Port holds a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the Fx_Port does not support this parameter. fcFeStatus Group This group consists of tables that contain operational status and established service parameters for the fabric element and the attached Nx_Ports.
fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 3 fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 A table that contains operational status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element.
3 fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 An entry containing operational status and parameters of an Fx_Port.
fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 3 fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 The address identifier by which this Fx_Port is identified within the fabric. The Fx_Port might assign its address identifier to its attached Nx_Port(s) during fabric login.
3 fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit.
fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 3 fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 The current operational mode of the Fx_Port.
3 fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 The desired operational mode of the Fx_Port.
Fx_Port Physical Level Table 3 Fx_Port Physical Level Table This table contains the physical level status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element.
3 fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 A table that contains the physical level status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element.
fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 3 fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 An entry containing physical level status and parameters of an Fx_Port.
3 fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 The desired state of the Fx_Port. A management station might place the Fx_Port in a desired state by setting this object accordingly. Values Possible values are: 1: online(1) 2: offline(2) 3: testing(3) The testing state (3) indicates that no operational frames can be passed. When a fabric element initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state (2).
fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.2 3 fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.2 The current operational status of the Fx_Port. Values Possible values are: 1: online(1) 2: offline(2) 3: testing(3) 4: linkFailure(4) The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2).
3 fcFxPortPhysLastChange 1.3.6.1.2.1.75.1.2.2.1.3 fcFxPortPhysLastChange 1.3.6.1.2.1.75.1.2.2.1.3 The value of sysUpTime at the time the Fx_Port entered its current operational status. A value of 0 indicates that the Fx_Port operational status has not changed since the agent last restarted.
fcFxPortPhysRttov 1.3.6.1.2.1.75.1.2.2.1.4 3 fcFxPortPhysRttov 1.3.6.1.2.1.75.1.2.2.1.4 The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by the receiver logic to detect loss of synchronization. This value is displayed in milliseconds. NOTE This object is read-only. It is listed incorrectly in the MIB definition as read-write.
3 Fx_Port Fabric Login Table Fx_Port Fabric Login Table This table contains one entry for each Fx_Port in the fabric element and the service parameters that have been established from the most recent fabric login, whether implicit or explicit.
fcFxloginTable 1.3.6.1.2.1.75.1.2.3 3 fcFxloginTable 1.3.6.1.2.1.75.1.2.3 A table that contains services parameters established from the most recent fabric login, explicit or implicit, one entry for each Fx_Port in the fabric element.
3 fcFxloginEntry 1.3.6.1.2.1.75.1.2.3.1 fcFxloginEntry 1.3.6.1.2.1.75.1.2.3.1 An entry containing service parameters established from a successful fabric login.
fcFxPortNxLoginIndex 1.3.6.1.2.1.75.1.2.3.1.1 3 fcFxPortNxLoginIndex 1.3.6.1.2.1.75.1.2.3.1.1 The associated Nx_Port in the attachment for which the entry contains information.
3 fcFxPortFcphVersionAgreed 1.3.6.1.2.1.75.1.2.3.1.2 fcFxPortFcphVersionAgreed 1.3.6.1.2.1.75.1.2.3.1.2 The version of FC-PH that the Fx_Port has agreed to support from the fabric login.
fcFxPortNxPortBbCredit 1.3.6.1.2.1.75.1.2.3.1.3 3 fcFxPortNxPortBbCredit 1.3.6.1.2.1.75.1.2.3.1.3 The total number of buffers available for holding Class 1 connect-request, and Class 2 or Class 3 frames to be transmitted to the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from Fx_Port to Nx_Port. The buffer-to-buffer flow control mechanism is indicated in the respective fcFxPortBbCreditModel.
3 fcFxPortNxPortRxDataFieldSize 1.3.6.1.2.1.75.1.2.3.1.4 fcFxPortNxPortRxDataFieldSize 1.3.6.1.2.1.75.1.2.3.1.4 The Receive Data Field Size of the attached Nx_Port. This is a binary value that specifies the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port. The value is a number of bytes in the range 128 to 2112, inclusive.
fcFxPortCosSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.5 3 fcFxPortCosSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.5 Indicates that the attached Nx_Port has requested the Fx_Port for the support of classes of services and the Fx_Port has granted the request.
3 fcFxPortIntermixSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.6 fcFxPortIntermixSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.6 A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix support, and the Fx_Port has granted the request. This flag is only valid if Class 1 service is supported.
fcFxPortStackedConnModeAgreed 1.3.6.1.2.1.75.1.2.3.1.7 3 fcFxPortStackedConnModeAgreed 1.3.6.1.2.1.75.1.2.3.1.7 Indicates whether the Fx_Port has agreed to support stacked connect from the fabric login. This is only meaningful if Class 1 service has been agreed to.
3 fcFxPortClass2SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.8 fcFxPortClass2SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.8 Indicates whether the Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. This is only meaningful if Class 2 service has been agreed to. Values Possible values are: • yes (1) The Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. • no (2) The Fx_Port has not agreed to support Class 2 sequential delivery from the fabric login.
fcFxPortClass3SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.9 3 fcFxPortClass3SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.9 A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Values Possible values are: • yes (1) The Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. • no (2) The Fx_Port has not agreed to support Class 3 sequential delivery from the fabric login.
3 fcFxPortNxPortName 1.3.6.1.2.1.75.1.2.3.1.10 fcFxPortNxPortName 1.3.6.1.2.1.75.1.2.3.1.10 The port name of the attached Nx_Port, if applicable. If the value of this object is ‘0000000000000000’H, this Fx_Port has no Nx_Port attached to it. If the Fx_Port has no attached Nx_Port then the instance of the port is not displayed.
fcFxPortConnectedNxPort 1.3.6.1.2.1.75.1.2.3.1.11 3 fcFxPortConnectedNxPort 1.3.6.1.2.1.75.1.2.3.1.11 The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is ‘000000’H, this Fx_Port is not engaged in a connection. If the Fx_Port has no attached Nx_Port then the instance of the port is not displayed.
3 fcFxPortBbCreditModel 1.3.6.1.2.1.75.1.2.3.1.12 fcFxPortBbCreditModel 1.3.6.1.2.1.75.1.2.3.1.12 Identifies the BB_Credit model used by the Fx_Port. The regular model refers to the buffer-to-buffer flow control mechanism defined in FC-PH [1] used between the F_Port and the N_Port. For FL_Ports, the alternate buffer-to-buffer flow control mechanism as defined in FC-AL [4] is used between the FL_Port and any attached NL_Ports.
fcFxPortErrorTable 1.3.6.1.2.1.75.1.3.1 3 fcFxPortErrorTable 1.3.6.1.2.1.75.1.3.1 A table that contains counters that record the numbers of errors detected, one entry for each Fx_Port. This table contains counters recording numbers of errors detected since the management agent reinitialized, one entry for each Fx_Port in the fabric element. The first six columnar objects after the port index correspond to the counters in the link error status block.
3 fcFxPortErrorEntry 1.3.6.1.2.1.75.1.3.1.1 fcFxPortErrorEntry 1.3.6.1.2.1.75.1.3.1.1 An entry containing error counters of a Fx_Port.
fcFxPortLinkFailures 1.3.6.1.2.1.75.1.3.1.1.1 3 fcFxPortLinkFailures 1.3.6.1.2.1.75.1.3.1.1.1 The number of link failures detected by this Fx_Port.
3 fcFxPortSyncLosses 1.3.6.1.2.1.75.1.3.1.1.2 fcFxPortSyncLosses 1.3.6.1.2.1.75.1.3.1.1.2 The number of loss of synchronization errors detected by the Fx_Port.
fcFxPortSigLosses 1.3.6.1.2.1.75.1.3.1.1.3 3 fcFxPortSigLosses 1.3.6.1.2.1.75.1.3.1.1.3 The number of loss of signal errors detected by the Fx_Port.
3 fcFxPortPrimSeqProtoErrors 1.3.6.1.2.1.75.1.3.1.1.4 fcFxPortPrimSeqProtoErrors 1.3.6.1.2.1.75.1.3.1.1.4 The number of primitive sequence protocol errors detected by the Fx_Port.
fcFxPortInvalidTxWords 1.3.6.1.2.1.75.1.3.1.1.5 3 fcFxPortInvalidTxWords 1.3.6.1.2.1.75.1.3.1.1.5 The number of invalid transmission word errors detected by the Fx_Port.
3 fcFxPortInvalidCrcs 1.3.6.1.2.1.75.1.3.1.1.6 fcFxPortInvalidCrcs 1.3.6.1.2.1.75.1.3.1.1.6 The number of invalid cyclic redundancy checks (CRC) detected by this Fx_Port.
fcFxPortDelimiterErrors 1.3.6.1.2.1.75.1.3.1.1.7 3 fcFxPortDelimiterErrors 1.3.6.1.2.1.75.1.3.1.1.7 The number of delimiter errors detected by this Fx_Port.
3 fcFxPortAddressIdErrors 1.3.6.1.2.1.75.1.3.1.1.8 fcFxPortAddressIdErrors 1.3.6.1.2.1.75.1.3.1.1.8 The number of address identifier errors detected by this Fx_Port.
fcFxPortLinkResetIns 1.3.6.1.2.1.75.1.3.1.1.9 3 fcFxPortLinkResetIns 1.3.6.1.2.1.75.1.3.1.1.9 The number of Link Reset Protocol errors received by this Fx_Port from the attached Nx_Port.
3 fcFxPortLinkResetOuts 1.3.6.1.2.1.75.1.3.1.1.10 fcFxPortLinkResetOuts 1.3.6.1.2.1.75.1.3.1.1.10 The number of Link Reset Protocol errors issued by this Fx_Port to the attached Nx_Port.
fcFxPortOlsIns 1.3.6.1.2.1.75.1.3.1.1.11 3 fcFxPortOlsIns 1.3.6.1.2.1.75.1.3.1.1.11 The number of Offline Sequence errors received by this Fx_Port.
3 fcFxPortOlsOuts 1.3.6.1.2.1.75.1.3.1.1.12 fcFxPortOlsOuts 1.3.6.1.2.1.75.1.3.1.1.12 The number of Offline Sequence issued by this Fx_Port. feFcAccounting Group The Accounting group is supported only in Fabric OS v4.x. The Accounting group consists of the following tables: • Class 1 accounting table • Class 2 accounting table • Class 3 accounting table Each table contains accounting information for the Fx_Ports in the fabric element.
fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 3 fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 A table that contains Class 1 accounting information recorded since the management agent reinitialized, one entry for each Fx_Port in the fabric element.
3 fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 An entry containing Class 1 accounting information for each Fx_Port.
fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 3 fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 The number of Class 1 frames (other than Class 1 connect-request) received by this Fx_Port from its attached Nx_Port.
3 fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 The number of Class 1 frames (other than Class 1 connect-request) delivered through this Fx_Port to its attached Nx_Port.
fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 3 fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 The number of Class 1 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port.
3 fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 The number of Class 1 frame octets, including the frame delimiters, delivered through this Fx_Port its attached Nx_Port.
fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 3 fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 The number of Class 1 frames discarded by this Fx_Port.
3 fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 The number of F_BSY frames generated by this Fx_Port against Class 1 connect-request.
fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7 3 fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7 The number of F_RJT frames generated by this Fx_Port against Class 1 connect-request.
3 fcFxPortC1InConnections 1.3.6.1.2.1.75.1.4.1.1.8 fcFxPortC1InConnections 1.3.6.1.2.1.75.1.4.1.1.8 The number of Class 1 connections successfully established in which the attached Nx_Port is the source of the connect-request.
fcFxPortC1OutConnections 1.3.6.1.2.1.75.1.4.1.1.9 3 fcFxPortC1OutConnections 1.3.6.1.2.1.75.1.4.1.1.9 The number of Class 1 connections successfully established in which the attached Nx_Port is the destination of the connect-request.
3 fcFxPortC1ConnTime 1.3.6.1.2.1.75.1.4.1.1.10 fcFxPortC1ConnTime 1.3.6.1.2.1.75.1.4.1.1.10 The cumulative time that this Fx_Port has been engaged in Class 1 connection. The amount of time is counted from after a connect-request has been accepted until the connection is disengaged, either by an EOFdt or Link Reset.
fcFxPortC2AccountingTable 1.3.6.1.2.1.75.1.4.2 3 fcFxPortC2AccountingTable 1.3.6.1.2.1.75.1.4.2 A table that contains Class 2 accounting information recorded since the management agent has reinitialized, one entry for each Fx_Port in the fabric element.
3 fcFxPortC2AccountingEntry 1.3.6.1.2.1.75.1.4.2.1 fcFxPortC2AccountingEntry 1.3.6.1.2.1.75.1.4.2.1 An entry containing Class 2 accounting information for each Fx_Port.
fcFxPortC2InFrames 1.3.6.1.2.1.75.1.4.2.1.1 3 fcFxPortC2InFrames 1.3.6.1.2.1.75.1.4.2.1.1 The number of Class 2 frames received by this Fx_Port from its attached Nx_Port.
3 fcFxPortC2OutFrames 1.3.6.1.2.1.75.1.4.2.1.2 fcFxPortC2OutFrames 1.3.6.1.2.1.75.1.4.2.1.2 The number of Class 2 frames delivered through this Fx_Port to its attached Nx_Port.
fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3 3 fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3 The number of Class 2 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port.
3 fcFxPortC2OutOctets 1.3.6.1.2.1.75.1.4.2.1.4 fcFxPortC2OutOctets 1.3.6.1.2.1.75.1.4.2.1.4 The number of Class 2 frame octets, including the frame delimiters, delivered through this Fx_Port to its attached Nx_Port.
fcFxPortC2Discards 1.3.6.1.2.1.75.1.4.2.1.5 3 fcFxPortC2Discards 1.3.6.1.2.1.75.1.4.2.1.5 The number of Class 2 frames discarded by this Fx_Port.
3 fcFxPortC2FbsyFrames 1.3.6.1.2.1.75.1.4.2.1.6 fcFxPortC2FbsyFrames 1.3.6.1.2.1.75.1.4.2.1.6 The number of F_BSY frames generated by this Fx_Port against Class 2 frames.
fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7 3 fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7 The number of F_RJT frames generated by this Fx_Port against Class 2 frames.
3 fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.3 fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.3 A table that contains Class 3 accounting information recorded since the management agent has reinitialized, one entry for each Fx_Port in the fabric element.
fcFxPortC3AccountingEntry 1.3.6.1.2.1.75.1.4.3.1 3 fcFxPortC3AccountingEntry 1.3.6.1.2.1.75.1.4.3.1 An entry containing Class 3 accounting information for each Fx_Port.
3 fcFxPortC3InFrames 1.3.6.1.2.1.75.1.4.3.1.1 fcFxPortC3InFrames 1.3.6.1.2.1.75.1.4.3.1.1 The number of Class 3 frames received by this Fx_Port from its attached Nx_Port.
fcFxPortC3OutFrames 1.3.6.1.2.1.75.1.4.3.1.2 3 fcFxPortC3OutFrames 1.3.6.1.2.1.75.1.4.3.1.2 The number of Class 3 frames delivered through this Fx_Port to its attached Nx_Port.
3 fcFxPortC3InOctets 1.3.6.1.2.1.75.1.4.3.1.3 fcFxPortC3InOctets 1.3.6.1.2.1.75.1.4.3.1.3 The number of Class 3 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port.
fcFxPortC3OutOctets 1.3.6.1.2.1.75.1.4.3.1.4 3 fcFxPortC3OutOctets 1.3.6.1.2.1.75.1.4.3.1.4 The number of Class 3 frame octets, including the frame delimiters, delivered through this Fx_Port to its attached Nx_Port.
3 fcFxPortC3Discards 1.3.6.1.2.1.75.1.4.3.1.5 fcFxPortC3Discards 1.3.6.1.2.1.75.1.4.3.1.5 The number of Class 3 frames discarded by this Fx_Port. fcFeCapability Group This group consists of a table describing information about what each Fx_Port is inherently capable of operating or supporting. A capability might be used, as expressed in its respective object value in the Configuration group. Implementation of this group is optional.
fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 3 fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 A table that contains the capabilities of the port within the fabric element, one entry for each Fx_Port.
3 fcFxPortCapEntry 1.3.6.1.2.1.75.1.5.1.1 fcFxPortCapEntry 1.3.6.1.2.1.75.1.5.1.1 An entry containing the capabilities of a Fx_Port.
fcFxPortCapFcphVersionHigh 1.3.6.1.2.1.75.1.5.1.1.1 3 fcFxPortCapFcphVersionHigh 1.3.6.1.2.1.75.1.5.1.1.1 The highest or most recent version of FC-PH that the Fx_Port is capable of supporting.
3 fcFxPortCapFcphVersionLow 1.3.6.1.2.1.75.1.5.1.1.2 fcFxPortCapFcphVersionLow 1.3.6.1.2.1.75.1.5.1.1.2 The lowest or earliest version of FC-PH that the Fx_Port is capable of supporting.
fcFxPortCapBbCreditMax 1.3.6.1.2.1.75.1.5.1.1.3 3 fcFxPortCapBbCreditMax 1.3.6.1.2.1.75.1.5.1.1.3 The maximum number of receive buffers available for holding Class 1 connect-request, and Class 2 or Class 3 frames from the attached Nx_Port.
3 fcFxPortCapBbCreditMin 1.3.6.1.2.1.75.1.5.1.1.4 fcFxPortCapBbCreditMin 1.3.6.1.2.1.75.1.5.1.1.4 The minimum number of receive buffers available for holding Class 1 connect-request, and Class 2 or Class 3 frames from the attached Nx_Port.
fcFxPortCapRxDataFieldSizeMax 1.3.6.1.2.1.75.1.5.1.1.5 3 fcFxPortCapRxDataFieldSizeMax 1.3.6.1.2.1.75.1.5.1.1.5 The maximum size (in bytes) of the data field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port.
3 fcFxPortCapRxDataFieldSizeMin 1.3.6.1.2.1.75.1.5.1.1.6 fcFxPortCapRxDataFieldSizeMin 1.3.6.1.2.1.75.1.5.1.1.6 The minimum size (in bytes) of the data field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port.
fcFxPortCapCos 1.3.6.1.2.1.75.1.5.1.1.7 3 fcFxPortCapCos 1.3.6.1.2.1.75.1.5.1.1.7 A value indicating the set of Classes of Service that the Fx_Port is capable of supporting.
3 fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8 fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8 A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service.
fcFxPortCapStackedConnMode 1.3.6.1.2.1.75.1.5.1.1.9 3 fcFxPortCapStackedConnMode 1.3.6.1.2.1.75.1.5.1.1.9 A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting.
3 fcFxPortCapClass2SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.10 fcFxPortCapClass2SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.10 A flag indicating whether the Fx_Port is capable of supporting Class 2 Sequential Delivery.
fcFxPortCapClass3SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.11 3 fcFxPortCapClass3SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.11 A flag indicating whether the Fx_Port is capable of supporting Class 3 Sequential Delivery.
3 fcFxPortCapHoldTimeMax 1.3.6.1.2.1.75.1.5.1.1.12 fcFxPortCapHoldTimeMax 1.3.6.1.2.1.75.1.5.1.1.12 The maximum holding time (in microseconds) that the Fx_Port is capable of supporting.
fcFxPortCapHoldTimeMin 1.3.6.1.2.1.75.1.5.1.1.13 3 fcFxPortCapHoldTimeMin 1.3.6.1.2.1.75.1.5.1.1.13 The minimum holding time (in microseconds) that the Fx_Port is capable of supporting.
3 FCFABRIC-ELEMENT-MIB (Experimental Branch) FCFABRIC-ELEMENT-MIB (Experimental Branch) NOTE The FCFABRIC-ELEMENT-MIB is supported only in Fabric OS v2.6.x and v3.0.x. This section contains descriptions and other information that is specific to FCFABRIC-ELEMENT-MIB (in the experimental branch), including the following: • FCFABRIC-ELEMENT-MIB Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Definitions for FCFABRIC-ELEMENT-MIB . . . . . . . . . . . . . . . . . . . . . . . . . . .
FCFABRIC-ELEMENT-MIB Organization 3 FCFABRIC-ELEMENT-MIB Organization Figures 23 through 28 depict the organization and structure of FCFABRIC-ELEMENT-MIB.
3 FCFABRIC-ELEMENT-MIB Organization - fcFeConfig - fcFabricName 1.3.6.1.3.42.2.1.1.1 - fcElementName 1.3.6.1.3.42.2.1.1.2 - fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 - fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 - fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 - fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 - fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 - fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 - fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 - fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 - fcFeModuleFxPortCapacity 1.3.6.1.3.
FCFABRIC-ELEMENT-MIB Organization 3 - fcFeOp - fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 - fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 - fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 - fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 - fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 - fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 - fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 - fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 - fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 - fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.
3 FCFABRIC-ELEMENT-MIB Organization FIGURE 26 fcFeError Hierarchy - fcFeAcct (-- Not Supported --) FIGURE 27 fcFeAcct Hierarchy - fcFeCap - fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 - fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 - fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 - fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 - fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.3 - fcFxPortCapFcphVersionLow 1.3.6.1.3.42.2.1.5.1.1.4 - fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.5 - fcFxPortCapBbCreditMin 1.
Definitions for FCFABRIC-ELEMENT-MIB 3 Definitions for FCFABRIC-ELEMENT-MIB The following definitions are used for FCFABRIC-ELEMENT-MIB. TABLE 8 FCFABRIC-ELEMENT-MIB Definitions Type Definition Value Description Display string Octet string of size 0 to 255 Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. Milliseconds Integer from 0 to 2147383647 Represents time unit value in milliseconds.
3 Definitions for FCFABRIC-ELEMENT-MIB TABLE 8 FCFABRIC-ELEMENT-MIB Definitions (Continued) Type Definition Value Description Fc0BaudRate Integer according to FC-0 baud rates 1 (other) None of below 2 (one-eighth) 155 Mbaud (12.5 MB/s) 4 (quarter) 266 Mbaud (25.0 MB/s) 8 (half) 532 Mbaud (50.
fcFeConfig Group TABLE 8 3 FCFABRIC-ELEMENT-MIB Definitions (Continued) Type Definition Value Description FcFeNxPortIndex Integer from 1 to 256 Represents the NxPort index within a conceptual table. FcFxPortMode Integer 1 (unknown) 2 (fPort) 3 (flPort) FcBbCreditModel Integer 1 (regular) 2 (alternate) fcFeConfig Group This group consists of scalar objects and tables. It contains the configuration and service parameters of the fabric element and the Fx_Ports.
3 fcFabricName 1.3.6.1.3.42.2.1.1.1 fcFabricName 1.3.6.1.3.42.2.1.1.1 The Name_Identifier of the fabric to which this fabric element belongs. Return 348 Returns the WWN of the primary switch in the fabric.
fcElementName 1.3.6.1.3.42.2.1.1.2 3 fcElementName 1.3.6.1.3.42.2.1.1.2 The Name_Identifier of the fabric element. Return Returns the WWN of the switch.
3 fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 The maximum number of modules in the fabric element, regardless of their current state. The Brocade 12000, 24000, and 48000 directors do not support this MIB variable. The Value for fcFeModuleCapacity is always 1 for all the supported switches.
fc Fabric Element Module Table 3 fc Fabric Element Module Table This table contains one entry for each module, information of the modules.
3 fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 A table that contains, one entry for each module in the fabric element, information of the modules.
fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 3 fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 An entry containing the configuration parameters of a module.
3 fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 Identifies the module within the fabric element for which this entry contains information. This value is never greater than fcFeModuleCapacity.
fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 3 fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 A textual description of the module. This value should include the full name and version identification of the module. It should contain printable ASCII characters. Refer to “sysDescr 1.3.6.1.2.1.1.1” on page 22.
3 fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 The vendor’s authoritative identification of the module. This value might be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of module is being managed. For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor “Neufe Inc.” was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the identifier 1.3.6.1.
fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 3 fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 Indicates the operational status of the module: • • • • Fabric OS MIB Reference 53-1001156-01 online (1) The module is functioning properly. offline (2) The module is not available. testing (3) The module is under testing. faulty (4) The module is defective in some way.
3 fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 Contains the value of “sysUpTime 1.3.6.1.2.1.1.3” when the module entered its current operational status. A value of 0 indicates that the operational status of the module has not changed since the agent last restarted.
fcFeModuleFxPortCapacity 1.3.6.1.3.42.2.1.1.4.1.6 3 fcFeModuleFxPortCapacity 1.3.6.1.3.42.2.1.1.4.1.6 The number of Fx_Port that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity, inclusive; however, the numbers are not required to be contiguous.
3 fcFeModuleName 1.3.6.1.3.42.2.1.1.4.1.7 fcFeModuleName 1.3.6.1.3.42.2.1.1.4.1.7 The Name_Identifier of the module. The return value is the WWN of the switch.
Fx_Port Configuration Table 3 Fx_Port Configuration Table This table contains, one entry for each Fx_Port, the configuration parameters of the ports.
3 fcFxConfTable 1.3.6.1.3.42.2.1.1.5 fcFxConfTable 1.3.6.1.3.42.2.1.1.5 A table that contains, one entry for each Fx_Port in the fabric element, configuration and service parameters of the Fx_Ports.
fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 3 fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 An entry containing the configuration and service parameters of an Fx_Port.
3 fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1 fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1 Identifies the module containing the Fx_Port for which this entry contains information.
fcFxConfFxPortIndex 1.3.6.1.3.42.2.1.1.5.1.2 3 fcFxConfFxPortIndex 1.3.6.1.3.42.2.1.1.5.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized.
3 fcFxPortName 1.3.6.1.3.42.2.1.1.5.1.3 fcFxPortName 1.3.6.1.3.42.2.1.1.5.1.3 The name identifier of this Fx_Port. Each Fx_Port has a unique port name within the address space of the fabric. The return value is the WWN of the port.
fcFxPortFcphVersionHigh 1.3.6.1.3.42.2.1.1.5.1.4 3 fcFxPortFcphVersionHigh 1.3.6.1.3.42.2.1.1.5.1.4 The highest or most recent version of FC-PH that the Fx_Port is configured to support.
3 fcFxPortFcphVersionLow 1.3.6.1.3.42.2.1.1.5.1.5 fcFxPortFcphVersionLow 1.3.6.1.3.42.2.1.1.5.1.5 The lowest or earliest version of FC-PH that the Fx_Port is configured to support.
fcFxPortBbCredit 1.3.6.1.3.42.2.1.1.5.1.6 3 fcFxPortBbCredit 1.3.6.1.3.42.2.1.1.5.1.6 The total number of receive buffers available for holding Class 1 connect-request Class 2 or 3 frames from the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from the attached Nx_Port (if applicable) to Fx_Port.
3 fcFxPortRxBufSize 1.3.6.1.3.42.2.1.1.5.1.7 fcFxPortRxBufSize 1.3.6.1.3.42.2.1.1.5.1.7 The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the Fx_Port.
fcFxPortRatov 1.3.6.1.3.42.2.1.1.5.1.8 3 fcFxPortRatov 1.3.6.1.3.42.2.1.1.5.1.8 The Resource_Allocation_Timeout Value configured for the Fx_Port. This is used as the time-out value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents E_D_TOV (Refer to “fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8” on page 248) plus twice the maximum time that a frame might be delayed within the fabric and still be delivered.
3 fcFxPortEdtov 1.3.6.1.3.42.2.1.1.5.1.9 fcFxPortEdtov 1.3.6.1.3.42.2.1.1.5.1.9 The E_D_TOV value configured for the Fx_Port. The Error_Detect_Timeout Value is used as the time-out value for detecting an error condition.
fcFxPortCosSupported 1.3.6.1.3.42.2.1.1.5.1.10 3 fcFxPortCosSupported 1.3.6.1.3.42.2.1.1.5.1.10 A value indicating the set of Classes of Service supported by the Fx_Port.
3 fcFxPortIntermixSupported 1.3.6.1.3.42.2.1.1.5.1.11 fcFxPortIntermixSupported 1.3.6.1.3.42.2.1.1.5.1.11 A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection.
fcFxPortStackedConnMode 1.3.6.1.3.42.2.1.1.5.1.12 3 fcFxPortStackedConnMode 1.3.6.1.3.42.2.1.1.5.1.12 A value indicating the mode of stacked connect supported by the Fx_Port.
3 fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13 fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13 A flag indicating whether Class 2 sequential delivery is supported by the Fx_Port.
fcFxPortClass3SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.14 3 fcFxPortClass3SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.14 A flag indicating whether Class 3 sequential delivery is supported by the Fx_Port.
3 fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.15 fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.15 The maximum time (in microseconds) that the Fx_Port holds a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the Fx_Port does not support this parameter.
fcFxPortBaudRate 1.3.6.1.3.42.2.1.1.5.1.16 3 fcFxPortBaudRate 1.3.6.1.3.42.2.1.1.5.1.16 The FC-0 baud rate of the Fx_Port. The Brocade 12000, 24000, 48000 , and DCX directors do not support this MIB variable.
3 fcFxPortMedium 1.3.6.1.3.42.2.1.1.5.1.17 fcFxPortMedium 1.3.6.1.3.42.2.1.1.5.1.17 The FC-0 medium of the Fx_Port.
fcFxPortTxType 1.3.6.1.3.42.2.1.1.5.1.18 3 fcFxPortTxType 1.3.6.1.3.42.2.1.1.5.1.18 The FC-0 transmitter type of the Fx_Port.
3 fcFxPortDistance 1.3.6.1.3.42.2.1.1.5.1.19 fcFxPortDistance 1.3.6.1.3.42.2.1.1.5.1.19 The FC-0 distance range of the Fx_Port transmitter. fcFeOp Group This group consists of tables that contain operational status and established service parameters for the fabric element and the attached Nx_Ports. NOTE Implementation of this group is mandatory.
fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 3 fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 A table that contains one entry for each Fx_Port in the fabric element, operational status, and parameters of the Fx_Ports.
3 fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 An entry containing operational status and parameters of an Fx_Port.
fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 3 fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 Identifies the module containing the Fx_Port for which this entry contains information.
3 fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized.
fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 3 fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 The address identifier by which this Fx_Port is identified within the fabric. The Fx_Port might assign its address identifier to its attached Nx_Port(s) during fabric login.
3 fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 The port name of the attached N_Port, if applicable. If the value of this object is ‘0000000000000000’H, this Fx_Port has no Nx_Port attached to it. This variable has been deprecated and might be implemented for backward compatibility.
fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 3 fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is ‘000000’H, this Fx_Port is not engaged in a connection. This variable has been deprecated and might be implemented for backward compatibility.
3 fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit.
fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 3 fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 The current operational mode of the Fx_Port.
3 fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.8 fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.8 The desired operational mode of the Fx_Port.
fcFxPortPhysTable 1.3.6.1.3.42.2.1.2.3 3 fcFxPortPhysTable 1.3.6.1.3.42.2.1.2.3 A table that contains, one entry for each Fx_Port in the fabric element, physical level status and parameters of the Fx_Ports.
3 fcFxPortPhysEntry 1.3.6.1.3.42.2.1.2.3.1 fcFxPortPhysEntry 1.3.6.1.3.42.2.1.2.3.1 An entry containing physical level status and parameters of an Fx_Port.
fcFxPortPhysModuleIndex 1.3.6.1.3.42.2.1.2.3.1.1 3 fcFxPortPhysModuleIndex 1.3.6.1.3.42.2.1.2.3.1.1 Identifies the module containing the Fx_Port for which this entry contains information.
3 fcFxPortPhysFxPortIndex 1.3.6.1.3.42.2.1.2.3.1.2 fcFxPortPhysFxPortIndex 1.3.6.1.3.42.2.1.2.3.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized.
fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3 3 fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3 The desired state of the Fx_Port: • online (1) Place port online • offline (2) Take port offline • testing (3) Initiate test procedures A management station might place the Fx_Port in a desired state by setting this object accordingly. The testing state (3) indicates that no operational frames can be passed.
3 fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4 fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4 The current operational status of the Fx_Port: • • • • online (1) Log in might proceed. offline (2) Log in cannot proceed. testing (3) Port is under test. link-failure (4) Failure after online/testing. The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2).
fcFxPortPhysLastChange 1.3.6.1.3.42.2.1.2.3.1.5 3 fcFxPortPhysLastChange 1.3.6.1.3.42.2.1.2.3.1.5 The value of sysUpTime at the time the Fx_Port entered its current operational status. A value of 0 indicates that the Fx_Port’s operational status has not changed since the agent last restarted.
3 fcFxPortPhysRttov 1.3.6.1.3.42.2.1.2.3.1.6 fcFxPortPhysRttov 1.3.6.1.3.42.2.1.2.3.1.6 The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by the receiver logic to detect Loss of Synchronization.
Fx_Port Fabric Login Table 3 Fx_Port Fabric Login Table This table contains one entry for each Fx_Port in the fabric element, and the Service Parameters that have been established from the most recent fabric login, whether implicit or explicit.
3 fcFxlogiTable 1.3.6.1.3.42.2.1.2.4 fcFxlogiTable 1.3.6.1.3.42.2.1.2.4 A table that contains, one entry for each Fx_Port in the fabric element, services parameters established from the most recent fabric login, explicit or implicit.
fcFxlogiEntry 1.3.6.1.3.42.2.1.2.4.1 3 fcFxlogiEntry 1.3.6.1.3.42.2.1.2.4.1 An entry containing service parameters established from a successful fabric login.
3 fcFxlogiModuleIndex 1.3.6.1.3.42.2.1.2.4.1.1 fcFxlogiModuleIndex 1.3.6.1.3.42.2.1.2.4.1.1 Identifies the module containing the Fx_Port for which this entry contains information.
fcFxlogiFxPortIndex 1.3.6.1.3.42.2.1.2.4.1.2 3 fcFxlogiFxPortIndex 1.3.6.1.3.42.2.1.2.4.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized.
3 fcFxlogiNxPortIndex 1.3.6.1.3.42.2.1.2.4.1.3 fcFxlogiNxPortIndex 1.3.6.1.3.42.2.1.2.4.1.3 The object identifies the associated Nx_Port in the attachment for which the entry contains information.
fcFxPortFcphVersionAgreed 1.3.6.1.3.42.2.1.2.4.1.4 3 fcFxPortFcphVersionAgreed 1.3.6.1.3.42.2.1.2.4.1.4 The version of FC-PH that the Fx_Port has agreed to support from the fabric login.
3 fcFxPortNxPortBbCredit 1.3.6.1.3.42.2.1.2.4.1.5 fcFxPortNxPortBbCredit 1.3.6.1.3.42.2.1.2.4.1.5 The total number of buffers available for holding Class 1 connect-request Class 2 or Class 3 frames to be transmitted to the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from Fx_Port to Nx_Port. The buffer-to-buffer flow control mechanism is indicated in the respective fcFxPortBbCreditModel.
fcFxPortNxPortRxDataFieldSize 1.3.6.1.3.42.2.1.2.4.1.6 3 fcFxPortNxPortRxDataFieldSize 1.3.6.1.3.42.2.1.2.4.1.6 The Receive Data Field Size of the attached Nx_Port. This is a binary value that specifies the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port. The value is a number of bytes in the range 128 to 2112, inclusive.
3 fcFxPortCosSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.7 fcFxPortCosSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.7 Indicates that the attached Nx_Port has requested the Fx_Port for the support of classes of services and the Fx_Port has granted the request.
fcFxPortIntermixSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.8 3 fcFxPortIntermixSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.8 A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix support and the Fx_Port has granted the request. This flag is only valid if Class 1 service is supported.
3 fcFxPortStackedConnModeAgreed 1.3.6.1.3.42.2.1.2.4.1.9 fcFxPortStackedConnModeAgreed 1.3.6.1.3.42.2.1.2.4.1.9 Indicates whether the Fx_Port has agreed to support stacked connect from the fabric login. This is only meaningful if Class 1 service has been agreed to.
fcFxPortClass2SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.10 3 fcFxPortClass2SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.10 A variable indicating whether the Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. This is only meaningful if Class 2 service has been agreed.
3 fcFxPortClass3SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.11 fcFxPortClass3SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.11 A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to.
fcFxPortNxPortName 1.3.6.1.3.42.2.1.2.4.1.12 3 fcFxPortNxPortName 1.3.6.1.3.42.2.1.2.4.1.12 The port name of the attached Nx_Port, if applicable. If the value of this object is ‘0000000000000000’H, this Fx_Port has no Nx_Port attached to it.
3 fcFxPortConnectedNxPort 1.3.6.1.3.42.2.1.2.4.1.13 fcFxPortConnectedNxPort 1.3.6.1.3.42.2.1.2.4.1.13 The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is ‘000000’H, this Fx_Port is not engaged in a connection.
fcFxPortBbCreditModel 1.3.6.1.3.42.2.1.2.4.1.14 3 fcFxPortBbCreditModel 1.3.6.1.3.42.2.1.2.4.1.14 Identifies the BB_Credit model used by the Fx_Port. The regular model refers to the buffer-to-buffer flow control mechanism defined in FC-PH [1] used between the F_Port and the N_Port. For FL_Ports, the alternate buffer-to-buffer flow control mechanism as defined in FC-AL [4] is used between the FL_Port and any attached NL_Ports.
3 fcFxPortErrorTable 1.3.6.1.3.42.2.1.3.1 fcFxPortErrorTable 1.3.6.1.3.42.2.1.3.1 This table contains one entry for each Fx_Port in the fabric element, and counters recording numbers of errors detected since the management agent reinitialized. The first six columnar objects after the port index correspond to the counters in the Link ErrorStatus Block.
fcFxPortErrorEntry 1.3.6.1.3.42.2.1.3.1.1 3 fcFxPortErrorEntry 1.3.6.1.3.42.2.1.3.1.1 An entry containing error counters of an Fx_Port.
3 fcFxPortErrorModuleIndex 1.3.6.1.3.42.2.1.3.1.1.1 fcFxPortErrorModuleIndex 1.3.6.1.3.42.2.1.3.1.1.1 Identifies the module containing the Fx_Port for which this entry contains information.
fcFxPortErrorFxPortIndex 1.3.6.1.3.42.2.1.3.1.1.2 3 fcFxPortErrorFxPortIndex 1.3.6.1.3.42.2.1.3.1.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized.
3 fcFxPortLinkFailures 1.3.6.1.3.42.2.1.3.1.1.3 fcFxPortLinkFailures 1.3.6.1.3.42.2.1.3.1.1.3 The number of link failures detected by this Fx_Port.
fcFxPortSyncLosses 1.3.6.1.3.42.2.1.3.1.1.4 3 fcFxPortSyncLosses 1.3.6.1.3.42.2.1.3.1.1.4 The number of loss of synchronization errors detected by the Fx_Port.
3 fcFxPortSigLosses 1.3.6.1.3.42.2.1.3.1.1.5 fcFxPortSigLosses 1.3.6.1.3.42.2.1.3.1.1.5 The number of loss of signal errors detected by the Fx_Port.
fcFxPortPrimSeqProtoErrors 1.3.6.1.3.42.2.1.3.1.1.6 3 fcFxPortPrimSeqProtoErrors 1.3.6.1.3.42.2.1.3.1.1.6 The number of primitive sequence protocol errors detected by the Fx_Port.
3 fcFxPortInvalidTxWords 1.3.6.1.3.42.2.1.3.1.1.7 fcFxPortInvalidTxWords 1.3.6.1.3.42.2.1.3.1.1.7 The number of invalid transmission word errors detected by the Fx_Port.
fcFxPortInvalidCrcs 1.3.6.1.3.42.2.1.3.1.1.8 3 fcFxPortInvalidCrcs 1.3.6.1.3.42.2.1.3.1.1.8 The number of invalid Cyclic Redundancy Checks (CRCs) detected by this Fx_Port.
3 fcFxPortDelimiterErrors 1.3.6.1.3.42.2.1.3.1.1.9 fcFxPortDelimiterErrors 1.3.6.1.3.42.2.1.3.1.1.9 The number of Delimiter errors detected by this Fx_Port.
fcFxPortAddressIdErrors 1.3.6.1.3.42.2.1.3.1.1.10 3 fcFxPortAddressIdErrors 1.3.6.1.3.42.2.1.3.1.1.10 The number of address identifier errors detected by this Fx_Port.
3 fcFxPortLinkResetIns 1.3.6.1.3.42.2.1.3.1.1.11 fcFxPortLinkResetIns 1.3.6.1.3.42.2.1.3.1.1.11 The number of Link Reset Protocol errors received by this Fx_Port from the attached Nx_Port.
fcFxPortLinkResetOuts 1.3.6.1.3.42.2.1.3.1.1.12 3 fcFxPortLinkResetOuts 1.3.6.1.3.42.2.1.3.1.1.12 The number of Link Reset Protocol errors issued by this Fx_Port to the attached Nx_Port.
3 fcFxPortOlsIns 1.3.6.1.3.42.2.1.3.1.1.13 fcFxPortOlsIns 1.3.6.1.3.42.2.1.3.1.1.13 The number of Offline Sequence errors received by this Fx_Port.
fcFxPortOlsOuts 1.3.6.1.3.42.2.1.3.1.1.14 3 fcFxPortOlsOuts 1.3.6.1.3.42.2.1.3.1.1.14 The number of Offline Sequence errors issued by this Fx_Port. fcFeAcct Group Brocade supports fcFxPortC2AccountingTable and fcFxPortC3AccountingTable. fcFeCap Group This group consists of a table describing information about what each Fx_Port is inherently capable of operating or supporting. A capability might be used or not, as expressed in its respective object value in the Configuration group.
3 fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 A table that contains one entry for each Fx_Port, and the capabilities of the port within the fabric element.
fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 3 fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 An entry containing the capabilities of a Fx_Port.
3 fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 Identifies the module containing the Fx_Port for which this entry contains information.
fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 3 fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized.
3 fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.3 fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.3 The highest or most recent version of FC-PH that the Fx_Port is capable of supporting.
fcFxPortCapFcphVersionLow 1.3.6.1.3.42.2.1.5.1.1.4 3 fcFxPortCapFcphVersionLow 1.3.6.1.3.42.2.1.5.1.1.4 The lowest or earliest version of FC-PH that the Fx_Port is capable of supporting.
3 fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.5 fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.5 The maximum number of receive buffers available for holding Class 1 connect-request Class 2 or Class 3 frames from the attached Nx_Port.
fcFxPortCapBbCreditMin 1.3.6.1.3.42.2.1.5.1.1.6 3 fcFxPortCapBbCreditMin 1.3.6.1.3.42.2.1.5.1.1.6 The minimum number of receive buffers available for holding Class 1 connect-request Class 2 or Class 3 frames from the attached Nx_Port.
3 fcFxPortCapRxDataFieldSizeMax 1.3.6.1.3.42.2.1.5.1.1.7 fcFxPortCapRxDataFieldSizeMax 1.3.6.1.3.42.2.1.5.1.1.7 The maximum size (in bytes) of the Data Field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port.
fcFxPortCapRxDataFieldSizeMin 1.3.6.1.3.42.2.1.5.1.1.8 3 fcFxPortCapRxDataFieldSizeMin 1.3.6.1.3.42.2.1.5.1.1.8 The minimum size (in bytes) of the Data Field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port.
3 fcFxPortCapCos 1.3.6.1.3.42.2.1.5.1.1.9 fcFxPortCapCos 1.3.6.1.3.42.2.1.5.1.1.9 A value indicating the set of Classes of Service that the Fx_Port is capable of supporting.
fcFxPortCapIntermix 1.3.6.1.3.42.2.1.5.1.1.10 3 fcFxPortCapIntermix 1.3.6.1.3.42.2.1.5.1.1.10 A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service.
3 fcFxPortCapStackedConnMode 1.3.6.1.3.42.2.1.5.1.1.11 fcFxPortCapStackedConnMode 1.3.6.1.3.42.2.1.5.1.1.11 A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting.
fcFxPortCapClass2SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.12 3 fcFxPortCapClass2SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.12 A flag indicating whether the Fx_Port is capable of supporting Class 2 Sequential Delivery.
3 fcFxPortCapClass3SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.13 fcFxPortCapClass3SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.13 A flag indicating whether the Fx_Port is capable of supporting Class 3 Sequential Delivery.
fcFxPortCapHoldTimeMax 1.3.6.1.3.42.2.1.5.1.1.14 3 fcFxPortCapHoldTimeMax 1.3.6.1.3.42.2.1.5.1.1.14 The maximum holding time (in microseconds) that the Fx_Port is capable of supporting.
3 fcFxPortCapHoldTimeMin 1.3.6.1.3.42.2.1.5.1.1.15 fcFxPortCapHoldTimeMin 1.3.6.1.3.42.2.1.5.1.1.15 The minimum holding time (in microseconds) that the Fx_Port is capable of supporting.
fcFxPortCapBaudRates 1.3.6.1.3.42.2.1.5.1.1.16 3 fcFxPortCapBaudRates 1.3.6.1.3.42.2.1.5.1.1.16 A value indicating the set of baud rates that the Fx_Port is capable of supporting. This variable has been deprecated and might be implemented for backward compatibility.
3 fcFxPortCapMedia 1.3.6.1.3.42.2.1.5.1.1.17 fcFxPortCapMedia 1.3.6.1.3.42.2.1.5.1.1.17 A value indicating the set of media that the Fx_Port is capable of supporting. This variable has been deprecated and might be implemented for backward compatibility.
Chapter 4 Entity MIB Objects This chapter provides descriptions and other information specific to Entity MIB object types and includes the following information: • Entity MIB Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Textual Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Entity MIB Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Entity MIB Overview Entity MIB System Organization of MIB Objects Figure 29 through Figure 36 depict the organization and structure of the Entity MIB file system. - iso - org - dod - internet - mgmt - mib-2 - entityMIB - entityMIBObjects - entityPhysical - entityLogical - entityMapping - entityGeneral - entityMIBTraps - entityMIBTrapPrefix - entityConformance - entityCompliances - entityGroups FIGURE 29 Overall Tree Structure for Entity MIB - entityPhysical - entPhysicalTable 1.3.6.1.2.1.47.1.1.
Entity MIB Overview 4 - entityMapping - entLPMappingTable 1.3.6.1.2.1.47.1.3.1 - entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 - entLPPhysicalIndex 1.3.6.1.2.1.47.1.3.1.1.1 - entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 - entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 - entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 - entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 - entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 - entPhysicalContainsEntry 1.3.6.1.2.1.47.1.3.3.1 - entPhysicalChildIndex 1.3.6.1.2.1.47.1.3.3.1.
4 Entity MIB Overview TABLE 9 Objects Imported into the Entity MIB (Continued) Object Imported from this module TDomain SNMPv2-TC TAddress TEXTUAL-CONVENTION AutonomousType RowPointer TimeStamp TruthValue MODULE-COMPLIANCE SNMPv2-CONF OBJECT-GROUP NOTIFICATION-GROUP SnmpAdminString 456 SNMP-FRAMEWORK-MIB Fabric OS MIB Reference 53-1001156-01
Textual Conventions 4 Textual Conventions PhysicalIndex Arbitrary value that uniquely identifies the physical entity. Value should be a small positive integer; index values for different physical entities are not necessarily contiguous. Syntax Integer (1...
4 PhysicalClass PhysicalClass An enumerated value that provides an indication of the general hardware type of a particular physical entity. There are no restrictions as to the number of entPhysicalEntries of each entPhysicalClass, which must be instantiated by an agent. Syntax Integer TABLE 10 458 Possible Values for PhysicalClass Values Description other (1) The physical entity class is known but does not match any of the supported values.
SnmpEngineIdOrNone 4 SnmpEngineIdOrNone A specially formatted SnmpEngineID string for use with the Entity MIB. If an instance of an object with syntax SnmpEngineIdOrNone has a non-zero length, then the object encoding and semantics are defined by the SnmpEngineID textual convention (Refer to RFC 2571 [RFC2571]). If an instance of an object with syntax SnmpEngineIdOrNone contains a zero-length string, then no appropriate SnmpEngineID is associated with the logical entity (that is, SNMPv3 not supported).
4 Physical Entity Group Physical Entity Group entPhysicalTable 1.3.6.1.2.1.47.1.1.1 This table contains one row per physical entity ( Figure 36). The table always contains at least one row for an “overall” physical entity. This object is implemented for Fabric OS v6.2.0. The “overall” physical entry for Brocade is the chassis, and in Fabric OS v6.2.0 it is marked as a FRU.
entPhysicalTable 1.3.6.1.2.1.47.1.1.1 TABLE 11 4 entPhysicalTable Entries for Brocade Switches Platform Blades Fans Power Supply WWN Card Brocade 5100 1 blade 2 fans 2 PS 1 WWN unit. Not a FRU. Brocade 5300 1 blade 3 fans 2 PS 1 WWN unit. Not a FRU.
4 entPhysicalEntry 1.3.6.1.2.1.47.1.1.1.1 entPhysicalEntry 1.3.6.1.2.1.47.1.1.1.1 Information about a particular physical entity. Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS identify and characterize the entry, and objects (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table.
entPhysicalIndex 1.3.6.1.2.1.47.1.1.1.1.1 4 entPhysicalIndex 1.3.6.1.2.1.47.1.1.1.1.1 The index for this entry. This object is not accessible.
4 entPhysicalDescr 1.3.6.1.2.1.47.1.1.1.1.2 entPhysicalDescr 1.3.6.1.2.1.47.1.1.1.1.2 A textual description of the physical entity (physical name of the entity, such as chassis, blade, port, and so on). This object should contain a string that identifies the entity manufacturer’s name and should be set to a distinct value for each version or model of the physical entity. The name provides the entity type and number (for example, slot 1, power supply, and so on).
entPhysicalVendorType 1.3.6.1.2.1.47.1.1.1.1.3 4 entPhysicalVendorType 1.3.6.1.2.1.47.1.1.1.1.3 An indication of the vendor-specific hardware type of the physical entity. Note that this is different from the definition of MIB-II sysObjectID. An agent should set this object to an enterprise-specific registration identifier value, indicating the specific equipment type in detail. The associated instance of entPhysicalClass indicates the general type of hardware device.
4 entPhysicalContainedIn 1.3.6.1.2.1.47.1.1.1.1.4 entPhysicalContainedIn 1.3.6.1.2.1.47.1.1.1.1.4 The value of entPhysicalIndex for the physical entity that “contains” this physical entity. A value of 0 indicates this physical entity is not contained in any other physical entity. Note that the set of containment relationships define a strict hierarchy; that is, recursion is not allowed.
entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.5 4 entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.5 An indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value that most accurately indicates the general class of the physical entity, or the primary class if there is more than one. If no appropriate standard registration identifier exists for this physical entity, then the value other(1) is returned.
4 entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.5 • Module: One entry for switch blade, up to two entries for power supplies, and up to six entries for fans. Brocade 4100 switches can have the following hierarchy of physical objects: • Chassis: One entry (one row) • Container: One entry for each FRU slot (one switch blade, two power supplies, three fans) • Module: 1 entry for switch blade, up to two entries for power supplies, and up to three entries for fans.
entPhysicalParentRelPos 1.3.6.1.2.1.47.1.1.1.1.6 4 entPhysicalParentRelPos 1.3.6.1.2.1.47.1.1.1.1.6 An indication of the relative position of this child component among all its sibling components. Sibling components are defined as entPhysicalEntries that share the same instance values of each of the entPhysicalContainedIn and entPhysicalClass objects. For chassis entry, this value is -1; for containers, it is the sequential number of the container from the first one; for all FRUs, it is always 1.
4 entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7 entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7 The textual name of the physical entity (physical name of the entity such as chassis, blade, port, and so on). The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the device’s “console.
entPhysicalHardwareRev 1.3.6.1.2.1.47.1.1.1.1.8 4 entPhysicalHardwareRev 1.3.6.1.2.1.47.1.1.1.1.8 The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present). Note that if revision information is stored internally in a nonprintable (for example, binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner.
4 entPhysicalFirmwareRev 1.3.6.1.2.1.47.1.1.1.1.9 entPhysicalFirmwareRev 1.3.6.1.2.1.47.1.1.1.1.9 The vendor-specific firmware revision string for the physical entity. Note that if revision information is stored internally in a nonprintable (for example, binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner.
entPhysicalSoftwareRev 1.3.6.1.2.1.47.1.1.1.1.10 4 entPhysicalSoftwareRev 1.3.6.1.2.1.47.1.1.1.1.10 The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a nonprintable (for example, binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner.
4 entPhysicalSerialNum 1.3.6.1.2.1.47.1.1.1.1.11 entPhysicalSerialNum 1.3.6.1.2.1.47.1.1.1.1.11 The vendor-specific serial number string for the physical entity. The preferred value is the serial number actually printed on the component (if present). On the first instantiation of a physical entity, the value of entPhysicalSerialNum associated with that entity is set to the correct vendor-assigned serial number, if this information is available to the agent.
entPhysicalMfgName 1.3.6.1.2.1.47.1.1.1.1.12 4 entPhysicalMfgName 1.3.6.1.2.1.47.1.1.1.1.12 The name of the manufacturer of this physical component. The preferred value is the name actually printed on the component (if present). Note that comparisons between instances of the entPhysicalModelName, entPhysicalFirmwareRev, entPhysicalSoftwareRev, and the entPhysicalSerialNum objects are meaningful only amongst entPhysicalEntries with the same value of entPhysicalMfgName.
4 entPhysicalModelName 1.3.6.1.2.1.47.1.1.1.1.13 entPhysicalModelName 1.3.6.1.2.1.47.1.1.1.1.13 The vendor-specific model name associated with this physical component. The preferred value is the customer-visible part number, which might be printed on the component. If the model name string associated with the physical component is unknown to the agent, then this object contains a zero-length string. Set to serial number and part number (if available) respectively.
entPhysicalAlias 1.3.6.1.2.1.47.1.1.1.1.14 4 entPhysicalAlias 1.3.6.1.2.1.47.1.1.1.1.14 This object is an alias name for the physical entity as specified by a network manager; it provides a nonvolatile handle for the physical entity. On the first instantiation of a physical entity, the value of entPhysicalAlias associated with that entity is set to the zero-length string. However, the agent might set the value to a locally unique default value instead of a zero-length string.
4 entPhysicalAssetID 1.3.6.1.2.1.47.1.1.1.1.15 entPhysicalAssetID 1.3.6.1.2.1.47.1.1.1.1.15 This object is a user-assigned asset tracking identifier for the physical entity as specified by a network manager; it provides nonvolatile storage of this information. On the first instantiation of a physical entity, the value of entPhysicalAssetID associated with that entity is set to the zero-length string. Not every physical component has an asset tracking identifier or even need one.
entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16 4 entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16 The entPhysicalIsFRU object indicates whether this physical entity is considered a field replaceable unit by the vendor. If this object contains the value “true(1),” then this entPhysicalEntry identifies a field replaceable unit. For all entPhysicalEntries representing components that are permanently contained within a field replaceable unit, the value “false(2)” should be returned for this object.
4 Logical Entity Group Logical Entity Group entLogicalTable 1.3.6.1.2.1.47.1.2.1 This table contains one row per logical entity. For agents that implement more than one naming scope, at least one entry must exist. Agents that instantiate all MIB objects within a single naming scope are not required to implement this table.
entLogicalEntry 1.3.6.1.2.1.47.1.2.1.1 4 entLogicalEntry 1.3.6.1.2.1.47.1.2.1.1 Information about a particular logical entity. Entities might be managed by this agent or other SNMP agents in the same chassis.
4 entLogicalIndex 1.3.6.1.2.1.47.1.2.1.1.1 entLogicalIndex 1.3.6.1.2.1.47.1.2.1.1.1 The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are not necessarily contiguous.
entLogicalDescr 1.3.6.1.2.1.47.1.2.1.1.2 4 entLogicalDescr 1.3.6.1.2.1.47.1.2.1.1.2 A textual description of the logical entity. This object should contain a string that identifies the manufacturer’s name for the logical entity and should be set to a distinct value for each version of the logical entity.
4 entLogicalType 1.3.6.1.2.1.47.1.2.1.1.3 entLogicalType 1.3.6.1.2.1.47.1.2.1.1.3 An indication of the type of logical entity. This is typically the Object Identifier name of the node in the SMI’s naming hierarchy that represents the major MIB module, or the majority of the MIB modules, supported by the logical entity. • a logical entity of a regular host/router -> mib-2 • a logical entity of a 802.1d bridge -> dot1dBridge • a logical entity of a 802.
entLogicalCommunity 1.3.6.1.2.1.47.1.2.1.1.4 4 entLogicalCommunity 1.3.6.1.2.1.47.1.2.1.1.4 An SNMPv1 or SNMPv2C community string, which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and might also return a community string based on the privileges of the request used to read this object.
4 entLogicalTAddress 1.3.6.1.2.1.47.1.2.1.1.5 entLogicalTAddress 1.3.6.1.2.1.47.1.2.1.1.5 The transport service address by which the logical entity receives network management traffic, formatted according to the corresponding value of entLogicalTDomain. For snmpUDPDomain, a TAddress is 6 octets long, the initial 4 octets containing the IP-address in network-byte order and the last 2 containing the UDP port in network-byte order.
entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6 4 entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6 Indicates the kind of transport service by which the logical entity receives network management traffic. Possible values for this object are currently found in the Transport Mappings for SNMPv2 document (RFC1906).
4 entLogicalContextEngineID 1.3.6.1.2.1.47.1.2.1.1.7 entLogicalContextEngineID 1.3.6.1.2.1.47.1.2.1.1.7 The authoritative contextEngineID that can be used to send an SNMP message concerning information held by this logical entity to the address specified by the associated entLogicalTAddress/entLogicalTDomain pair.
entLogicalContextName 1.3.6.1.2.1.47.1.2.1.1.8 4 entLogicalContextName 1.3.6.1.2.1.47.1.2.1.1.8 The contextName that can be used to send an SNMP message concerning information held by this logical entity to the address specified by the associated entLogicalTAddress/entLogicalTDomain pair.
4 Entity Mapping Group Entity Mapping Group entLPMappingTable 1.3.6.1.2.1.47.1.3.1 This table contains zero or more rows of logical entity to physical equipment associations. For each logical entity known by this agent, there are zero or more mappings to the physical resources used to realize that logical entity. An agent should limit the number and nature of entries in this table such that only meaningful and nonredundant information is returned.
entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 4 entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 Information about a particular logical entity to physical equipment association. Note that the nature of the association is not specifically identified in this entry. It is expected that sufficient information exists in the MIBs used to manage a particular logical entity to infer how physical component information is utilized.
4 entLPPhysicalIndex 1.3.6.1.2.1.47.1.3.1.1.1 entLPPhysicalIndex 1.3.6.1.2.1.47.1.3.1.1.1 The value of this object identifies the index value of a particular entPhysicalEntry associated with the indicated entLogicalEntity.
entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 4 entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 This table contains zero or more rows, representing mappings of logical entity and physical component to external MIB identifiers. Each physical port in the system might be associated with a mapping to an external identifier, which itself is associated with a particular logical entity’s naming scope. A wildcard mechanism is provided to indicate that an identifier is associated with more than one logical entity.
4 entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 Information about a particular physical equipment, logical entity to external identifier binding. Each logical entity/physical component pair might be associated with one alias mapping. The logical entity index might also be used as a wildcard (Refer to “entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1” on page 495 for details.
entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 4 entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 The value of this object identifies the logical entity that defines the naming scope for the associated instance of the entAliasMappingIdentifier object. If this object has a nonzero value, then it identifies the logical entity named by the same value of entLogicalIndex.
4 entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 The value of this object identifies a particular conceptual row associated with the indicated entPhysicalIndex and entLogicalIndex pair. Since only physical ports are modeled in this table, only entries that represent interfaces or ports are allowed. If an ifEntry exists on behalf of a particular physical port, then this object should identify the associated ifEntry.
entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 4 entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 A table that exposes the container/containee relationships between physical entities. This table provides all the information found by constructing the virtual containment tree for a given entPhysicalTable, but in a more direct format.
4 entPhysicalContainsEntry 1.3.6.1.2.1.47.1.3.3.1 entPhysicalContainsEntry 1.3.6.1.2.1.47.1.3.3.1 A single container / containee relationship.
entPhysicalChildIndex 1.3.6.1.2.1.47.1.3.3.1.1 4 entPhysicalChildIndex 1.3.6.1.2.1.47.1.3.3.1.1 The value of entPhysicalIndex for the contained physical entity.
4 General Group General Group entLastChangeTime 1.3.6.1.2.1.47.1.4.
Entity MIB Trap 4 Entity MIB Trap This section lists the entityMIBTrap objects. entConfigChange 1.3.6.1.2.1.47.2.0.1 An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent should not generate more than one entConfigChange notification event in a given time interval (five seconds is the suggested default).
4 Entity MIB Conformance Information Entity MIB Conformance Information This section lists the entityConformance MIBs. Figure 35 on page 455 shows the structure of the entityConformance group. entityCompliance 1.3.6.1.2.1.47.3.1.1 The compliance statement for SNMP entities that implement version 1 of the Entity MIB.
entity2Compliance 1.3.6.1.2.1.47.3.1.2 4 entity2Compliance 1.3.6.1.2.1.47.3.1.2 The compliance statement for SNMP entities that implement version 2 of the Entity MIB. Mandatory Groups 1: entityPhysicalGroup 2: entityPhysical2Group 3: entityGeneralGroup 4: entityNotificationsGroup Components 1. Type: Group Group: entityLogical2Group Description: Implementation of this group is not mandatory for agents which model all MIB object instances within a single naming scope. 2.
4 entityPhysicalGroup 1.3.6.1.2.1.47.3.2.1 entityPhysicalGroup 1.3.6.1.2.1.47.3.2.1 The collection of objects used to represent physical system components, for which a single agent provides management information.
entityLogicalGroup 1.3.6.1.2.1.47.3.2.2 4 entityLogicalGroup 1.3.6.1.2.1.47.3.2.2 The collection of objects used to represent the list of logical entities, for which a single agent provides management information.
4 entityMappingGroup 1.3.6.1.2.1.47.3.2.3 entityMappingGroup 1.3.6.1.2.1.47.3.2.3 The collection of objects used to represent the associations between multiple logical entities, physical components, interfaces, and port identifiers, for which a single agent provides management information.
entityGeneralGroup 1.3.6.1.2.1.47.3.2.4 4 entityGeneralGroup 1.3.6.1.2.1.47.3.2.4 The collection of objects that are used to represent general entity information for which a single agent provides management information.
4 entityNotificationsGroup 1.3.6.1.2.1.47.3.2.5 entityNotificationsGroup 1.3.6.1.2.1.47.3.2.5 The collection of notifications used to indicate Entity MIB data consistency and general status information.
entityPhysical2Group 1.3.6.1.2.1.47.3.2.6 4 entityPhysical2Group 1.3.6.1.2.1.47.3.2.6 The collection of objects used to represent physical system components, for which a single agent provides management information. This group augments the objects contained in the entityPhysicalGroup.
4 entityLogical2Group 1.3.6.1.2.1.47.3.2.7 entityLogical2Group 1.3.6.1.2.1.47.3.2.7 The collection of objects used to represent the list of logical entities, for which a single SNMP entity provides management information.
Chapter 5 SW-MIB Objects This chapter contains descriptions and other information specific to FC Switch MIB (SW-MIB) object types. This chapter provides information on: • SW MIB Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • sw Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • swSystem Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 SW MIB Overview - swAgtCfg - swFCport - swNs - swEvent - swFwSystem - swEndDevice - swGroup - swBlmPerfMnt - swTrunk - sw28k - sw21kN24k - sw20x0 - bsciReg - bsciModules - sw21kN24k - sw20x0 FIGURE 37 SW-MIB Overall Tree Structure - swTrapsV2 - swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 - swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 - swFCPortScn 1.3.6.1.4.1.1588.2.1.1.1.0.3 - swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 - swFabricWatchTrap 1.3.6.1.4.1.1588.2.1.1.1.0.5 - swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.
SW MIB Overview 5 - swSystem - swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 - swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 - swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 - swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 - swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 - swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 - swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 - swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 - swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 - swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.
5 SW MIB Overview - swFabric - swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 - swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 - swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 - swVfId 1.3.6.1.4.1.1588.2.1.1.1.2.9 - swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.10 - swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.10.1 - swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.1 - swNbMyPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.2 - swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.3 - swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.4 - swNbBaudRate 1.3.6.1.4.1.1588.2.
SW MIB Overview 5 - swFCport (1.3.6.1.4.1.1588.2.1.1.1.6) - swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 - swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 - swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 - swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 - swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 - swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 - swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 - swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 - swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.
5 SW MIB Overview - swNs - swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 - swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 - swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 - swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 - swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 - swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 - swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 - swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 - swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 - swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.
SW MIB Overview 5 - swFwSystem - swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 - swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 - swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 - swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 - swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 - swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 - swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 - swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 - swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
5 SW MIB Overview - swEndDevice - swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 - swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 - swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 - swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 - swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 - swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 - swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 - swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 - swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.
SW MIB Overview 5 - swTrunk - swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 - swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 - swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 - swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 - swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 - swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 - swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 - swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 - swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 - swTrunkGrpNumber 1.3.6.1.4.1.
5 SW MIB Overview TABLE 12 SW-MIB Textual Conventions (Continued) Type Definition Value Description SwFwActs Integer Valid action matrix: 0 swFwNoAction 1 swFwErrlog 2 swFwSnmptrap 3 swFwErrlogSnmptrap 4 swFwPortloglock 5 swFwErrlogPortloglock 6 swFwSnmptrapPortloglock 7 swFwErrlogSnmptrapPortloglock 8 swFwRn 9 swFwElRn 10 swFwStRn 11 swFwElStRn 12 swFwPlRn 13 swFwElPlRn 14 swFwStPlRn 15 swFwElStPlRn 16 swFwMailAlert 17 swFwMailAlertErrlog 18 swFwMailAlertSnmptrap 19 swFwMailAlertErrlogSnmptrap 20
SW MIB Overview TABLE 12 5 SW-MIB Textual Conventions (Continued) Type Definition Value Description SwFwClassesAreas Integer Classes and area index: 1 swFwEnvTemp 2 swFwEnvFan 3 swFwEnvPs 4 swFwTransceiverTemp 5 swFwTransceiverRxp 6 swFwTransceiverTxp 7 swFwTransceiverCurrent 8 swFwPortLink 9 swFwPortSync 10 swFwPortSignal 11 swFwPortPe 12 swFwPortWords 13 swFwPortCrcs 14 swFwPortRXPerf 15 swFwPortTXPerf 16 swFwPortState 17 swFwFabricEd 18 swFwFabricFr 19 swFwFabricDi 20 swFwFabricSc 21 swFwFabricZ
5 sw Traps TABLE 12 SW-MIB Textual Conventions (Continued) Type Definition Value Description SwFwEvent Integer Possible events available: 1 started 2 changed 3 exceeded 4 below 5 above 6 inBetween SwFwBehavior Integer Behavior type for thresholds: 1 triggered 2 continuous SwFwState Integer State type for last events: 1 swFwInformative 2 swFwNormal 3 swFwfaulty SwFwLicense Integer License state: 1 swFwLicensed 2 swFwNotLicensed sw Traps This section contains descriptions and other informat
sw Traps 5 Refer to Table 13 for the six traps defined in the SW.MIB, when it occurs, and how to configure the trap, if possible. TABLE 13 SW MIB Traps Name Specific When Configure “swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1” on page 524 (not supported) 1 During boot, if diagnostics fail N.A. “swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2” on page 525 2 Obsolete N.A. “swFCPortScn 1.3.6.1.4.1.1588.2.1.1.1.0.3” on page 526 3 Port changes state Always on “swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.
5 swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 This trap is no longer generated. Enterprise Variables sw “swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” A swFault is generated whenever the diagnostics detect a fault with the switch. #TYPE #SUMMARY #ARGUMENTS #SEVERITY #TIMEINDEX #STATE 524 Switch is faulty.
swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 5 swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 (Obsoleted by swFabricWatchTrap) Enterprise Variables sw “swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3” “swSensorIndex 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1” “swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2” “swSensorValue 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4” “swSensorInfo 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.
5 swFCPortScn 1.3.6.1.4.1.1588.2.1.1.1.0.3 swFCPortScn 1.3.6.1.4.1.1588.2.1.1.1.0.3 Enterprise Variables sw “swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4” “swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1” “swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” “swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38” A swFCPortScn (3) is generated whenever an FC_Port changes its operational state: for instance, the FC_Port goes from online to offline.
swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 5 swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 Enterprise Variables sw “swEventIndex 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1” “swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2” “swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3” “swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4” “swEventDescr 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” This trap is generated when an event occurs with a level that is at or below “swEventTrapLevel 1.3.6.1.4.1.1588.2.
5 swFabricWatchTrap 1.3.6.1.4.1.1588.2.1.1.1.0.5 swFabricWatchTrap 1.3.6.1.4.1.1588.2.1.1.1.0.5 Enterprise Variables sw “swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1” “swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1” “swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3” “swFwLabel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4” “swFwLastEvent 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.6” “swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7” “swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8” “swFwLastState 1.3.6.1.4.1.
swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6 5 swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6 Enterprise Variables sw “swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1.1.23” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” Trap to be sent for tracking log in/log out/configuration changes. #TYPE #SUMMARY #ARGUMENTS #SEVERITY #TIMEINDEX #STATE Track changes has generated a trap.
5 swIPv6ChangeTrap 1.3.6.1.4.1.1588.2.1.1.1.0.7 swIPv6ChangeTrap 1.3.6.1.4.1.1588.2.1.1.1.0.7 Enterprise Variables sw “swIPv6Address 1.3.6.1.4.1.1588.2.1.1.1.1.29” “swIPv6Status 1.3.6.1.4.1.1588.2.1.1.1.1.30” This trap is generated when an IPv6 address status change event occurs.
swPmgrEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.8 5 swPmgrEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.8 Enterprise Variables sw “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” “swVfId 1.3.6.1.4.1.1588.2.1.1.1.2.9” This trap is generated when any partition manager change happens.
5 swSystem Group swSystem Group swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 The current date and time.
swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 5 swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 The date and time when the system last booted.
5 swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 The date and time when the firmware was last loaded to the switch.
swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 5 swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 The date and time when the firmware was last downloaded or the configuration file was last changed.
5 swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 The date and time when the BootPROM was last updated.
swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 5 swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 The current version of the firmware. The return value is displayed using the following format: vM.m.f Where: v M m f = deployment indicator = major version = minor version = software maintenance version For example, v6.1.0_main_bld36 described firmware version 6.1.0 and the specific build number 36. Some versions may not have a build number and will appear as the version. An example might be v6.1.
5 swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 The current operational status of the switch. Values Possible values are: • online (1) The switch is accessible by an external Fibre Channel port. • offline (2) The switch is not accessible. • testing (3) The switch is in a built-in test mode and is not accessible by an external Fibre Channel port. • faulty (4) The switch is not operational.
swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 5 swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 The desired administrative status of the switch. A management station might place the switch in a desired state by setting this object accordingly. Values Possible values are: • • • • • • online (1) Set the switch to be accessible by an external FC port. offline (2) Set the switch to be inaccessible. testing (3) Set the switch to run the built-in test. faulty (4) Set the switch to a “soft” faulty condition.
5 swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 The desired administrative status of the telnet shell. Setting this value to 1 (terminated), deletes the current telnet shell task. When this variable instance is read, it reports the value last set through SNMP. This OID is supported in Fabric OS v2.x through v3.x. This OID is not supported in Fabric OS v4.0 through v4.2. It is supported in Fabric OS version 4.3 and above.
swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10 5 swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10 The soft serial number of the switch. This variable will return the “ssn” value that is stored in the config database. If the “ssn” key value pair is not in the config database it will return WWN of the switch.” Flash Administration The next six objects are related to firmware or configuration file management.
5 swFlashDLOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.11 swFlashDLOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.11 The operational status of the flash. This OID cannot be used for either Firmwaredownload or Configdownload (cannot be set and is readonly) for Fabric OS v4.4 and above. The value displayed is always "swCurrent(1)".
swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 5 swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 The desired state of the flash. The host is specified in swFlashDLHost.0. In addition, the user name is specified in swFlashDLUser.0 and the file name specified in swFlashDLFile.0. This OID is writeable only in Fabric OS v2.6.x and v3.x. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for Fabric OS v4.4 and above.
5 swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13 swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13 The name or IP address (in dot notation) of the host to download or upload a relevant file to the flash. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions.
swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14 5 swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14 The user name is used on the host for downloading or uploading a relevant file, to or from the flash. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions.
5 swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 The name of the file to be downloaded or uploaded. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions.
swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 5 swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 The password to be used for FTP transfer of files in the download or upload operation. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions.
5 swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.18 swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.18 The current operational status of the switch beacon. Values Possible values are: • on (1) The LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. • off (2) Each LED is in its regular status, indicating color and state.
swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 5 swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 The desired status of the switch beacon. Values Possible values are: • on (1) The LEDs on the front panel of the switch run alternately from left to right and right to left. Set the color to yellow. • off (2) Set each LED to its regular status, indicating color and state.
5 swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 The result of the power-on startup test (POST) diagnostics. Values Possible values are: • sw-ok (1) The switch is okay. • sw-faulty (2) The switch has experienced an unknown fault. • sw-embedded-port-fault (3) The switch has experienced an embedded port fault.
swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 5 swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 The number of sensors inside the switch. The Brocade DCX value is between 1 and 57 (temperature =50, fan = 3, power supply = 4). The value might vary depending on the switch model. For Fabric OS v6.1.0, if no sensor is available, this variable is assigned the value -1.
5 swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22 swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22 Table of sensor entries. TABLE 14 552 Sensors on the Various Brocade Switches Platform Temp Fans Power Supply swNumSensors / connUnitNumSensors Brocade 200E 2 sensors 3 fans 1 PS 6 Brocade 3016 4 sensors NA NA 4 Brocade 3200 3 sensors 2 absent 5 fans 1 absent 2 absent 13 Note: Shows absent entries.
swSensorEntry 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 5 swSensorEntry 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 An entry of the sensor information.
5 swSensorIndex 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 swSensorIndex 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 The index of the sensor. The values are 1 through the value in swNumSensors.
swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 5 swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 The type of sensor.
5 swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 The current status of the sensor. Values Possible values are: • • • • • • 1: unknown (1) 2: faulty (2) 3: below-min (3) The sensor value is below the minimal threshold. 4: nominal (4) 5: above-max (5) The sensor value is above the maximum threshold. 6: absent (6) The sensor is missing. For Temperature, valid values include 3 (below-min), 4 (nominal), and 5 (above-max).
swSensorValue 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4 5 swSensorValue 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4 The current value (reading) of the sensor. The value -2147483648 represents the maximum value of integer value; it also means that the sensor does not have the capability to measure the actual value. In v2.0, the temperature sensor value is in Celsius, the fan value is in RPM (revolutions per minute), and the power supply sensor reading is unknown.
5 swSensorInfo 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 swSensorInfo 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 Additional information on the sensor. It contains the sensor type and number, in textual format; for example: SLOT #0: TEMP #3 FAN #1 Power Supply #1 Return values for the Brocade 12000, 24000, and 48000 directors depend upon the configuration of your system.
swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1.1.23 5 swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1.1.23 Track changes string; for trap only. If there are no events to track, the default return value is “No event so far.
5 swID 1.3.6.1.4.1.1588.2.1.1.1.1.24 swID 1.3.6.1.4.1.1588.2.1.1.1.1.24 Not supported in Fabric OS v3.2.0. With VF enabled fabric the number of logical switch will be 0 to 128.
swEtherIPAddress 1.3.6.1.4.1.1588.2.1.1.1.1.25 5 swEtherIPAddress 1.3.6.1.4.1.1588.2.1.1.1.1.25 Not supported in Fabric OS v3.2.0. Supported in Fabric OS v6.2.0 The IP address of the Ethernet interface of this logical switch.
5 swEtherIPMask 1.3.6.1.4.1.1588.2.1.1.1.1.26 swEtherIPMask 1.3.6.1.4.1.1588.2.1.1.1.1.26 Not supported in Fabric OS v3.2.0. The IP mask of the Ethernet interface of this logical switch.
swFCIPAddress 1.3.6.1.4.1.1588.2.1.1.1.1.27 5 swFCIPAddress 1.3.6.1.4.1.1588.2.1.1.1.1.27 Not supported in Fabric OS v3.2.0. The IP address of the FC interface of this logical switch.
5 swFCIPMask 1.3.6.1.4.1.1588.2.1.1.1.1.28 swFCIPMask 1.3.6.1.4.1.1588.2.1.1.1.1.28 Not supported in Fabric OS v3.2.0. The IP mask of the FC interface of this logical switch.
swIPv6Address 1.3.6.1.4.1.1588.2.1.1.1.1.29 5 swIPv6Address 1.3.6.1.4.1.1588.2.1.1.1.1.29 The IPv6 address.
5 swIPv6Status 1.3.6.1.4.1.1588.2.1.1.1.1.30 swIPv6Status 1.3.6.1.4.1.1588.2.1.1.1.1.30 The current status of the IPv6 address.
swModel 1.3.6.1.4.1.1588.2.1.1.1.1.31 5 swModel 1.3.6.1.4.1.1588.2.1.1.1.1.31 Indicates whether the switch is 7500 or 7500E.
5 swFabric Group swFabric Group swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 The current Fibre Channel domain ID of the switch. To set a new value, the switch (swAdmStatus) must be in offline or testing state.
swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 5 swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 Indicates whether the switch is the principal switch.
5 swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 The number of inter-switch links (ISLs) in the (immediate) neighborhood.
swVfId 1.3.6.1.4.1.1588.2.1.1.1.2.9 5 swVfId 1.3.6.1.4.1.1588.2.1.1.1.2.9 The VFID of the switch.
5 swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.10 swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.10 This table contains the ISLs in the immediate neighborhood of the switch.
swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.10.1 5 swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.10.1 An entry containing each neighbor ISL parameters.
5 swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.1 swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.1 The index for neighborhood entry.
swNbMyPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.2 5 swNbMyPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.2 This is the port that has an ISL to another switch. This value is the same as the physical port number of the local switch +1. The valid values for the Brocade 12000, 24000, and 48000 directors are 1 through the maximum number of ports +1.
5 swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.3 swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.3 This is the Fibre Channel domain on the other end of the ISL. This is the domain ID of the remote switch.Valid values are 1 through 239 as defined by FCS-SW.
swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.4 5 swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.4 This is the port index on the other end of the ISL. The physical port number of the remote switch, plus 1. The valid values for the Brocade 12000, 24000, and 48000 directors are 1 through the maximum number of ports +1.
5 swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.5 swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.5 The baud rate of the ISL. It is always unknown (0). Values Possible values are: • • • • • • • • • other (1) None of the following. oneEighth (2) 155 Mbaud. quarter (4) 266 Mbaud. half (8) 532 Mbaud. full (16) 1 Gbaud. double (32) 2 Gbaud. quadruple (64) 4 Gbaud. octuple(128) 8 Gbaud. decuple(256) 10 Gbaud.
swNbIslState 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.6 5 swNbIslState 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.6 The current state of the ISL. The possible values are as follwos. 0 - ISL is down. 1 - ISL is initiating and not yet operational. 2, 3, 4, - used for notification of internal states. 5 - ISL is active.
5 swNbIslCost 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.7 swNbIslCost 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.7 The current link cost of the ISL. In other words, the cost of a link to control the routing algorithm.
swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.8 5 swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.8 The WWN of the remote port.
5 swFabricMemTable 1.3.6.1.4.1.1588.2.1.1.1.2.11 swFabricMemTable 1.3.6.1.4.1.1588.2.1.1.1.2.11 Supported in Fabric OS v2.6.1 and not v3.2.0. This table contains information on the member switches of a fabric. This might not be available on all versions of Fabric OS. This is not available in v6.2.0.
swFabricMemEntry 1.3.6.1.4.1.1588.2.1.1.1.2.11.1 5 swFabricMemEntry 1.3.6.1.4.1.1588.2.1.1.1.2.11.1 An entry containing each switch in the fabric.
5 swFabricMemWwn 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.1 swFabricMemWwn 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.1 This object identifies the World Wide Name of the member switch.
swFabricMemDid 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.2 5 swFabricMemDid 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.2 This object identifies the domain ID of the member switch.
5 swFabricMemName 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.3 swFabricMemName 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.3 This object identifies the name of the member switch.
swFabricMemEIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.4 5 swFabricMemEIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.4 This object identifies the Ethernet IP address of the member switch.
5 swFabricMemFCIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.5 swFabricMemFCIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.5 This object identifies the Fibre Channel IP address of the member switch.
swFabricMemGWIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.6 5 swFabricMemGWIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.6 This object identifies the Gateway IP address of the member switch.
5 swFabricMemType 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.7 swFabricMemType 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.7 This object identifies the member switch type.
swFabricMemShortVersion 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.8 5 swFabricMemShortVersion 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.8 This object identifies the Fabric OS version of the member switch. Provides the short version of the Fabric OS version number.
5 swIDIDMode 1.3.6.1.4.1.1588.2.1.1.1.2.12 swIDIDMode 1.3.6.1.4.1.1588.2.1.1.1.2.12 This identifies the status of Insistent Domain ID (IDID) mode. Status indicating if IDID mode is enabled or not.
SW Agent Configuration Group 5 SW Agent Configuration Group swAgtCmtyTable 1.3.6.1.4.1.1588.2.1.1.1.4.11 A table that contains, one entry for each community, the access control and parameters of the community. The table displays all of the community strings (read and write) if it is accessed by the “write” community string. Only “read” community strings are displayed if it is accessed by the “read” community string. In Secure Fabric OS, the community strings can only be modified on the primary switch.
5 swAgtCmtyEntry 1.3.6.1.4.1.1588.2.1.1.1.4.11.1 swAgtCmtyEntry 1.3.6.1.4.1.1588.2.1.1.1.4.11.1 An entry containing the community parameters.
swAgtCmtyIdx 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.1 5 swAgtCmtyIdx 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.1 The SNMPv1 community entry. The return value for this entry is 1 through 6.
5 swAgtCmtyStr 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2 swAgtCmtyStr 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2 This is a community string supported by the agent. If a new value is set successfully, it takes effect immediately. Default values for communities are as follows: • • • • • • 1 (Secret Code) 2 (OrigEquipMfr) 3 (private) 4 (public) 5 (common) 6 (FibreChannel) Community strings 1-3 are read-write and strings 4-6 are read-only. You can change the community setting using the snmpconfig command.
swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3 5 swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3 This is the trap recipient associated with the community. If a new value is set successfully, it takes effect immediately. If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is not sent for the associated community string. With a setting of non-0.0.0.0 IP address, SNMP traps are sent to the host with the associated community string.
5 swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4 swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4 This is the trap severity level associated with swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3. The trap severity level, is in conjunction with the event’s severity level. When an event occurs, and if its severity level is at or below the set value, the SNMP trap is sent to configure trap recipients. The severity level is limited to particular events.
swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 5 swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 The maximum number of Fibre Channel ports on this switch. It includes U_Port, F_Port, FL_Port, and any other types of Fibre Channel port.
5 swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 A bit map of port status flags that includes the information of port type. Indicates whether the port is virtual or physical.
swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 5 swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 A table that contains one entry for each switch port, configuration and service parameters of the port.
5 swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 An entry containing the configuration and service parameters of the switch port.
swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 5 swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 The switch port index. Values The physical port number of the switch, plus 1. The valid values for the Brocade 12000, 24000, and 48000 directors are 0 through maximum number of ports.
5 swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 The type of ASIC for the switch port.
swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 5 swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 The physical state of the port. Values Possible values are: • noCard (1) No card is present in this switch slot. • noTransceiver (2) No Transceiver module in this port (Transceiver is the generic name for GBIC, SFP, and so on). • • • • • • • Fabric OS MIB Reference 53-1001156-01 laserFault (3) The module is signaling a laser fault (defective GBIC). noLight (4) The module is not receiving light.
5 swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 The operational status of the port. Values Possible values are: • • • • • 606 unknown (0) The port module is physically absent. online (1) User frames can be passed. offline (2) No user frames can be passed. testing (3) No user frames can be passed. faulty (4) The port module is physically faulty.
swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 5 swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 The desired state of the port. A management station might place the port in a desired state by setting this object accordingly. Values Possible values are: • • • • online (1) User frames can be passed. offline (2) No user frames can be passed. testing (3) No user frames can be passed. faulty (4) No user frames can be passed. For Fabric OS v3.
5 swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 Indicates the link state of the port. When the port's link state changes, its operational status (swFCPortOpStatus) is affected. Values Possible values are: • enabled (1) The port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in an FC-AL loop). • disabled (2) The port is not allowed to participate in the FC-PH protocol with its attached ports.
swFCPortTxType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 5 swFCPortTxType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 Indicates the media transmitter type of the port. Values Possible values are: • • • • • Fabric OS MIB Reference 53-1001156-01 unknown (1) Cannot determine the port driver. lw (2) Long wave laser. sw (3) Short wave laser. ld (4) Long wave LED. cu (5) Copper (electrical).
5 swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 Counts the number of Fibre Channel words that the port has transmitted. You can convert words to bytes by multiplying this value by 4.
swFCPortRxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 5 swFCPortRxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 Counts the number of Fibre Channel words that the port has received. You can convert words to bytes by multiplying this value by 4.
5 swFCPortTxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 swFCPortTxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 Counts the number of Fibre Channel frames that the port has transmitted.
swFCPortRxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 5 swFCPortRxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 Counts the number of Fibre Channel frames that the port has received.
5 swFCPortRxC2Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 swFCPortRxC2Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 Counts the number of Class 2 frames that the port has received.
swFCPortRxC3Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 5 swFCPortRxC3Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 Counts the number of Class 3 frames that the port has received.
5 swFCPortRxLCs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 swFCPortRxLCs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 Counts the number of link control frames that the port has received.
swFCPortRxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 5 swFCPortRxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 Counts the number of multicast frames that the port has received.
5 swFCPortTooManyRdys 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 swFCPortTooManyRdys 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 Counts the number of times that RDYs exceeds the frames received.
swFCPortNoTxCredits 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 5 swFCPortNoTxCredits 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 Counts the number of times that the transmit credit has reached 0.
5 swFCPortRxEncInFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21 swFCPortRxEncInFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21 Counts the number of encoding error or disparity error inside frames received.
swFCPortRxCrcs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 5 swFCPortRxCrcs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 Counts the number of CRC errors detected for frames received.
5 swFCPortRxTruncs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 swFCPortRxTruncs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 Counts the number of truncated frames that the port has received.
swFCPortRxTooLongs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 5 swFCPortRxTooLongs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 Counts the number of received frames that are too long.
5 swFCPortRxBadEofs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 swFCPortRxBadEofs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 Counts the number of received frames that have bad EOF delimiters.
swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 5 swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 Counts the number of encoding error or disparity error outside frames received.
5 swFCPortRxBadOs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 swFCPortRxBadOs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 Counts the number of invalid ordered sets received.
swFCPortC3Discards 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 5 swFCPortC3Discards 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 Counts the number of Class 3 frames that the port has discarded.
5 swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 Counts the number of multicast frames that have been timed out.
swFCPortTxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 5 swFCPortTxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 Counts the number of multicast frames that have been transmitted.
5 swFCPortLipIns 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 swFCPortLipIns 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 Counts the number of loop initializations that have been initiated by loop devices attached.
swFCPortLipOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 5 swFCPortLipOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 Counts the number of loop initializations that have been initiated by the port.
5 swFCPortLipLastAlpa 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 swFCPortLipLastAlpa 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 Indicates the physical address (AL_PA) of the loop device that initiated the last loop initialization.
swFCPortWwn 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 5 swFCPortWwn 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 The WWN of the Fibre Channel port. The contents of an instance are in IEEE extended format, as specified in FC-PH.
5 swFCPortSpeed 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 swFCPortSpeed 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 The desired baud rate for the port. Values 634 The baud rate can be 1 Gbit/sec, 2 Gbit/sec, autonegotiate, or 4 Gbit/sec or 8 Gbit/sec. 4 Gbit/sec is only applicable to the Brocade 4100, 4900, 7500, 7600, and 48000.8 Gbit/sec is only applicable to the Brocade DCX director.
swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 5 swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 Supported in Fabric OS v4.1.x and later. A string that indicates the name of the addressed port. NOTE The names should be persistent across switch reboots. Port names do not have to be unique within a switch or within a fabric.
5 swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 This string indicates the physical port number of the addressed port. This string can be entered as argument on CLI commands such as portShow or wherever a physical port number is expected. The format of the string is: port, 'slot' being present only for bladed systems. For directors, such as Brocade 48000: swFCPortSpecifier.
swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 5 swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 This string is a bit map of the port status flags, including the port type.
5 swFCPortBrcdType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 swFCPortBrcdType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 This string indicates the Brocade port type.
Name Server Database Group 5 Name Server Database Group swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 The number of local Name Server entries.
5 swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 The table of local Name Server entries.
swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 5 swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 An entry from the local Name Server database.
5 swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 The index of the Name Server database entry.
swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 5 swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 The Fibre Channel port address ID of the entry.
5 swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 The type of port for this entry.
swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 5 swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 The Fibre Channel WWN of the port entry.
5 swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 The contents of a symbolic name of the port entry. In FC-GS-2, a symbolic name consists of a byte array of 1 through 256 bytes, and the first byte of the array specifies the length of its contents. This object variable corresponds to the contents of the symbolic name, with the first byte removed.
swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 5 swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 The Fibre Channel WWN of the associated node, as defined in FC-GS-2.
5 swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.7 swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.7 The contents of a Symbolic Name of the node associated with the entry. In FC-GS-2, a Symbolic Name consists of a byte array of 1 through 256 bytes, and the first byte of the array specifies the length of its contents. This object variable corresponds to the contents of the Symbolic Name, with the first byte removed.
swNsIPA 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.8 5 swNsIPA 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.8 The Initial Process Associators of the node for the entry as defined in FC-GS-2. This value is read-only and cannot be changed.
5 swNsIpAddress 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.9 swNsIpAddress 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.9 The IP address of the node for the entry as defined in FC-GS-2. The format of the address is in IPv6.
swNsCos 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10 5 swNsCos 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10 The class of services supported by the port.
5 swNsFc4 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.11 swNsFc4 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.11 The FC-4s supported by the port, as defined in FC-GS-2.
swNsIpNxPort 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.12 5 swNsIpNxPort 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.12 The object identifies IpAddress of the Nx_Port for the entry.
5 swNsWwn 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.13 swNsWwn 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.13 The object identifies the World Wide Name (WWN) of the Fx_Port for the entry.
swNsHardAddr 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.14 5 swNsHardAddr 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.14 The object identifies the 24-bit hard address of the node for the entry.
5 Event Group Event Group Logically, the swEventTable is separate from the error log since it is essentially a view of the error log within a particular time window.
swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1 5 swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1 swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4, in the absence of swEventTrapLevel, specifies the trap severity level of each defined trap recipient host. This object specifies the swEventTrap level in conjunction with an event’s severity level.
5 swEventNumEntries 1.3.6.1.4.1.1588.2.1.1.1.8.4 swEventNumEntries 1.3.6.1.4.1.1588.2.1.1.1.8.4 The number of entries in the event table. Values (v3.0 only) The value ranges from 0 to 64. (v4.0 only) The value ranges from 0 to 255. (v4.2 only) The value ranges from 0 to 2048. (v4.4 and above) The value ranges from 0 to 1024. (v6.
swEventTable 1.3.6.1.4.1.1588.2.1.1.1.8.5 5 swEventTable 1.3.6.1.4.1.1588.2.1.1.1.8.5 The table of event entries. The events will be received from the CHASSIS and the created logical switches. Only external RASlog messages are supported. Fabric OS v6.2.0 does not have Panic or Debug level messages. All messages are documented in the Fabric OS Message Reference.
5 swEventEntry 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 swEventEntry 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 An entry of the event table.
swEventIndex 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1 5 swEventIndex 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1 The index of the event entry.
5 swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 The date and time that this event occurred.
swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 5 swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 The severity level of this event entry.
5 swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4 swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4 If the most recent event is the same as the previous, this number increments by 1, and is the count of consecutive times this particular event has occurred.
swEventDescr 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 5 swEventDescr 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 A textual description of the event. For Fabric OS v6.2.0, the format of error messages has changed. This field now uses the message title and number (for example, WEBD-1006) and the message text. Previously this field used the task ID, and all the message number and message text. For more information on error messages, refer to the Fabric OS Message Reference.
5 Fabric Watch Group Fabric Watch Group The Fabric Watch group contains one license scalar and two tables. • The scalar, swFwFabricWatchLicense, is used to tell is if the switch has proper license for Fabric Watch. • One table, “swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2”, contains classArea information such as threshold unit string, time base, low thresholds, and so forth. SwFwClassAreaEntry contains control information for a particular class/area's thresholds.
swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 5 swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 If the license key is installed on the switch for Fabric Watch, the return value is swFwLicensed; otherwise, the value is swFwNotLicensed.
5 swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 The table of classes and areas.
swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 5 swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 An entry of the classes and areas.
5 swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 This index represents the Fabric Watch classArea combination.
swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 5 swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 This applies or cancels the configuration value changes. For a read operation, the return value is always swFwCancelWrite.
5 swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 A default unit string name, used to identify the unit of measure for a Fabric Watch classArea combination. C = environment (class), temperature (area). RPM = environment (class), fan (area).
swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 5 swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 A default polling period for the Fabric Watch classArea combination. swFwTbMin = port (class), link loss (area). swFwTbNone = environment (class), temperature (area).
5 swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 A default low threshold value.
swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.6 5 swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.6 A default high threshold value.
5 swFwDefaultBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.7 swFwDefaultBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.7 A default buffer size value.
swFwCustUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.8 5 swFwCustUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.8 A customizable unit string name, used to identify the unit of measure for a Fabric Watch classArea combination. C = environment (class), temperature (area). RPM = environment (class), fan (area).
5 swFwCustTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.9 swFwCustTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.9 A customizable polling period for the Fabric Watch classArea combination. swFwTbMin = port (class), link loss (area). swFwTbNone = environment (class), temperature (area).
swFwCustLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.10 5 swFwCustLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.10 A customizable low-threshold value for a Fabric Watch classArea combination.
5 swFwCustHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.11 swFwCustHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.11 A customizable high-threshold value for a Fabric Watch classArea combination.
swFwCustBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.12 5 swFwCustBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.12 A customizable buffer size value for a Fabric Watch classArea combination.
5 swFwThLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.13 swFwThLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.13 swFwThLevel is used to point to the current level for classArea values. It is either default or custom. For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete.
swFwWriteActVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14 5 swFwWriteActVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14 This applies or cancels the alarm value changes. For a read operation, the return value is always swFwCancelWrite. The following are the custom alarm variables that can be modified: swFwCustChangedActs swFwCustExceededActs swFwCustBelowActs swFwCustAboveActs swFwCustInBetweenActs Changes to these custom alarm variables can be saved by setting this variable to swFwApplyWrite.
5 swFwDefaultChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15 swFwDefaultChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15 Default action matrix for changed event.
swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16 5 swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16 Default action matrix for an exceeded event. The exceeded value might be either above the high threshold or below the low threshold.
5 swFwDefaultBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.17 swFwDefaultBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.17 Default action matrix for below event.
swFwDefaultAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.18 5 swFwDefaultAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.18 Default action matrix for above event.
5 swFwDefaultInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.19 swFwDefaultInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.19 Default action matrix for in-between event.
swFwCustChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.20 5 swFwCustChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.20 Custom action matrix for changed event.
5 swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 Custom action matrix for an exceeded event.
swFwCustBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.22 5 swFwCustBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.22 Custom action matrix for below event.
5 swFwCustAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.23 swFwCustAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.23 Custom action matrix for above event.
swFwCustInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.24 5 swFwCustInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.24 Custom action matrix for in-between event.
5 swFwValidActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.25 swFwValidActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.25 Matrix of valid acts for a classArea.
swFwActLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.26 5 swFwActLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.26 Pointer to the current level for classArea values. It is either default or custom. For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete.
5 swFwThresholdTable 1.3.6.1.4.1.1588.2.1.1.1.10.3 swFwThresholdTable 1.3.6.1.4.1.1588.2.1.1.1.10.3 The table of individual thresholds.
swFwThresholdEntry 1.3.6.1.4.1.1588.2.1.1.1.10.3.1 5 swFwThresholdEntry 1.3.6.1.4.1.1588.2.1.1.1.10.3.1 An entry of an individual threshold.
5 swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 Represents the element index of a threshold. For environment class, the indexes are from 2 through (number of environment sensors+1).
swFwStatus 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.2 5 swFwStatus 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.2 Indicates whether a threshold is enabled or disabled.
5 swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3 swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3 Name of the threshold. For examples, refer to Table 15.
swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.
5 swFwLabel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4 swFwLabel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4 Label of the threshold. Refer to “swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3” on page 700.
swFwCurVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.5 5 swFwCurVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.5 Current counter of the threshold.
5 swFwLastEvent 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.6 swFwLastEvent 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.6 Last event type of the threshold.
swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7 5 swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7 Last event value of the threshold.
5 swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8 swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8 Last event time of the threshold. This value is in the same format as in swCurrentDate.
swFwLastState 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9 5 swFwLastState 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9 Last event state of the threshold.
5 swFwBehaviorType 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.10 swFwBehaviorType 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.10 A behavior of which the thresholds generate event.
swFwBehaviorInt 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.11 5 swFwBehaviorInt 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.11 An integer of which the thresholds generate continuous event.
5 swFwLastSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.12 swFwLastSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.12 This object is a last event severity level of the threshold. This object obsoletes swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1.
End Device Group 5 End Device Group swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 The table of RLS for individual end devices. By default, no data appears in this table.
5 swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 An entry of an individual end devices' RLS. Index swEndDevicePort, swEndDeviceAlpa Since Brocade switches start with port # 0, the SNMP port # should be physical port # plus 1. In turn, that means that SNMP port # 3 translates to port # 2.
swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 5 swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 This object represents the port of the local switch to which the end device is connected. This is an obsolete entry and does not show any value.
5 swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 This object represents the AL_PA of the end device. SNMP AL_PA number should be the logical AL_PA number plus 1. For example, SNMP AL_PA number 0xf0 translates to 0xef. This is an obsolete entry and does not show any value.
swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 5 swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 The Fibre Channel port address ID of the entry.
5 swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 Link failure count for the end device.
swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 5 swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 Sync loss count for the end device.
5 swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 Sig loss count for the end device.
swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.7 5 swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.7 Protocol err count for the end device.
5 swEndDeviceInvalidWord 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.8 swEndDeviceInvalidWord 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.8 Invalid word count for the end device.
swEndDeviceInvalidCRC 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9 5 swEndDeviceInvalidCRC 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9 Invalid CRC count for the end device. Switch Group Not supported.
5 swGroupTable 1.3.6.1.4.1.1588.2.1.1.1.22.1 swGroupTable 1.3.6.1.4.1.1588.2.1.1.1.22.1 The table of groups. This is not available on all versions of Fabric OS.
swGroupEntry 1.3.6.1.4.1.1588.2.1.1.1.22.1.1 5 swGroupEntry 1.3.6.1.4.1.1588.2.1.1.1.22.1.1 An entry of table of groups.
5 swGroupIndex 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.1 swGroupIndex 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.1 This object is the group index, starting from 1.
swGroupName 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.2 5 swGroupName 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.2 This object identifies the name of the group.
5 swGroupType 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.3 swGroupType 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.3 This object identifies the type of the group.
swGroupMemTable 1.3.6.1.4.1.1588.2.1.1.1.22.2 5 swGroupMemTable 1.3.6.1.4.1.1588.2.1.1.1.22.2 The table of members of all groups. This might not be available on all versions of the Fabric OS.
5 swGroupMemEntry 1.3.6.1.4.1.1588.2.1.1.1.22.2.1 swGroupMemEntry 1.3.6.1.4.1.1588.2.1.1.1.22.2.1 An entry for a member of a group.
swGroupID 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.1 5 swGroupID 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.1 This object identifies the Group ID of the member switch.
5 swGroupMemWwn 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.2 swGroupMemWwn 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.2 This object identifies the WWN of the member switch.
swGroupMemPos 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.3 5 swGroupMemPos 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.3 This object identifies the position of the member switch in the group, based on the order that the switches were added in the group.
5 ASIC Performance Monitoring Group ASIC Performance Monitoring Group swBlmPerfALPAMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.1 AL_PA monitoring counter table. For the Brocade 4100, 12 filter monitors per port are supported.
swBlmPerfALPAMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.1.1 5 swBlmPerfALPAMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.1.1 AL_PA monitoring counter for given AL_PA.
5 swBlmPerfAlpaPort 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.1 swBlmPerfAlpaPort 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.1 This object identifies the port index of the switch.
swBlmPerfAlpaIndx 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.2 5 swBlmPerfAlpaIndx 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.2 This object identifies the AL_PA index. There can be 126 AL_PA values.
5 swBlmPerfAlpa 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3 swBlmPerfAlpa 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3 This object identifies the AL_PA values. These values range between x'01' and x'EF' (1 to 239). AL_PA value x'00' is reserved for FL_Port. If Alpha device is invalid, then it will have -1 value.
swBlmPerfAlpaCRCCnt 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.4 5 swBlmPerfAlpaCRCCnt 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.4 Get CRC count for given AL_PA and port. This monitoring provides information on the number of CRC errors that occurred on the frames destined to each possible AL_PA attached to a specific port. For the Brocade 4100, this value will always be 0. CRC counters are not supported on this platform.
5 swBlmPerfEEMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.2 swBlmPerfEEMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.2 End-to-end monitoring counter table.
swBlmPerfEEMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.2.1 5 swBlmPerfEEMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.2.1 End-to-end monitoring counter for given port.
5 swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1 swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1 This object identifies the port number of the switch.
swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2 5 swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2 This object identifies the reference number of the counter. This reference is a number assigned when a filter is created. In the SNMP Index, start with one instead of 0, add one to the actual reference key.
5 swBlmPerfEECRC 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.3 swBlmPerfEECRC 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.3 End-to-end CRC error for the frames that matched the SID-DID pair.
swBlmPerfEEFCWRx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.4 5 swBlmPerfEEFCWRx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.4 Get end-to-end count of Fibre Channel words (FCW) received by the port that matched the SID-DID pair.
5 swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5 swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5 Get end-to-end count of Fibre Channel words (FCW) transmitted by the port that matched the SID-DID pair.
swBlmPerfEESid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.6 5 swBlmPerfEESid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.6 Gets DID information by reference number.
5 swBlmPerfEEDid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.7 swBlmPerfEEDid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.7 Gets SID information by reference number. SID (Source Identifier) is a 3-byte field in the frame header used to indicate the address identifier of the N_Port from which the frame was sent.
swBlmPerfFltMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.3 5 swBlmPerfFltMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.3 Filter-based monitoring counter.
5 swBlmPerfFltMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.3.1 swBlmPerfFltMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.3.1 Filter-based monitoring counter for given port.
swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1 5 swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1 This object identifies the port number of the switch.
5 swBlmPerfFltRefkey 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2 swBlmPerfFltRefkey 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2 This object identifies the reference number of the filter. This reference number is assigned when a filter is created. In the SNMP Index, start with one instead of 0, add one to actual reference key.
swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3 5 swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3 Get statistics of filter-based monitor.
5 swBlmPerfFltAlias 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4 swBlmPerfFltAlias 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4 Alias name for the filter.
Trunking Group 5 Trunking Group swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 Whether the switch supports the trunking feature or not: no (0) or yes (8).
5 swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 Displays trunking information for the switch. For the Brocade 4100, cc ports per trunk are supported.
swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 5 swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 Entry for the trunking table.
5 swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 This object identifies the switch port index. The value of a port index is extracted from the second octet of the port WWN stored in swFCPortWwn (Refer to swFCPortWwn 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 in the Fibre Channel Port Group).
swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 5 swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 This object is a logical entity that specifies the group number to which the port belongs. If this value is 0, the port is not trunked.
5 swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 Port number that is the trunk master of the group. The trunk master implicitly defines the group. All ports with the same master are considered to be part of the same group.
swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 5 swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 The active trunk status of the member port. Values are enabled (1) or disabled (0).
5 swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 Displays trunking performance information for the switch.
swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 5 swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 Entry for the trunking group table.
5 swTrunkGrpNumber 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.1 swTrunkGrpNumber 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.1 This object is a logical entity that specifies the group number to which port belongs.
swTrunkGrpMaster 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.2 5 swTrunkGrpMaster 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.2 This object gives the master port ID for the trunk group.
5 swTrunkGrpTx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3 swTrunkGrpTx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3 Gives the aggregate value of the transmitted words from this trunk group. NOTE The syntax for this MIB variable is an OCTET STRING. The output is shown in hexadecimal value. The value of swTrunkGrpTx is the 4-byte word transmitted in the TrunkGrp port. This value can be obtained through the CLI in the output of the portStatsShow command (stat_wtx value) for the corresponding trunk ports.
swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.4 5 swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.4 Gives the aggregate value of the received words by this trunk group. The syntax for this MIB variable is an OCTET STRING. The output is shown in hexadecimal value. The value of swTrunkGrpRx is the 4-byte word received in the TrunkGrp port. This value can be obtained through the CLI in the output of the portStatsShow command (stat_wrx value) for the corresponding trunk ports.
5 swTopTalkerMntMode 1.3.6.1.4.1.1588.2.1.1.1.25.1 swTopTalkerMntMode 1.3.6.1.4.1.1588.2.1.1.1.25.1 This object gives the mode in which toptalker is installed. Fabricmode(1) and fportmode(2) are the possible modes.
swTopTalkerMntNumEntries 1.3.6.1.4.1.1588.2.1.1.1.25.2 5 swTopTalkerMntNumEntries 1.3.6.1.4.1.1588.2.1.1.1.25.2 This object provides the number of toptalking flows that are existing in the switch.
5 swTopTalkerMntTable 1.3.6.1.4.1.1588.2.1.1.1.25.3 swTopTalkerMntTable 1.3.6.1.4.1.1588.2.1.1.1.25.3 Table to display toptalkingflows.
swTopTalkerMntEntry 1.3.6.1.4.1.1588.2.1.1.1.25.3.1 5 swTopTalkerMntEntry 1.3.6.1.4.1.1588.2.1.1.1.25.3.1 Entry for the toptalkingflows.
5 swTopTalkerMntIndex 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.1 swTopTalkerMntIndex 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.1 This object identifies the list/object entry. The possibles values are one to maximum number of entries.
swTopTalkerMntPort 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.2 5 swTopTalkerMntPort 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.2 This object identifies the switch port number on which the F_port mode toptalker is added. This attribute is applicable to F_port mode only.
5 swTopTalkerMntSpid 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.3 swTopTalkerMntSpid 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.3 This object identifies the SID of the host.
swTopTalkerMntDpid 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.4 5 swTopTalkerMntDpid 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.4 This object identifies the DID of the SID-DID pair.
5 swTopTalkerMntflow 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.5 swTopTalkerMntflow 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.5 This object identifies the traffic flow in MB/sec.
Chapter 6 High-Availability MIB Objects This chapter provides descriptions and other information specific to High-Availability MIB object types and includes the following sections: • HA MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • High-Availability Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FRU Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 HA MIB Overview - fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 - fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 - fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 - fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 - fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 - fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 - fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 - fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.6 - fruSupplierRevCode 1.3.6.1.4.1.1588.2.1.2.1.5.1.7 - fruHistoryTable 1.3.6.1.4.1.1588.2.1.2.1.6 - fruHistoryEntry 1.3.6.1.4.1.
High-Availability Group 6 High-Availability Group This section describes the MIB objects in the High-Availability group.
6 haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 Indicates whether the system is redundant. Values Possible values are: • 1: redundant(0) Dual CP with standby CP ready to take over. • 2: nonredundant(1) Single or Dual CP system where the standby CP is not available to take over operation of the switch.
FRU Table 6 FRU Table fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 This table inventories the field replaceable unit (FRU) slots available. This table contains an entry for each entry in the entPhysicalTable that has entPhysicalClass set to “Container (5)” and has a child entry having entPhysicalIsFRU set to “true (1)”. In Fabric OS v6.1.0 and above the chassis is marked as a FRU. Unlike other FRUs the chassis FRU does not have a corresponding container entry.
6 fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 An entry for FRU slot in the fruTable.
fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 6 fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 The type of the FRU object that this slot can hold.
6 fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 The current status of the FRU object in the slot.
fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 6 fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 The slot number of the blade, and the unit number for everything else.
6 fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 The supplier ID.
fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 6 fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 The supplier part number.
6 fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.6 fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.6 The supplier serial number.
fruSupplierRevCode 1.3.6.1.4.1.1588.2.1.2.1.5.1.7 6 fruSupplierRevCode 1.3.6.1.4.1.1588.2.1.2.1.5.1.7 The supplier revision code.
6 FRU History Table FRU History Table fruHistoryTable 1.3.6.1.4.1.1588.2.1.2.1.6 This table gives the contents of the entire history log of the FRU events.
fruHistoryEntry 1.3.6.1.4.1.1588.2.1.2.1.6.1 6 fruHistoryEntry 1.3.6.1.4.1.1588.2.1.2.1.6.1 An entry in this table represents a particular FRU event.
6 fruHistoryIndex 1.3.6.1.4.1.1588.2.1.2.1.6.1.1 fruHistoryIndex 1.3.6.1.4.1.1588.2.1.2.1.6.1.1 Index of the FRU event in the history table.
fruHistoryClass 1.3.6.1.4.1.1588.2.1.2.1.6.1.2 6 fruHistoryClass 1.3.6.1.4.1.1588.2.1.2.1.6.1.2 The type of the FRU object related to the event.
6 fruHistoryObjectNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.3 fruHistoryObjectNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.3 The slot number of the blade and the unit number for everything else.
fruHistoryEvent 1.3.6.1.4.1.1588.2.1.2.1.6.1.4 6 fruHistoryEvent 1.3.6.1.4.1.1588.2.1.2.1.6.1.4 The type of the FRU event.
6 fruHistoryTime 1.3.6.1.4.1.1588.2.1.2.1.6.1.5 fruHistoryTime 1.3.6.1.4.1.1588.2.1.2.1.6.1.5 The time at which this event happened.
fruHistoryFactoryPartNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.6 6 fruHistoryFactoryPartNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.6 The Brocade part number of the FRU object.
6 fruHistoryFactorySerialNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 fruHistoryFactorySerialNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 The Brocade serial number of the FRU object.
CP Table 6 CP Table cpTable 1.3.6.1.4.1.1588.2.1.2.1.7 This table lists all the CPs in the system.
6 cpEntry 1.3.6.1.4.1.1588.2.1.2.1.7.1 cpEntry 1.3.6.1.4.1.1588.2.1.2.1.7.1 An entry represents a single CP in the system.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 6 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP.
connUnitNumports 1.3.6.1.3.94.1.6.1.4 8 connUnitNumports 1.3.6.1.3.94.1.6.1.4 Number of physical ports (between 0 and the maximum number of system supported ports) in the connectivity unit (internal/embedded, external). To determine the maximum number of system supported ports, use the SNMP GET command on swFcPortCapacity. The Brocade switches support 0 to maximum number of system supported ports. NOTE The ConnUnitNumports will not count the GE ports present on Iron man blade.
8 connUnitState 1.3.6.1.3.94.1.6.1.5 connUnitState 1.3.6.1.3.94.1.6.1.5 Overall state of the connectivity unit. Values Possible values are: • unknown (1) • online (2) Set the state to online. • offline (3) Set the state to offline.
connUnitStatus 1.3.6.1.3.94.1.6.1.6 8 connUnitStatus 1.3.6.1.3.94.1.6.1.6 Overall status of the connectivity unit. Values Possible values are: • • • • • unknown (1) unused (2) ok (3) warning (4) - Needs attention.
8 connUnitProduct 1.3.6.1.3.94.1.6.1.7 connUnitProduct 1.3.6.1.3.94.1.6.1.7 The connectivity unit vendor's product model name. This is the same as for sysDescr (set for as many as 79 bytes). If the switch is in Access Gateway mode, the default value is Access Gateway.
connUnitSn 1.3.6.1.3.94.1.6.1.8 8 connUnitSn 1.3.6.1.3.94.1.6.1.8 The serial number for this connectivity unit. Set to the SSN (which by default is the WWN).
8 connUnitUpTime 1.3.6.1.3.94.1.6.1.9 connUnitUpTime 1.3.6.1.3.94.1.6.1.9 The number of centiseconds since the last unit initialization. Set when connUnitTable is initialized.
connUnitUrl 1.3.6.1.3.94.1.6.1.10 8 connUnitUrl 1.3.6.1.3.94.1.6.1.10 URL to launch a management application, if applicable; otherwise an empty string. In a standalone unit, this would be the same as the top-level URL. This has the same definition as systemURL for keywords. (Same as systemURL.) The expected value for connUnitURL.0 is: “http://{a.b.c.d}” where {a.b.c.d} is the IP address of the switch if Web Tools license is available.
8 connUnitDomainId 1.3.6.1.3.94.1.6.1.11 connUnitDomainId 1.3.6.1.3.94.1.6.1.11 24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading 0s if required. If this value is not applicable, return all bits to 1. Set to the switch domain ID (as per FC-SW). For a Brocade Access Gateway device, the value is hard coded as “11 11 11”. A Brocade Access Gateway does not have a domain ID.
connUnitProxyMaster 1.3.6.1.3.94.1.6.1.12 8 connUnitProxyMaster 1.3.6.1.3.94.1.6.1.12 A value of “yes” means this is the proxy master unit for a set of managed units. Values Possible values are: • unknown (1) • no (2) • yes (3) This could be the only unit with a management card in it for a set of units. A standalone unit should return “yes” for this object. Set to 3 (yes).
8 connUnitPrincipal 1.3.6.1.3.94.1.6.1.13 connUnitPrincipal 1.3.6.1.3.94.1.6.1.13 Indicates whether this connectivity unit is the principal unit within the group of fabric elements. If this value is not applicable, it returns “unknown.” If the switch is principal, this is set to 3 (yes); otherwise, for a fabric switch it is set to 2 (no). For a Brocade Access Gateway device, since the switch is behaving as a device management tool and not a Fibre Channel switch, the value is set to 1 (unknown).
connUnitNumSensors 1.3.6.1.3.94.1.6.1.14 8 connUnitNumSensors 1.3.6.1.3.94.1.6.1.14 Number of sensors (between 0 and maximum number of sensors) in the connUnitSensorTable. Refer to Table 14 on page 552 for specific sensor counts on the various switches.
8 connUnitStatusChangeTime 1.3.6.1.3.94.1.6.1.15 connUnitStatusChangeTime 1.3.6.1.3.94.1.6.1.15 The sysuptime time stamp (in centiseconds) at which the last status change occurred for any members of the set; this is the latest time stamp that connUnitStatus or connUnitPortStatus changed. Not supported.
connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16 8 connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16 The sysuptime time stamp (in centiseconds) at which the last configuration change occurred for any members of the set. In other words, this is the latest time stamp of flash memory update. This represents a union of change information for connUnitConfigurationChangeTime Not supported.
8 connUnitNumRevs 1.3.6.1.3.94.1.6.1.17 connUnitNumRevs 1.3.6.1.3.94.1.6.1.17 The number of revisions in connUnitRevsTable. Set to 2.
connUnitNumZones 1.3.6.1.3.94.1.6.1.18 8 connUnitNumZones 1.3.6.1.3.94.1.6.1.18 Number of zones defined in connUnitZoneTable. Not supported.
8 connUnitModuleId 1.3.6.1.3.94.1.6.1.19 connUnitModuleId 1.3.6.1.3.94.1.6.1.19 This is a unique ID, persistent between boots, that can be used to group a set of connUnits together into a module. The intended use would be to create a connUnit with a connUnitType of “module” to represent a physical or logical group of connectivity units. Then the value of the group would be set to the value of connUnitId for this “container” connUnit. connUnitModuleId should be 0s if this connUnit is not part of a module.
connUnitName 1.3.6.1.3.94.1.6.1.20 8 connUnitName 1.3.6.1.3.94.1.6.1.20 A display string containing a name for this connectivity unit. This object value should be persistent between boots. Set to switchName/sysName.
8 connUnitInfo 1.3.6.1.3.94.1.6.1.21 connUnitInfo 1.3.6.1.3.94.1.6.1.21 A display string containing information about this connectivity unit. This object value should be persistent between boots. For a fabric switch set to sysDescr and read-only. For a Brocade Access Gateway device set to “Access Gateway.
connUnitControl 1.3.6.1.3.94.1.6.1.22 8 connUnitControl 1.3.6.1.3.94.1.6.1.22 Controls the addressed connUnit. Each implementation might choose not to allow any or all of these values on a SET. Cold start and warm start are as defined in MIB-II and are not meant to be a factory reset.
8 connUnitContact 1.3.6.1.3.94.1.6.1.23 connUnitContact 1.3.6.1.3.94.1.6.1.23 Contact information for this connectivity unit. Displays the same value as sysContact. Changing the value in this variable causes the value in sysContact to also be changed.
connUnitLocation 1.3.6.1.3.94.1.6.1.24 8 connUnitLocation 1.3.6.1.3.94.1.6.1.24 Location information for this connectivity unit. Displays the same value as sysLocation.
8 connUnitEventFilter 1.3.6.1.3.94.1.6.1.25 connUnitEventFilter 1.3.6.1.3.94.1.6.1.25 Defines the event severity logged by this connectivity unit. All events of severity less than or equal to connUnitEventFilter are logged in connUnitEventTable. Return 910 Always returns value 9 (debug).
connUnitNumEvents 1.3.6.1.3.94.1.6.1.26 8 connUnitNumEvents 1.3.6.1.3.94.1.6.1.26 Number of events currently in connUnitEventTable. Values For Fabric OS v3.0 this value ranges from 0 to 64. For Fabric OS v4.0 this value ranges from 0 to 255. For Fabric OS v4.2 this value ranges from 0 to 2048. For Fabric OS v4.4 this value ranges from 0 to 1024. For Fabric OS v5.0.1 this value ranges from 0 to 1024.
8 connUnitMaxEvents 1.3.6.1.3.94.1.6.1.27 connUnitMaxEvents 1.3.6.1.3.94.1.6.1.27 Maximum number of events that can be defined in connUnitEventTable. Values For Fabric OS v3.0 this value is 64. For Fabric OS v4.0 this value is 255. For Fabric OS v4.2 this value is 2048. For Fabric OS v4.4 this value is 1024. For Fabric OS v5.0.1 this value is 1024. For Fabric OS v6.0.0 this value ranges from 0 to 1024. For Fabric OS v6.1.0 this value ranges from 0 to 1024. For Fabric OS v6.2.
connUnitEventCurrID 1.3.6.1.3.94.1.6.1.28 8 connUnitEventCurrID 1.3.6.1.3.94.1.6.1.28 The last-used event ID (connUnitEventId). Maximum is 2147483647 (231-1).
8 connUnitRevsTable 1.3.6.1.3.94.1.7 connUnitRevsTable 1.3.6.1.3.94.1.7 Table of the revisions supported by connectivity units managed by this agent. Usage Notes This table lists the versions of hardware and software elements in the switch. One entry for the hardware platform version and another entry for the Fabric OS version. For example, for the Brocade 4100 the hardware platform number is 32.0. The Fabric OS version for this release is 5.1.
connUnitRevsEntry 1.3.6.1.3.94.1.7.1 8 connUnitRevsEntry 1.3.6.1.3.94.1.7.1 Table of the revisions supported by connectivity units managed by this agent.
8 connUnitRevsUnitId 1.3.6.1.3.94.1.7.1.1 connUnitRevsUnitId 1.3.6.1.3.94.1.7.1.1 The connUnitId value for the connectivity unit that contains this revision table.
connUnitRevsIndex 1.3.6.1.3.94.1.7.1.2 8 connUnitRevsIndex 1.3.6.1.3.94.1.7.1.2 A unique value among all connUnitRevsEntrys with the same value of connUnitRevsUnitId, in the range between 1 and connUnitNumRevs. Index 1 returns the hardware version. Index 2 returns the software version.
8 connUnitRevsRevId 1.3.6.1.3.94.1.7.1.3 connUnitRevsRevId 1.3.6.1.3.94.1.7.1.3 A vendor-specific string identifying a revision of a component of the connUnit indexed by connUnitRevsUnitId. Index 1 returns the switchType from switchShow. Index 2 returns the Fabric OS version from telnet command version: for example, v2.6.
connUnitRevsDescription 1.3.6.1.3.94.1.7.1.4 8 connUnitRevsDescription 1.3.6.1.3.94.1.7.1.4 Description of a component to which the revision corresponds. Index 1 returns the hardware version. Index 2 returns the software version.
8 connUnitSensorTable 1.3.6.1.3.94.1.8 connUnitSensorTable 1.3.6.1.3.94.1.8 Table of the sensors supported by each connectivity unit managed by this agent. Refer to Table 14 on page 552 for specific sensor counts on the various switches.
connUnitSensorEntry 1.3.6.1.3.94.1.8.1 8 connUnitSensorEntry 1.3.6.1.3.94.1.8.1 Each entry contains the information for a specific sensor.
8 connUnitSensorUnitId 1.3.6.1.3.94.1.8.1.1 connUnitSensorUnitId 1.3.6.1.3.94.1.8.1.1 The connUnitId value of the connectivity unit that contains this sensor table. Set to connUnitId.
connUnitSensorIndex 1.3.6.1.3.94.1.8.1.2 8 connUnitSensorIndex 1.3.6.1.3.94.1.8.1.2 A unique value among all connUnitSensorEntrys with the same value of connUnitSensorUnitId, in the range between 1 and the return value from connUnitNumSensor.
8 connUnitSensorName 1.3.6.1.3.94.1.8.1.3 connUnitSensorName 1.3.6.1.3.94.1.8.1.3 A textual identification of the sensor, intended primarily for operator use. Each contains the name of sensor in textual format: for example, Temp #1, Fan #2, and so on.
connUnitSensorStatus 1.3.6.1.3.94.1.8.1.4 8 connUnitSensorStatus 1.3.6.1.3.94.1.8.1.4 The status indicated by the sensor. Values Possible values are: • • • • • • Fabric OS MIB Reference 53-1001156-01 unknown (1) other (2) ok (3) The sensor indicates okay. Warning (4) The sensor indicates a warning. failed (5) The sensor indicates failure. Nominal = 3 (ok).
8 connUnitSensorInfo 1.3.6.1.3.94.1.8.1.5 connUnitSensorInfo 1.3.6.1.3.94.1.8.1.5 Miscellaneous static information about the sensor, such as its serial number. Each contains textual information about the sensor. Return 926 Returns the serial ID if this is for the power supply; otherwise, returns Null.
connUnitSensorMessage 1.3.6.1.3.94.1.8.1.6 8 connUnitSensorMessage 1.3.6.1.3.94.1.8.1.6 This describes the status of the sensor as a message. It may also provide some information about the sensor, for example: sensor 1: type 3 is OK, value is 33 Each contains the sensor status (and reading if applicable) in textual format.
8 connUnitSensorType 1.3.6.1.3.94.1.8.1.7 connUnitSensorType 1.3.6.1.3.94.1.8.1.7 The type of component being monitored by this sensor. Values Possible values are: • • • • • • • • • unknown (1) other (2) battery (3) fan (4) power-supply (5) transmitter (6) enclosure (7) board (8) receiver (9) The following mapping is for each individual sensor, where applicable.
connUnitSensorCharacteristic 1.3.6.1.3.94.1.8.1.8 8 connUnitSensorCharacteristic 1.3.6.1.3.94.1.8.1.8 The characteristics being monitored by this sensor.
8 connUnitPortTable 1.3.6.1.3.94.1.10 connUnitPortTable 1.3.6.1.3.94.1.10 Generic information on ports for a specific connUnit NOTE Information about the GbE ports on a Brocade 7500 or FR4-18i blade is not supported.
connUnitPortEntry 1.3.6.1.3.94.1.10.1 8 connUnitPortEntry 1.3.6.1.3.94.1.10.1 Each entry contains the information for a specific port.
8 connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 The connUnitId value of the connectivity unit that contains this port. Same value as connUnitId.
connUnitPortIndex 1.3.6.1.3.94.1.10.1.2 8 connUnitPortIndex 1.3.6.1.3.94.1.10.1.2 Number of physical ports between 0 and maximum number of system supported ports in the connectivity unit (internal/embedded, external). To determine the maximum number of system supported ports, use the SNMP GET command on swFcPortCapacity. The Brocade switches support 0 to maximum number of system supported ports.
8 connUnitPortType 1.3.6.1.3.94.1.10.1.3 connUnitPortType 1.3.6.1.3.94.1.10.1.3 The port type. For EX_Port, VEX_Port and VE_Port, the port type will be shown as other. For a Brocade Access Gateway device, the port type can be either F_Port (f-port) or N_Port (n-port) only. Values Possible values are: • • • • • • • • • • • • • • • • • • • 934 unknown (1) other (2) not-present (3) hub-port (4) n-port (5) End port for fabric. l-port (6) End port for loop. fl-port (7) Public loop. f-port (8) Fabric port.
connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 8 connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 Bit mask that specifies the classes of service capability of this port. If this is not applicable, return all bits set to 0. The bits have the following definition: • • • • • • • • unknown 0 class-f 1 class-one 2 class-two 4 class-three 8 class-four 16 class-five 32 class-six 64 For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D.
8 connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 Bit mask that specifies the classes of service that are currently operational. If this is not applicable, return all bits set to 0. This object has the same definition as connUnitPortFCClassCap. For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D. For a Brocade Access Gateway both the F_Port and N_Port this value is 0x0008.
connUnitPortState 1.3.6.1.3.94.1.10.1.6 8 connUnitPortState 1.3.6.1.3.94.1.10.1.6 The state of the port hardware. Values Possible values are: • • • • • unavailable (1) Do not use. online (2) Available for meaningful work. offline (3) Not available for meaningful work. bypassed (4) No longer used. diagnostics (5) Map to your testing. (Not supported in Fabric OS v2.6.1.) For an E, F, or FL_Port, the value is online. For a U_Port, the value is offline (disabled, testing, faulted).
8 connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 An overall protocol status for the port. For a U_Port, the status should be ols (9). Values Possible values are: • • • • • • • • • unknown (1) unused (2) Device cannot report this status. ready (3) FCAL Loop or FCPH Link reset protocol initialization has completed. warning (4) Do not use. failure (5) Port is faulty. notparticipating (6) Loop not participating and does not have a loop address. Do not use.
connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 8 connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 The technology of the port transceiver. Values Possible values are: • • • • • • • • • • • unknown (1) other (2) unused (3) shortwave (4) longwave (5) copper (6) scsi (7) longwaveNoOFC (8) shortwaveNoOFC (9) longwaveLED (10) ssa (11) (Not supported in Fabric OS v2.6.1.) For an external FC_Port, this value should be 9 (shortwaveNoOFC), 8 (longwaveNoOFC), or 6 (copper).
8 connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 The module type of the port connector. Values Possible values are: • • • • • • • • • unknown (1) other (2) gbic (3) embedded (4) Fixed (oneXnine) glm (5) gbicSerialId (6) gbicNoSerialId (7) gbicNotInstalled (8) smallFormFactor (9) For an external FC_Port with GBIC, this value is set to 6 (gbicSerialId) or 7 (gbicNoSerialId). For an external FC_Port without GBIC, this value is set to 8 (gbicNotInstalled).
connUnitPortWwn 1.3.6.1.3.94.1.10.1.10 8 connUnitPortWwn 1.3.6.1.3.94.1.10.1.10 The World Wide Name of the port, if applicable; otherwise, an empty string. This is in IEEE Extended format, and the extension contains the internal port number of each port. NOTE The internal port number is 1 less than the port index. For example, if the switch has WWN 10:00:00:60:69:10:02:18, then port numbers 0 and 6 have WWN 20:00:00:60:69:10:02:18 and 20:06:00:60:69:10:02:18, respectively.
8 connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits. If this is a loop, then it is the AL_PA that is connected. If this is an E_Port, then it contains only the domain ID, left justified, 0 filled. If this port does not have a Fibre Channel address, return all bits set to 1. For an F_Port, this is the Fibre Channel ID to which the connected N_port is assigned.
connUnitPortSn 1.3.6.1.3.94.1.10.1.12 8 connUnitPortSn 1.3.6.1.3.94.1.10.1.12 The serial number of the unit (for example, for a GBIC). If this is not applicable, return an empty string. If the GBIC has a serial ID, the return value is the GBIC part number; otherwise, the return value is Null.
8 connUnitPortRevision 1.3.6.1.3.94.1.10.1.13 connUnitPortRevision 1.3.6.1.3.94.1.10.1.13 The port revision (for example, GBIC). Return 944 If the GBIC has a serial ID, this returns the GBIC revision number; otherwise, it returns a Null value.
connUnitPortVendor 1.3.6.1.3.94.1.10.1.14 8 connUnitPortVendor 1.3.6.1.3.94.1.10.1.14 The port vendor (for example, for a GBIC). Return If the GBIC has a serial ID, this returns the GBIC vendor name; otherwise, it returns a Null value.
8 connUnitPortSpeed 1.3.6.1.3.94.1.10.1.15 connUnitPortSpeed 1.3.6.1.3.94.1.10.1.15 The speed of the port, in kilobytes per second. For example, the valid values for Brocade 12000, 24000, and 48000 directors: 125,000 KBps, 250,000 KBps, or 500,000 KBps depending on the configuration.
connUnitPortControl 1.3.6.1.3.94.1.10.1.16 8 connUnitPortControl 1.3.6.1.3.94.1.10.1.16 Controls the addressed connUnit’s port. Valid commands are: • resetConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific reset operation. Examples of these operations are: • The Link Reset protocol. • The Loop Initialization protocol.
8 connUnitPortControl 1.3.6.1.3.94.1.10.1.16 • Addition of the port from an arbitrated loop by a hub. Each implementation might choose not to allow any or all of these values on a SET. If the management station uses in-band communication (FC-IP) with the switch, either of the two following actions might result in a loss of in-band communication with the switch.
connUnitPortName 1.3.6.1.3.94.1.10.1.17 8 connUnitPortName 1.3.6.1.3.94.1.10.1.17 A string describing the addressed port. This object is read-only for Brocade switches.
8 connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18 connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18 This is the internal port number by which this port is known. In many implementations, this should be the same as connUnitPortIndex. Some implementations might have an internal port representation not compatible with the rules for table indices. In these cases, provide the internal representation of this port in this object.
connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 8 connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 This OID is depricated. This contains the OID of the first object of the table that contains the statistics for this particular port. If this has a value of 0, then there are no statistics available for this port. The port type information helps identify the statistics objects found in the table. From this point, use the getnext command to get the next statistics object.
8 connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20 connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20 Not supported in Fabric OS v2.6.1. This is the bit mask that specifies the driver-level protocol capability of this port. If this is not applicable, return all bits set to 0. Return value = 07F The bits have the following definition.
connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.21 8 connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.21 Not supported in Fabric OS v2.6.1.Supported in v5.x, v6.0. This is the bit mask that specifies the driver level protocol(s) that are currently operational. Return value = 07F If this is not applicable, return all bits set to zero.
8 connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22 connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22 Not supported in Fabric OS v2.6.1. Supported in v5.x, v6.0. The node World Wide Name of the port, if applicable; otherwise, an empty string. All related ports in within a group should have the same node WWN value. The container is defined as the largest physical entity. All ports on HBAs on a host will have the same node WWN. All ports on the same storage subsystem will have the same node WWN.
connUnitPortHWState 1.3.6.1.3.94.1.10.1.23 8 connUnitPortHWState 1.3.6.1.3.94.1.10.1.23 Not supported in Fabric OS v2.6.1. The state of the port as detected by the hardware. Values Possible values are: • • • • • • • • Fabric OS MIB Reference 53-1001156-01 unknown (1) failed (2) Port failed diagnostics (port_flt_state). bypassed (3) FCAL bypass, loop only (not used). active (4) Connected to a device (light and sync are present). loopback (5) Port in ext loopback (loopback state).
8 connUnitEventTable 1.3.6.1.3.94.1.11 connUnitEventTable 1.3.6.1.3.94.1.11 The table of connectivity unit events. Errors, warnings, and information should be reported in this table. • • • • • (v3.0 only) This table contains the 64 most-recent event log entries. (v4.0 only) This table contains the 255 most-recent event log entries. (v4.2 only) This table contains the 2048 most-recent event log entries. (v4.4 and above) This table contains the 1024 most-recent event log entries. (v6.
connUnitEventEntry 1.3.6.1.3.94.1.11.1 8 connUnitEventEntry 1.3.6.1.3.94.1.11.1 Each entry contains information on a specific event for the given connectivity unit.
8 connUnitEventUnitId 1.3.6.1.3.94.1.11.1.1 connUnitEventUnitId 1.3.6.1.3.94.1.11.1.1 The connUnitId of the connectivity unit that contains this event table. Same as connUnitId.
connUnitEventIndex 1.3.6.1.3.94.1.11.1.2 8 connUnitEventIndex 1.3.6.1.3.94.1.11.1.2 Each connectivity unit has its own event buffer. As it wraps, it might write over previous events. This object is an index into the buffer. It is recommended that this table is read using “getNext”s to retrieve the initial table.
8 connUnitEventId 1.3.6.1.3.94.1.11.1.3 connUnitEventId 1.3.6.1.3.94.1.11.1.3 The internal event ID. Incriminated for each event, ranging between 0 and connUnitMaxEvents. Not used as table index to simplify the agent implementation. When this reaches the end of the range specified by connUnitMaxEvents, the ID rolls over to start at 0. This value is set back to 0 at reset.
connUnitREventTime 1.3.6.1.3.94.1.11.1.4 8 connUnitREventTime 1.3.6.1.3.94.1.11.1.4 This is the real time when the event occurred. It has the following format. DDMMYYYY HHMMSS Where: DD = day number MM = month number YYYY = year HH = hours MM = minutes SS = seconds If not applicable, returns a null string.
8 connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 This is the sysuptime time stamp when the event occurred.
connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 8 connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 The event severity level. The mapping between errorlog severity level and this variable is: Error log none (0) Critical (1) Error (2) Warning (3) Informational (4) Debug (5) FA-MIB unknown (1) critical (4) error (5) warning (6) info (8) debug (9) Refer to FcEventSeverity in Table 20 on page 879 for more information about severity.
8 connUnitEventType 1.3.6.1.3.94.1.11.1.7 connUnitEventType 1.3.6.1.3.94.1.11.1.7 The type of this event. Values Possible values are: • • • • • unknown (1) other (2) status (3) configuration (4) topology (5) Always set to 2 (other).
connUnitEventObject 1.3.6.1.3.94.1.11.1.8 8 connUnitEventObject 1.3.6.1.3.94.1.11.1.8 This is used with the connUnitEventType to identify to which object the event refers. It can be the OID of a connectivity unit or of another object, like connUnitPortStatus[...]. Values Always set to null.
8 connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 The description of the event. Same as the string displayed in the system error log. The system error log can be viewed using the errShow or errDump commands. For Fabric OS v6.2.0, the format of error messages has changed. This field now uses the message title and number (for example, WEBD-1006) and the message text. Previously, this field used the task ID and all the message number and message text.
connUnitLinkTable 1.3.6.1.3.94.1.12 8 connUnitLinkTable 1.3.6.1.3.94.1.12 A list of links known to this agent from this connectivity unit to other connectivity units- X is switch data and Y is other end.
8 connUnitLinkEntry 1.3.6.1.3.94.1.12.1 connUnitLinkEntry 1.3.6.1.3.94.1.12.1 An entry describing a particular link to another.
connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 8 connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 The connUnitId of the connectivity unit that contains this link table. Values Set to WWN of the local switch.
8 connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 This value is used to create a unique value for each entry in the link table with the same connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the next candidate to be used. This value is allowed to wrap at the highest value represented by the number of bits. This value is reset to 0 when the system is reset and the first value to be used is 1.
connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 8 connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is a connUnit in the responding agent, then the value of this object must be equal to its connUnitID. WWN of the local switch.
8 connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 The port number on the unit specified by connUnitLinkNodeIdX, if known; otherwise, -1. If the value is nonnegative, then it is equal to connUnitPortPhysicalNumber. ISL- Physical port number of the E_Port. Device- Physical port # to which the device is connected.
connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 8 connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 The port WWN of the unit specified by connUnitLinkNodeIdX, if known; otherwise, 16 octets of binary 0. This is the WWN of the port to which the device is connected.
8 connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 The node WWN of the unit at the other end of the link. If the node WWN is unknown and the node is a connUnit in the responding SNMP agency, then the value of this object must be equal to its connUnitID. ISL- WWN of the remote switch. Device- Node name of the device.
connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 8 connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 The port number on the unit specified by connUnitLinkNodeIdY, if known; otherwise, -1. If the value is nonnegative then it is equal to connUnitPortPhysicalNumber. ISL- Physical port number of the remote port. Device: -1.
8 connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8 connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8 The port WWN on the unit specified by connUnitLinkNodeIdY, if known; otherwise, 16 octets of binary 0. ISL- WWN of the remote port. Device- Port name.
connUnitLinkAgentAddressY 1.3.6.1.3.94.1.12.1.9 8 connUnitLinkAgentAddressY 1.3.6.1.3.94.1.12.1.9 The address of an FCMGMT MIB agent for the node identified by connUnitLinkNodeIdY, if known; otherwise, 16 octets of binary 0. ISL- IP address (IPv4). Device- 0 (Null).
8 connUnitLinkAgentAddressTypeY 1.3.6.1.3.94.1.12.1.10 connUnitLinkAgentAddressTypeY 1.3.6.1.3.94.1.12.1.10 If connUnitLinkAgentAddressY is nonzero, it is a protocol address. ConnUnitLinkAgentAddressTypeY is the “address family number” assigned by IANA to identify the address format (for example, 1 is Ipv4, 2 is Ipv6). ISL- Type 1. Device- 0 (Null).
connUnitLinkAgentPortY 1.3.6.1.3.94.1.12.1.11 8 connUnitLinkAgentPortY 1.3.6.1.3.94.1.12.1.11 The IP port number for the agent. This is provided in case the agent is at a non-standard SNMP port. ISL- IP port. Device- 0 (Null).
8 connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12 connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12 Type of the FC connectivity unit, as defined in connUnitType. • ISL- Switch device. • End devices- End device types based on an FCP Inquiry. Brocade does not support Hubs.
connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 8 connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a Big Endian value of 24 bits. If this is loop, then it is the AL_PA that is connected. If this is an E_port, then it contains only the domain ID. If not any of those, unknown or cascaded loop, return all bits set to 1. ISL- Port ID of the remote port. Device- Port ID of the remote port.
8 connUnitLinkCurrIndex 1.3.6.1.3.94.1.12.1.14 connUnitLinkCurrIndex 1.3.6.1.3.94.1.12.1.14 Not supported in Fabric OS v2.6.1. The last-used link index. Statistics Group Not supported in Fabric OS v2.6.1. Port types are aggregated into a port type class, such as all the fabric port types. Each individual port has only one statistics table.
connUnitPortStatTable 1.3.6.1.3.94.4.5 8 connUnitPortStatTable 1.3.6.1.3.94.4.5 A list of statistics for the fabric port types.
8 connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 An entry describing port statistics.
connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 8 connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 The connUnitId of the connectivity unit that contains this port statistics table.
8 connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 A unique value among all entries in this table, between 0 and connUnitNumPort[connUnitPortUnitId].
connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.3 8 connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.3 A count of the errors that have occurred on this port.
8 connUnitPortStatCountTxObjects 1.3.6.1.3.94.4.5.1.4 connUnitPortStatCountTxObjects 1.3.6.1.3.94.4.5.1.4 The number of frames, packets, IOs, and so forth, that have been transmitted by this port. A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices should not count frames passed through. This value represents the sum total for all other Tx objects.
connUnitPortStatCountRxObjects 1.3.6.1.3.94.4.5.1.5 8 connUnitPortStatCountRxObjects 1.3.6.1.3.94.4.5.1.5 The number of frames, packets, IOs, and so forth, that have been received by this port. A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices should not count frames passed through. This value represents the sum total for all other Rx objects.
8 connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6 connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6 The number of octets or bytes that have been transmitted by this port. There is an one-second periodic polling of the port. This value is saved and compared with the next polled value to compute net throughput. For Fibre Channel, ordered sets are not included in the count.
connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7 8 connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7 The number of octets or bytes that have been received by this port. There is an one-second periodic polling of the port. This value is saved and compared with the next polled value to compute net throughput. For Fibre Channel, ordered sets are not included in the count.
8 connUnitPortStatCountBBCreditZero 1.3.6.1.3.94.4.5.1.8 connUnitPortStatCountBBCreditZero 1.3.6.1.3.94.4.5.1.8 The number of transitions in/out of BB credit zero state. The other side is not providing any credit. This is a Fibre Channel statistic only.
connUnitPortStatCountInputBuffersFull 1.3.6.1.3.94.4.5.1.9 8 connUnitPortStatCountInputBuffersFull 1.3.6.1.3.94.4.5.1.9 Supported. The number of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to 0. There is no credit to provide to other side. Return Value- 80 0 0 0 0 0 0 0 (Not Supported) This is a Fibre Channel statistic only.
8 connUnitPortStatCountFBSYFrames 1.3.6.1.3.94.4.5.1.10 connUnitPortStatCountFBSYFrames 1.3.6.1.3.94.4.5.1.10 The number of times that FBSY was returned to this port as a result of a frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. Port can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel only statistic. This is the sum of all classes.
connUnitPortStatCountPBSYFrames 1.3.6.1.3.94.4.5.1.11 8 connUnitPortStatCountPBSYFrames 1.3.6.1.3.94.4.5.1.11 Supported. The number of times that PBSY was returned to this port as a result of a frame that could not be delivered to the other end of the link. This occurs if the destination port is temporarily busy. PBSY can only occur on SOFc1 frames (the frames that establish a connection). Return Value- 80 0 0 0 0 0 0 0 (not supported) This is a Fibre Channel only statistic.
8 connUnitPortStatCountFRJTFrames 1.3.6.1.3.94.4.5.1.12 connUnitPortStatCountFRJTFrames 1.3.6.1.3.94.4.5.1.12 The number of times that FRJT was returned to this port as a result of a frame that was rejected by the fabric. This is the total for all classes and is a Fibre Channel only statistic.
connUnitPortStatCountPRJTFrames 1.3.6.1.3.94.4.5.1.13 8 connUnitPortStatCountPRJTFrames 1.3.6.1.3.94.4.5.1.13 Supported. The number of times that FRJT was returned to this port as a result of a frame that was rejected at the destination N_Port. Return Value- 80 0 0 0 0 0 0 0 This is the total for all classes and is a Fibre Channel only statistic.
8 connUnitPortStatCountClass1RxFrames 1.3.6.1.3.94.4.5.1.14 connUnitPortStatCountClass1RxFrames 1.3.6.1.3.94.4.5.1.14 The number of Class 1 Frames received at this port. This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames.
connUnitPortStatCountClass1TxFrames 1.3.6.1.3.94.4.5.1.15 8 connUnitPortStatCountClass1TxFrames 1.3.6.1.3.94.4.5.1.15 The number of Class 1 Frames transmitted out this port. This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames.
8 connUnitPortStatCountClass1FBSYFrames 1.3.6.1.3.94.4.5.1.16 connUnitPortStatCountClass1FBSYFrames 1.3.6.1.3.94.4.5.1.16 The number of times that FBSY was returned to this port as a result of a Class 1 Frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames.
connUnitPortStatCountClass1PBSYFrames 1.3.6.1.3.94.4.5.1.17 8 connUnitPortStatCountClass1PBSYFrames 1.3.6.1.3.94.4.5.1.17 The number of times that PBSY was returned to this port as a result of a Class 1 Frame that could not be delivered to the other end of the link. This occurs if the destination N_Port is temporarily busy. PBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames.
8 connUnitPortStatCountClass1FRJTFrames 1.3.6.1.3.94.4.5.1.18 connUnitPortStatCountClass1FRJTFrames 1.3.6.1.3.94.4.5.1.18 The number of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected by the fabric. This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames.
connUnitPortStatCountClass1PRJTFrames 1.3.6.1.3.94.4.5.1.19 8 connUnitPortStatCountClass1PRJTFrames 1.3.6.1.3.94.4.5.1.19 The number of times that FRJT was returned to this port as a result of a Class 1 Frame that was rejected at the destination N_Port. This is a Fibre Channel only statistic. Brocade does not support Class 1 Frames.
8 connUnitPortStatCountClass2RxFrames 1.3.6.1.3.94.4.5.1.20 connUnitPortStatCountClass2RxFrames 1.3.6.1.3.94.4.5.1.20 The number of Class 2 Frames received at this port. This is a Fibre Channel only statistic. Not supported.
connUnitPortStatCountClass2TxFrames 1.3.6.1.3.94.4.5.1.21 8 connUnitPortStatCountClass2TxFrames 1.3.6.1.3.94.4.5.1.21 The number of Class 2 Frames transmitted out this port. This is a Fibre Channel only statistic. Not supported.
8 connUnitPortStatCountClass2FBSYFrames 1.3.6.1.3.94.4.5.1.22 connUnitPortStatCountClass2FBSYFrames 1.3.6.1.3.94.4.5.1.22 The number of times that FBSY was returned to this port because Class 2 Frame that could not be delivered to the other end of the link. This occurs if either the Fabric or the destination port is temporarily busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel only statistic. Not supported.
connUnitPortStatCountClass2PBSYFrames 1.3.6.1.3.94.4.5.1.23 8 connUnitPortStatCountClass2PBSYFrames 1.3.6.1.3.94.4.5.1.23 The number of times that PBSY was returned to this port as a result of a Class 2 Frame that could not be delivered to the other end of the link. This occurs if the destination N_Port is temporarily busy. PBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel only statistic. Not supported.
8 connUnitPortStatCountClass2FRJTFrames 1.3.6.1.3.94.4.5.1.24 connUnitPortStatCountClass2FRJTFrames 1.3.6.1.3.94.4.5.1.24 The number of times that FRJT was returned to this port as a result of a Class 2 Frame that was rejected by the fabric. This is a Fibre Channel only statistic. Not supported.
connUnitPortStatCountClass2PRJTFrames 1.3.6.1.3.94.4.5.1.25 8 connUnitPortStatCountClass2PRJTFrames 1.3.6.1.3.94.4.5.1.25 The number of times that FRJT was returned to this port as a result of a Class 2 Frame that was rejected at the destination N_Port. This is a Fibre Channel only statistic. Not supported.
8 connUnitPortStatCountClass3RxFrames 1.3.6.1.3.94.4.5.1.26 connUnitPortStatCountClass3RxFrames 1.3.6.1.3.94.4.5.1.26 The number of Class 3 Frames received at this port. This is a Fibre Channel only statistic. Not supported.
connUnitPortStatCountClass3TxFrames 1.3.6.1.3.94.4.5.1.27 8 connUnitPortStatCountClass3TxFrames 1.3.6.1.3.94.4.5.1.27 The number of Class 3 Frames transmitted out this port. This is a Fibre Channel only statistic. Not supported.
8 connUnitPortStatCountClass3Discards 1.3.6.1.3.94.4.5.1.28 connUnitPortStatCountClass3Discards 1.3.6.1.3.94.4.5.1.28 The number of Class 3 Frames that were discarded upon reception at this port. There is no FBSY or FRJT generated for Class 3 Frames. They are discarded if they cannot be delivered. This is a Fibre Channel only statistic.
connUnitPortStatCountRxMulticastObjects 1.3.6.1.3.94.4.5.1.29 8 connUnitPortStatCountRxMulticastObjects 1.3.6.1.3.94.4.5.1.29 The number of multicast frames or packets received at this port.
8 connUnitPortStatCountTxMulticastObjects 1.3.6.1.3.94.4.5.1.30 connUnitPortStatCountTxMulticastObjects 1.3.6.1.3.94.4.5.1.30 The number of multicast frames or packets transmitted out this port.
connUnitPortStatCountRxBroadcastObjects 1.3.6.1.3.94.4.5.1.31 8 connUnitPortStatCountRxBroadcastObjects 1.3.6.1.3.94.4.5.1.31 The number of broadcast frames or packets received at this port. Not supported.
8 connUnitPortStatCountTxBroadcastObjects 1.3.6.1.3.94.4.5.1.32 connUnitPortStatCountTxBroadcastObjects 1.3.6.1.3.94.4.5.1.32 The number of broadcast frames or packets transmitted out this port. On a Fibre Channel loop, count only OPNr frames generated. Not supported.
connUnitPortStatCountRxLinkResets 1.3.6.1.3.94.4.5.1.33 8 connUnitPortStatCountRxLinkResets 1.3.6.1.3.94.4.5.1.33 The number of link resets. This is the number of LRs received. This is a Fibre Channel only statistic.
8 connUnitPortStatCountTxLinkResets 1.3.6.1.3.94.4.5.1.34 connUnitPortStatCountTxLinkResets 1.3.6.1.3.94.4.5.1.34 The number of link resets. This is the number LRs transmitted. This is a Fibre Channel only statistic.
connUnitPortStatCountNumberLinkResets 1.3.6.1.3.94.4.5.1.35 8 connUnitPortStatCountNumberLinkResets 1.3.6.1.3.94.4.5.1.35 The number of link resets and LIPs detected at this port. The number times the reset link protocol is initiated. This is a count of the logical resets, a count of the number of primitives. This is a Fibre Channel only statistic. Not supported.
8 connUnitPortStatCountRxOfflineSequences 1.3.6.1.3.94.4.5.1.36 connUnitPortStatCountRxOfflineSequences 1.3.6.1.3.94.4.5.1.36 The number of offline primitive OLS received at this port. This is a Fibre Channel only statistic.
connUnitPortStatCountTxOfflineSequences 1.3.6.1.3.94.4.5.1.37 8 connUnitPortStatCountTxOfflineSequences 1.3.6.1.3.94.4.5.1.37 The number of offline primitive OLS transmitted by this port. This is a Fibre Channel only statistic.
8 connUnitPortStatCountNumberOfflineSequences 1.3.6.1.3.94.4.5.1.38 connUnitPortStatCountNumberOfflineSequences 1.3.6.1.3.94.4.5.1.38 The number of offline primitive sequence received at this port. This is a Fibre Channel only statistic. Not supported.
connUnitPortStatCountLinkFailures 1.3.6.1.3.94.4.5.1.39 8 connUnitPortStatCountLinkFailures 1.3.6.1.3.94.4.5.1.39 The number of link failures. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) This is a Fibre Channel only statistic.
8 connUnitPortStatCountInvalidCRC 1.3.6.1.3.94.4.5.1.40 connUnitPortStatCountInvalidCRC 1.3.6.1.3.94.4.5.1.40 The number of frames received with invalid CRC. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) Loop ports should not count CRC errors passing through when monitoring. This is a Fibre Channel only statistic.
connUnitPortStatCountInvalidTxWords 1.3.6.1.3.94.4.5.1.41 8 connUnitPortStatCountInvalidTxWords 1.3.6.1.3.94.4.5.1.41 The number of invalid transmission words received at this port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) This is a Fibre Channel only statistic.
8 connUnitPortStatCountPrimitiveSequenceProtocolErrors 1.3.6.1.3.94.4.5.1.42 connUnitPortStatCountPrimitiveSequenceProtocolErrors 1.3.6.1.3.94.4.5.1.42 The number of primitive sequence protocol errors detected at this port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) This is a Fibre Channel only statistic.
connUnitPortStatCountLossofSignal 1.3.6.1.3.94.4.5.1.43 8 connUnitPortStatCountLossofSignal 1.3.6.1.3.94.4.5.1.43 The number of instances of signal loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) This is a Fibre Channel only statistic.
8 connUnitPortStatCountLossofSynchronization 1.3.6.1.3.94.4.5.1.44 connUnitPortStatCountLossofSynchronization 1.3.6.1.3.94.4.5.1.44 The number of instances of synchronization loss detected at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8) This is a Fibre Channel only statistic.
connUnitPortStatCountInvalidOrderedSets 1.3.6.1.3.94.4.5.1.45 8 connUnitPortStatCountInvalidOrderedSets 1.3.6.1.3.94.4.5.1.45 The number of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel only statistic.
8 connUnitPortStatCountFramesTooLong 1.3.6.1.3.94.4.5.1.46 connUnitPortStatCountFramesTooLong 1.3.6.1.3.94.4.5.1.46 The number of frames received at this port where the frame length was greater than what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of frame delimiter. This is a Fibre Channel only statistic.
connUnitPortStatCountFramesTruncated 1.3.6.1.3.94.4.5.1.47 8 connUnitPortStatCountFramesTruncated 1.3.6.1.3.94.4.5.1.47 The number of frames received at this port where the frame length was less than the minimum indicated by the frame header - normally 24 bytes, but it could be more if the DFCTL field indicates an optional header should have been present. This is a Fibre Channel only statistic.
8 connUnitPortStatCountAddressErrors 1.3.6.1.3.94.4.5.1.48 connUnitPortStatCountAddressErrors 1.3.6.1.3.94.4.5.1.48 The number of frames received with unknown addressing. For example, unknown SID or DID. The SID or DID is not known to the routing algorithm. This is a Fibre Channel only statistic.
connUnitPortStatCountDelimiterErrors 1.3.6.1.3.94.4.5.1.49 8 connUnitPortStatCountDelimiterErrors 1.3.6.1.3.94.4.5.1.49 The number of invalid frame delimiters received at this port. An example is a frame with a class 2 start and a class 3 at the end. This is a Fibre Channel only statistic.
8 connUnitPortStatCountEncodingDisparityErrors 1.3.6.1.3.94.4.5.1.50 connUnitPortStatCountEncodingDisparityErrors 1.3.6.1.3.94.4.5.1.50 The number of disparity errors received at this port. This is a Fibre Channel only statistic. Service Group Not supported in Fabric OS v2.6.1. Implementation of the Service group is mandatory for all systems. The Service group contains the following subgroups.
connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 8 connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 The maximum number of entries in the table.
8 connUnitSnsTable 1.3.6.1.3.94.5.2.1 connUnitSnsTable 1.3.6.1.3.94.5.2.1 This table contains an entry for each object registered with this port in the switch. Implementation of the Connectivity Unit Service Tables group is mandatory for all systems. A Brocade Access Gateway has no name server information; therefore this table is disabled.
connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 8 connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 The simple name server (SNS) table for the port represented by connUnitSnsPortIndex.
8 connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 The connUnitId of the connectivity unit that contains this name server table.
connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 8 connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 The physical port number of this SNS table entry. Each physical port has an SNS table with 1-n entries indexed by connUnitSnsPortIdentifier (port address). Chassis switches containing the FC4-16IP blade will have eight GbE ports and treated as iSCSI Virtual Initiator. These ports will be part of the name server (NS) database. connUnitTable will display each of these ports as a separate NS entry.
8 connUnitSnsPortIdentifier 1.3.6.1.3.94.5.2.1.1.3 connUnitSnsPortIdentifier 1.3.6.1.3.94.5.2.1.1.3 The port identifier for this entry in the SNS table.
connUnitSnsPortName 1.3.6.1.3.94.5.2.1.1.4 8 connUnitSnsPortName 1.3.6.1.3.94.5.2.1.1.4 The port name for this entry in the SNS table.
8 connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.5 connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.5 The node name for this entry in the SNS table.
connUnitSnsClassOfSvc 1.3.6.1.3.94.5.2.1.1.6 8 connUnitSnsClassOfSvc 1.3.6.1.3.94.5.2.1.1.6 The Classes of Service offered by this entry in the SNS table.
8 connUnitSnsNodeIPAddress 1.3.6.1.3.94.5.2.1.1.7 connUnitSnsNodeIPAddress 1.3.6.1.3.94.5.2.1.1.7 The IPv6 formatted address of the Node for this entry in the SNS table.
connUnitSnsProcAssoc 1.3.6.1.3.94.5.2.1.1.8 8 connUnitSnsProcAssoc 1.3.6.1.3.94.5.2.1.1.8 The process associator for this entry in the SNS table. Hard coded to FF.
8 connUnitSnsFC4Type 1.3.6.1.3.94.5.2.1.1.9 connUnitSnsFC4Type 1.3.6.1.3.94.5.2.1.1.9 The FC-4 types supported by this entry in the SNS table.
connUnitSnsPortType 1.3.6.1.3.94.5.2.1.1.10 8 connUnitSnsPortType 1.3.6.1.3.94.5.2.1.1.10 The port type of this entry in the SNS table.
8 connUnitSnsPortIPAddress 1.3.6.1.3.94.5.2.1.1.11 connUnitSnsPortIPAddress 1.3.6.1.3.94.5.2.1.1.11 The IPv6 formatted address of this entry in the SNS table.
connUnitSnsFabricPortName 1.3.6.1.3.94.5.2.1.1.12 8 connUnitSnsFabricPortName 1.3.6.1.3.94.5.2.1.1.12 The fabric port name of this entry in the SNS table.
8 connUnitSnsHardAddress 1.3.6.1.3.94.5.2.1.1.13 connUnitSnsHardAddress 1.3.6.1.3.94.5.2.1.1.13 The hard address of this entry in the SNS table.
connUnitSnsSymbolicPortName 1.3.6.1.3.94.5.2.1.1.14 8 connUnitSnsSymbolicPortName 1.3.6.1.3.94.5.2.1.1.14 The symbolic port name of this entry in the SNS table. If the attached device has only the symbolicPortName, the symbolicPortName is shown and the symbolicNodeName appears as "null".
8 connUnitSnsSymbolicNodeName 1.3.6.1.3.94.5.2.1.1.15 connUnitSnsSymbolicNodeName 1.3.6.1.3.94.5.2.1.1.15 The symbolic node name of this entry in the SNS table. If the attached device has only the symbolicNodename, the symbolicNodename is shown and the symbolicPortname appears as "null".
SNMP Trap Registration Group 8 SNMP Trap Registration Group trapMaxClients 1.3.6.1.3.94.2.1 The maximum number of SNMP trap recipients supported by the connectivity unit. Set to 6.
8 trapClientCount 1.3.6.1.3.94.2.2 trapClientCount 1.3.6.1.3.94.2.2 The current number of rows in the trap table.
trapRegTable 1.3.6.1.3.94.2.3 8 trapRegTable 1.3.6.1.3.94.2.3 A table containing a row for each IP address/port number to which traps are sent.
8 trapRegEntry 1.3.6.1.3.94.2.3.1 trapRegEntry 1.3.6.1.3.94.2.3.1 IP/port pair for a specific client.
trapRegIpAddress 1.3.6.1.3.94.2.3.1.1 8 trapRegIpAddress 1.3.6.1.3.94.2.3.1.1 The IP address of a client registered for traps.
8 trapRegPort 1.3.6.1.3.94.2.3.1.2 trapRegPort 1.3.6.1.3.94.2.3.1.2 The UDP port to send traps to for this host. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table. Set to 162.
trapRegFilter 1.3.6.1.3.94.2.3.1.3 8 trapRegFilter 1.3.6.1.3.94.2.3.1.3 This value defines the trap severity filter for this trap host. The connUnit sends traps to this host that have a severity level less than or equal to this value. The default value of this object is Warning.
8 trapRegRowState 1.3.6.1.3.94.2.3.1.4 trapRegRowState 1.3.6.1.3.94.2.3.1.4 Specifies the state of the row. This entry always returns rowActive and allows for read-only. TABLE 23 1060 TrapRegRowState for Read/Write State Description (Read) Description (Write) rowDestroy (1) Read- Can never happen. Write- Remove this row from the table. rowInactive (2) Read- Indicates that this row does exist but that traps are not enabled to be sent to the target.
Revision Number Scalar 8 Revision Number Scalar revisionNumber 1.3.6.1.3.94.3 This is the revision number for this MIB. The format of the revision value is as follows: 0 = High order major revision number 1 = Low order major revision number 2 = High order minor revision number 3 = Low order minor revision number The value is stored as an ASCII value. The following is the current value of this object. 0=0 1=3 2=0 3=0 This defines a revision of 03.00. Set to 0300.
8 FibreAlliance MIB Traps FibreAlliance MIB Traps connUnitStatusChange Enterprise Variables fcmgmt connUnitStatus, connUnitState The overall status of the connectivity unit has changed. Recommended severity level (for filtering)- alert. Generated when connUnitStatus changes. Refer to “connUnitStatus 1.3.6.1.3.94.1.6.1.6” on page 891 for a description of how the value is calculated. Sample trap output for Fabric OS v6.1.0connUnitStatus.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.
connUnitDeletedTrap 8 connUnitDeletedTrap Enterprise Variables fcmgmt connUnitId A connUnit has been deleted from this agent. Recommended severity level (for filtering)- warning. Not implemented.
8 connUnitEventTrap connUnitEventTrap Enterprise Variables fcmgmt connUnitEventId, connUnitEventType, connUnitEventObject, connUnitEventDescr An event has been generated by the connectivity unit. Recommended severity level (for filtering)- info. Sample trap output for Fabric OS v6.1.0connUnitEventId.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.354 = 354 connUnitEventType.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.354 = other(2) connUnitEventObject.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.
connUnitSensorStatusChange 8 connUnitSensorStatusChange Enterprise Variables fcmgmt connUnitSensorStatus Overall status of the connectivity unit has changed. This trap is generated whenever the status of the sensors (like fan, power supply, temperature) present in the connectivity unit changes. Sample trap output for Fabric OS v6.1.0. connUnitSensorStatus.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.
8 connUnitPortStatusChange connUnitPortStatusChange Enterprise Variables fcmgmt connUnitPortStatus, connUnitPortState Overall status of the connectivity unit changed. Recommended severity level (for filtering)- alert. This trap sends the instance of connUnitPortName as part of the trap; the instance string is NULL, if the port name is not defined for the specified port. Sample trap output for Fabric OS v6.1.0. connUnitPortStatus.16.0.0.96.105.144.109.136.0.0.0.0.0.0.0.0.29 = ready(3) connUnitPortState.
Chapter 9 FCIP MIB Objects This chapter contains descriptions and other information specific to iSCSI MIB object types, including the following. • FCIP MIB Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • fcipEntityInstanceTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • fcipLinkTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • FCIP Extended Link Table . . . . . . .
9 FCIP MIB Overview FCIP MIB System Organization of MIB Objects Figure 68, Figure 69, Figure 70, and Figure 71 depict the high level organization of the FCIP MIB relevant to the supported tables. Refer to RFC4044 for a description of the entire MIB. - iso - org - dod - internet - experimental - mgmt - mib-2 - fcipMIB 1.3.6.1.2.1.224 - fcipObjects - fcipconfig + fcipEntityInstanceTable .4 + fcipLinkTable .5 FIGURE 68 High Level Organization - fcipEntityInstanceEntry 1.3.6.1.2.1.224.1.1.4.
FCIP MIB Overview 9 fcipExtendedLinkRtt 1.3.6.1.4.1.1588.4.1.1.12 fcipExtendedLinkOoo 1.3.6.1.4.1.1588.4.1.1.13 fcipExtendedLinkSlowStarts 1.3.6.1.4.1.1588.4.1.1.
9 fcipEntityInstanceTable fcipEntityInstanceTable The fcipEntityInstancetable has an entry for each configured IP interface. The fcipEntryId is used to index the FCIP Extended link table, along with the fcipLinkIndex from the FCIP Link Table (fcipLinkTable).
fcipEntityInstanceEntry 1.3.6.1.2.1.224.1.1.4.1 9 fcipEntityInstanceEntry 1.3.6.1.2.1.224.1.1.4.1 An fcipEntityInstanceEntry is an entry in the fcipEntityInstanceTable that represents an IP interface configured on a 7500 or on an FC4-18i blade. There is an entry for each configured IP interface. An fcipEntityInstanceEntry comprises the following elements. • • • • • • • • Fabric OS MIB Reference 53-1001156-01 fcipEntityId 1.3.6.1.2.1.224.1.1.4.1.1 fcipEntityName 1.3.6.1.2.1.224.1.1.4.1.
9 fcipEntityId 1.3.6.1.2.1.224.1.1.4.1.1 fcipEntityId 1.3.6.1.2.1.224.1.1.4.1.1 The FCIP entity indentifier.
fcipEntityName 1.3.6.1.2.1.224.1.1.4.1.2 9 fcipEntityName 1.3.6.1.2.1.224.1.1.4.1.2 An administratively assigned name for the fcip entity. Example- IP interface on gigE 0 port.
9 fcipEntityAddressType 1.3.6.1.2.1.224.1.1.4.1.3 fcipEntityAddressType 1.3.6.1.2.1.224.1.1.4.1.3 The type of Internet address by which the entity is reachable. Only address types IPv4 and IPv6 are supported.
fcipEntityAddress 1.3.6.1.2.1.224.1.1.4.1.4 9 fcipEntityAddress 1.3.6.1.2.1.224.1.1.4.1.4 The Internet address for the entity, if configured. The format of this address is determined by the value of the fcipEntityAddressType object.
9 fcipEntityTcpConnPort 1.3.6.1.2.1.224.1.1.4.1.5 fcipEntityTcpConnPort 1.3.6.1.2.1.224.1.1.4.1.5 A TCP port other than the FCIP Well-Known port on which the FCIP entity listens for new TCP connection requests. It contains the value zero (0) if the FCIP Entity only listens on the Well-Known port. The default is 0. Not used.
fcipEntitySeqNumWrap 1.3.6.1.2.1.224.1.1.4.1.6 9 fcipEntitySeqNumWrap 1.3.6.1.2.1.224.1.1.4.1.6 An indication of whether the FCIP Entity supports protection against sequence number wrap Not used.
9 ifcipEntityPHBSupport 1.3.6.1.2.1.224.1.1.4.1.7 ifcipEntityPHBSupport 1.3.6.1.2.1.224.1.1.4.1.7 An indication of whether the FCIP Entity supports PHB IP quality of service (QoS). Not Used.
fcipEntityStatus 1.3.6.1.2.1.224.1.1.4.1.8 9 fcipEntityStatus 1.3.6.1.2.1.224.1.1.4.1.8 This object specifies the operational status of the row. When a management station sets the status to active(1), then the values for the objects fcipEntityName, fcipEntityAddressType, and fcipEntityAddress should be supplied as part of the set request. The values of the objects fcipEntityName, fcipEntityAddressType, and fcipEntityAddress can be changed if the row status is in active state.
9 fcipLinkEntry 1.3.6.1.2.1.224.1.1.5.1 fcipLinkEntry 1.3.6.1.2.1.224.1.1.5.1 A conceptual row of the FCIP link table containing information about a particular FCIP link. The values of the read-create objects in this table are persistent across system restarts. The following comprise an fcipLinkEntry. • • • • • • • • • • • • 1080 fcipLinkIndex 1.3.6.1.2.1.224.1.1.5.1.1 fcipLinkIfIndex 1.3.6.1.2.1.224.1.1.5.1.2 fcipLinkCost 1.3.6.1.2.1.224.1.1.5.1.3 fcipLinkLocalFcipEntityMode 1.3.6.1.2.1.224.1.1.5.1.
fcipLinkIndex 1.3.6.1.2.1.224.1.1.5.1.1 9 fcipLinkIndex 1.3.6.1.2.1.224.1.1.5.1.1 An integer that uniquely identifies one FCIP link within an FCIP entity.
9 fcipLinkIfIndex 1.3.6.1.2.1.224.1.1.5.1.2 fcipLinkIfIndex 1.3.6.1.2.1.224.1.1.5.1.2 The ifIndex value of the virtual interface corresponding to the FCIP Link running over TCP/IP. This is the same as the ifIndex value in the ifTable for the ifType of fcipLink.
fcipLinkCost 1.3.6.1.2.1.224.1.1.5.1.3 9 fcipLinkCost 1.3.6.1.2.1.224.1.1.5.1.3 The FSPF cost associated with this FCIP Link. The default is 0.
9 fcipLinkLocalFcipEntityMode 1.3.6.1.2.1.224.1.1.5.1.4 fcipLinkLocalFcipEntityMode 1.3.6.1.2.1.224.1.1.5.1.4 The mode of the local end of the FCIP link.
fcipLinkLocalFcipEntityAddressType 1.3.6.1.2.1.224.1.1.5.1.5 9 fcipLinkLocalFcipEntityAddressType 1.3.6.1.2.1.224.1.1.5.1.5 The type of Internet address contained in the corresponding instance of fcipLinkLocalFcipEntityAddress. Only address types IPv4 and IPv6 are supported.
9 fcipLinkLocalFcipEntityAddress 1.3.6.1.2.1.224.1.1.5.1.6 fcipLinkLocalFcipEntityAddress 1.3.6.1.2.1.224.1.1.5.1.6 The Internet address for the local end of this FCIP Link. The format of this object is determined by the value of the fcipLinkLocalFcipEntityAddressType object.
fcipLinkRemFcipEntityWWN 1.3.6.1.2.1.224.1.1.5.1.7 9 fcipLinkRemFcipEntityWWN 1.3.6.1.2.1.224.1.1.5.1.7 The World Wide Name of the remote FC Fabric Entity.
9 fcipLinkRemFcipEntityId 1.3.6.1.2.1.224.1.1.5.1.8 fcipLinkRemFcipEntityId 1.3.6.1.2.1.224.1.1.5.1.8 The identifier for the remote FCIP entity.
fcipLinkRemFcipEntityAddressType 1.3.6.1.2.1.224.1.1.5.1.9 9 fcipLinkRemFcipEntityAddressType 1.3.6.1.2.1.224.1.1.5.1.9 The type of Internet address contained in the corresponding instance of fcipLinkRemFcipEntityAddress. Only address types IPv4 and IPv6 are supported.
9 fcipLinkRemFcipEntityAddress 1.3.6.1.2.1.224.1.1.5.1.10 fcipLinkRemFcipEntityAddress 1.3.6.1.2.1.224.1.1.5.1.10 The Internet address for the remote end of this FCIP Link. The format of this object is determined by the value of the fcipLinkRemFcipEntityAddressType object.
fcipLinkStatus 1.3.6.1.2.1.224.1.1.5.1.11 9 fcipLinkStatus 1.3.6.1.2.1.224.1.1.5.1.11 This object specifies the operational status of the row. The values of objects fcipLinkLocalFcipEntityAddressType, fcipLinkLocalFcipEntityAddress, fcipLinkRemFcipEntityWWN, fcipLinkRemFcipEntityId, fcipLinkRemFcipEntityAddressType, and fcipLinkRemFcipEntityAddress can be changed if the row is in active(1) state. The object fcipLinkCost is set to the value zero(0) if no value is supplied at the time of row creation.
9 fcipLinkCreateTime 1.3.6.1.2.1.224.1.1.5.1.12 fcipLinkCreateTime 1.3.6.1.2.1.224.1.1.5.1.12 The value of sysUpTime when this entry was last created FCIP Extended Link Table The FCIP Extended Link Table contains statisical information about FCIP tunnel transport operation. The information stored in this table is returned in response to portshow fciptunnel commands. The table contains the following. • • • • • • • • • • • • • • 1092 fcipExtendedLinkIfIndex 1.3.6.1.4.1.1588.4.1.1.
fcipExtendedLinkIfIndex 1.3.6.1.4.1.1588.4.1.1.1 9 fcipExtendedLinkIfIndex 1.3.6.1.4.1.1588.4.1.1.1 The ifIndex value of the virtual interface corresponding to the FCIP Link running over TCP/IP.
9 fcipExtendedLinkTcpRetransmits 1.3.6.1.4.1.1588.4.1.1.2 fcipExtendedLinkTcpRetransmits 1.3.6.1.4.1.1588.4.1.1.2 A counter containing the number of retransmitted segments for an FC data transfer over an FCIP tunnel.
fcipExtendedLinkTcpDropped Packets 1.3.6.1.4.1.1588.4.1.1.3 9 fcipExtendedLinkTcpDropped Packets 1.3.6.1.4.1.1588.4.1.1.3 A counter containing the number of packets lost for FC control traffic and data transfer over an FCIP tunnel.
9 fcipExtendedLinkCompressionRatio 1.3.6.1.4.1.1588.4.1.1.4 fcipExtendedLinkCompressionRatio 1.3.6.1.4.1.1588.4.1.1.4 The ratio between compressed bytes and raw bytes over an FCIP tunnel.
fcipExtendedLinkTcpSmoothedRTT 1.3.6.1.4.1.1588.4.1.1.5 9 fcipExtendedLinkTcpSmoothedRTT 1.3.6.1.4.1.1588.4.1.1.5 The round trip time (latency) in milleseconds for a transfer over an FCIP tunnel.
9 fcipExtendedLinkRawBytes 1.3.6.1.4.1.1588.4.1.1.6 fcipExtendedLinkRawBytes 1.3.6.1.4.1.1588.4.1.1.6 The total number of raw bytes sent or received.
fcipExtendedLinkCompressedBytes 1.3.6.1.4.1.1588.4.1.1.7 9 fcipExtendedLinkCompressedBytes 1.3.6.1.4.1.1588.4.1.1.7 The total number of compressed bytes received over an FCIP tunnel.
9 fcipExtendedLinkConnectedCount 1.3.6.1.4.1.1588.4.1.1.8 fcipExtendedLinkConnectedCount 1.3.6.1.4.1.1588.4.1.1.8 The total number of TCP session connection.
fcipExtendedLinkRtxRtxTO 1.3.6.1.4.1.1588.4.1.1.9 9 fcipExtendedLinkRtxRtxTO 1.3.6.1.4.1.1588.4.1.1.9 A counter containing retransmit packets due to timeout.
9 fcipExtendedLinkRtxDupAck 1.3.6.1.4.1.1588.4.1.1.10 fcipExtendedLinkRtxDupAck 1.3.6.1.4.1.1588.4.1.1.10 A counter containing retransmit packets due to duplicate acknowledgement.
fcipExtendedLinkDupAck 1.3.6.1.4.1.1588.4.1.1.11 9 fcipExtendedLinkDupAck 1.3.6.1.4.1.1588.4.1.1.11 A counter containing duplicate acknowledgement packets.
9 fcipExtendedLinkRtt 1.3.6.1.4.1.1588.4.1.1.12 fcipExtendedLinkRtt 1.3.6.1.4.1.1588.4.1.1.12 The round trip time in milliseconds.
fcipExtendedLinkOoo 1.3.6.1.4.1.1588.4.1.1.13 9 fcipExtendedLinkOoo 1.3.6.1.4.1.1588.4.1.1.13 A counter containing TCP out-of-order.
9 fcipExtendedLinkSlowStarts 1.3.6.1.4.1.1588.4.1.1.14 fcipExtendedLinkSlowStarts 1.3.6.1.4.1.1588.4.1.1.14 A counter containing slow starts.
Chapter 10 iSCSI MIB Objects This chapter contains descriptions and other information specific to iSCSI MIB object types, including the following. • iSCSI MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iscsiInstanceAttributesTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iscsiNodeAttributesTable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • iscsiSessionAttributesTable . . . . . . . . . . .
10 iSCSI MIB Overview iSCSI MIB System Organization of MIB Objects Figure 72 to Figure 77 depict the high level organization of the iSCSI MIB relevant to the supported tables. Refer to RFC4544 for a description of the entire MIB.
iSCSI MIB Overview 10 - iscsiNodesAttributesEntry iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 iscsiNodeName 1.3.6.1.2.1.142.1.1.5.1.1.2 iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 iscsiNodeTransportType 1.3.6.1.2.1.142.1.1.5.1.1.5 iscsiNodeInitialR2T 1.3.6.1.2.1.142.1.1.5.1.1.6 iscsiNodeImmediateData 1.3.6.1.2.1.142.1.1.5.1.1.7 iscsiNodeMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.5.1.1.8 iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9 iscsiNodeMaxBurstLength 1.3.6.
10 iSCSI MIB Overview - iscsiSessionsStatsEntry iscsiSsnCmdPDUs 1.3.6.1.2.1.142.1.1.10.2.1.1 iscsiSsnRspPDUs 1.3.6.1.2.1.142.1.1.10.2.1.2 iscsiTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.3 iscsiRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.4 iscsiLCTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.5 iscsiLCRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.6 FIGURE 76 iscsi SessionStatsTable Hierarchy - iscsiConnectionAttributesEntry iscsiCxnIndex 1.3.6.1.2.1.142.1.1.11.1.1.1 iscsiCxnCid 1.3.6.1.2.1.142.1.1.11.1.1.2 iscsiCxnState 1.
iscsiInstanceAttributesTable 10 iscsiInstanceAttributesTable The iscsiInstanceAttributesTable is the primary table of the iSCSI MIB module. Every table entry is owned by exactly one iSCSI instance.
10 iscsiInstanceAttributesEntry iscsiInstanceAttributesEntry An isciInstanceAttributesEntry comprises the following attributes. • • • • • • • • • • • • • 1112 iscsiInstIndex 1.3.6.1.2.1.142.1.1.1.1.1 iscsiInstDescr 1.3.6.1.2.1.142.1.1.1.1.2 iscsiInstVersionMin 1.3.6.1.2.1.142.1.1.1.1.3 iscsiInstVersionMax 1.3.6.1.2.1.142.1.1.1.1.4 iscsiInstVendorID 1.3.6.1.2.1.142.1.1.1.1.5 iscsiInstVendorVersion 1.3.6.1.2.1.142.1.1.1.1.6 iscsiInstPortalNumber 1.3.6.1.2.1.142.1.1.1.1.7 iscsiInstNodeNumber 1.3.6.1.2.1.
iscsiInstIndex 1.3.6.1.2.1.142.1.1.1.1.1 10 iscsiInstIndex 1.3.6.1.2.1.142.1.1.1.1.1 An arbitrary integer that uniquely identifies a particular iSCSI instance. This index value must not be modified or reused by an agent unless a reboot has occurred. Agents should attempt to keep this value persistent across reboots.This value is not accesible.
10 iscsiInstDescr 1.3.6.1.2.1.142.1.1.1.1.2 iscsiInstDescr 1.3.6.1.2.1.142.1.1.1.1.2 A UTF-8 string to describe the iSCSI instance. Only a single instance is supported so the value will be 0. When used with mulitple iSCSI instances, it may be used in an implementation dependent manner to describe the purpose of the an instance.
iscsiInstVersionMin 1.3.6.1.2.1.142.1.1.1.1.3 10 iscsiInstVersionMin 1.3.6.1.2.1.142.1.1.1.1.3 The minimum version number of the iSCSI specification supported by this iSCSI instance. This value is hard coded to 0 in this release.
10 iscsiInstVersionMax 1.3.6.1.2.1.142.1.1.1.1.4 iscsiInstVersionMax 1.3.6.1.2.1.142.1.1.1.1.4 The maximum version number of the iSCSI specification supported by this iSCSI instance. This value is hard coded to 0 in this implementation.
iscsiInstVendorID 1.3.6.1.2.1.142.1.1.1.1.5 10 iscsiInstVendorID 1.3.6.1.2.1.142.1.1.1.1.5 A UTF-8 string describing the manufacturer of the implemention of this instance. Not supported.
10 iscsiInstVendorVersion 1.3.6.1.2.1.142.1.1.1.1.6 iscsiInstVendorVersion 1.3.6.1.2.1.142.1.1.1.1.6 A UTF-8 string set by the manufacturer describing the version of the implementation of this instance. The format of this string is determined by the manufacturer. It is for information purposes, and is not related to the iSCSI specification version numbers. It is the same as that of the fabos version.
iscsiInstPortalNumber 1.3.6.1.2.1.142.1.1.1.1.7 10 iscsiInstPortalNumber 1.3.6.1.2.1.142.1.1.1.1.7 The number of rows in the iscsiPortalAttributesTable that are currently associated with this iSCSI instance.it is hardcoded to 0.
10 iscsiInstNodeNumber 1.3.6.1.2.1.142.1.1.1.1.8 iscsiInstNodeNumber 1.3.6.1.2.1.142.1.1.1.1.8 The number of rows in the iscsiNodeAttributesTable that are currently associated with this iSCSI instance.
iscsiInstSessionNumber 1.3.6.1.2.1.142.1.1.1.1.9 10 iscsiInstSessionNumber 1.3.6.1.2.1.142.1.1.1.1.9 The number of rows in the iscsiSessionAttributesTable that are currently associated with this iSCSI instance.
10 iscsiInstSsnFailures 1.3.6.1.2.1.142.1.1.1.1.10 iscsiInstSsnFailures 1.3.6.1.2.1.142.1.1.1.1.10 The number of times a session belonging to this instance has failed. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiDiscontinuityTime. Not supported.
iscsiInstLastSsnFailureType 1.3.6.1.2.1.142.1.1.1.1.11 10 iscsiInstLastSsnFailureType 1.3.6.1.2.1.142.1.1.1.1.11 Reason for failure taken from the iscsiInstSsnErrorStatsTable. A value of 0.0 is used if the reason is not found in the table. Not supported.
10 iscsiInstLastSsnRmtNodeName 1.3.6.1.2.1.142.1.1.1.1.12 iscsiInstLastSsnRmtNodeName 1.3.6.1.2.1.142.1.1.1.1.12 The iSCSI name of the remote node from the failed session. Not supported.
iscsiInstDiscontinuityTime 1.3.6.1.2.1.142.1.1.1.1.13 10 iscsiInstDiscontinuityTime 1.3.6.1.2.1.142.1.1.1.1.13 The value of SysUpTime at the most recent occurence of a discontinuity in one or more counters used by this instance. Not supported. iscsiNodeAttributesTable This table is a list of iSCSI nodes per each iSCSI instance present on the local system.
10 iscsiNodesAttributesEntry iscsiNodesAttributesEntry An isciNodesAttributesEntry comprises the following attributes. • • • • • • • • • • • • • • • • • • 1126 iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 iscsiNodeName 1.3.6.1.2.1.142.1.1.5.1.1.2 iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 iscsiNodeTransportType 1.3.6.1.2.1.142.1.1.5.1.1.5 iscsiNodeInitialR2T 1.3.6.1.2.1.142.1.1.5.1.1.6 iscsiNodeImmediateData 1.3.6.1.2.1.142.1.1.5.1.1.
iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 10 iscsiNodeIndex 1.3.6.1.2.1.142.1.1.5.1.1.1 An arbitrary integer that uniquely identifies a particular node within an iSCSI instance. This is not accesible. This index value must not be modified or reused by an agent unless a reboot has occurred. Agents should attempt to keep this value persistent across reboots.
10 iscsiNodeName 1.3.6.1.2.1.142.1.1.5.1.1.2 iscsiNodeName 1.3.6.1.2.1.142.1.1.5.1.1.2 This node’s iSCSI name. This name is independent of the location of the node, and can be resolved into a set of addresses through various discovery services.
iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 10 iscsiNodeAlias 1.3.6.1.2.1.142.1.1.5.1.1.3 A character string that is a human-readable name or description of the iSCSI node. If configured, this alias may be communicated to the initiator ot target node at the remote end of the connection during a log in request or response. Not supported.
10 iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 iscsiNodeRoles 1.3.6.1.2.1.142.1.1.5.1.1.4 A node can operate in a target role, initiator role, or both. It is hard coded to the value target role.
iscsiNodeTransportType 1.3.6.1.2.1.142.1.1.5.1.1.5 10 iscsiNodeTransportType 1.3.6.1.2.1.142.1.1.5.1.1.5 A pointer to the corresponding row in the appropriate table for this SCSI transport. This pointer is used by management stations to locatethe SCSI-level device represented by this iSCSI node. Not supported.
10 iscsiNodeInitialR2T 1.3.6.1.2.1.142.1.1.5.1.1.6 iscsiNodeInitialR2T 1.3.6.1.2.1.142.1.1.5.1.1.6 An object that indicates the InitialR2T preference for this node. When implemented, true=YES, false=will try to negotiate NO, but will accept YES. Not supported.
iscsiNodeImmediateData 1.3.6.1.2.1.142.1.1.5.1.1.7 10 iscsiNodeImmediateData 1.3.6.1.2.1.142.1.1.5.1.1.7 An object that indicates the ImmediateData preference for this node. When implemented, true=YES, but will accept NO, false=NO. Not supported.
10 iscsiNodeMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.5.1.1.8 iscsiNodeMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.5.1.1.8 The maximum number of outstanding requests to transmit (R2Ts) allowed per iSCSI task. Not supported.
iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9 10 iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9 The maximum length in bytes supported for unsolicited data to/from this node. Not supported.
10 iscsiNodeMaxBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.10 iscsiNodeMaxBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.10 The maximum number of bytes that can be sent within a single sequence of data-in or data-out PDUs. Not supported.
iscsiNodeMaxConnections 1.3.6.1.2.1.142.1.1.5.1.1.11 10 iscsiNodeMaxConnections 1.3.6.1.2.1.142.1.1.5.1.1.11 The maximum number of connections allowed in each session to and/or from this node. Supported. Hard coded to 2.
10 iscsiNodeDataSequenceInOrder 1.3.6.1.2.1.142.1.1.5.1.1.12 iscsiNodeDataSequenceInOrder 1.3.6.1.2.1.142.1.1.5.1.1.12 The preference for the order of transfer for iSCSI data PDU sequences. False (NO) indicates that PDU sequences may be transferred in any order. True (YES) indicates that data PDU sequences must be transferred using continuously increasing offsets, except during error recovery. Not supported.
iscsiNodeDataPDUInOrder 1.3.6.1.2.1.142.1.1.5.1.1.13 10 iscsiNodeDataPDUInOrder 1.3.6.1.2.1.142.1.1.5.1.1.13 The preference for the order of iSCSI data PDUs within iSCSI data PDU sequences. False (NO) indicates that data PDUs may be transferred in any order within a sequence. True (YES) indicates that data PDUs must be transferred using continuously increasing addresses within a sequence, with no gaps or overlay between PDUs. Not supported.
10 iscsiNodeDefaultTime2Wait 1.3.6.1.2.1.142.1.1.5.1.1.14 iscsiNodeDefaultTime2Wait 1.3.6.1.2.1.142.1.1.5.1.1.14 The minimum time, in seconds, to wait before attempting an explicit/implicit logout or active iSCSI task reassignment after an unexpected connection termination or a connection reset. Not supported.
iscsiNodeDefaultTime2Retain 1.3.6.1.2.1.142.1.1.5.1.1.15 10 iscsiNodeDefaultTime2Retain 1.3.6.1.2.1.142.1.1.5.1.1.15 The minimum time, in seconds, to wait, after an initial wait (Time2Wait), for a possible active iSCSI task reassignment after an unexpected connection termination or a connection reset. Not supported.
10 iscsiNodeErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.5.1.1.16 iscsiNodeErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.5.1.1.16 The Error Recovery Level preference of this node. Not supported.
iscsiNodeDiscontinuityTime 1.3.6.1.2.1.142.1.1.5.1.1.17 10 iscsiNodeDiscontinuityTime 1.3.6.1.2.1.142.1.1.5.1.1.17 The value of SysUpTime at the most recent occurence of a discontinuity in one or more counters used by this node. Not supported.
10 iscsiNodeStorageType 1.3.6.1.2.1.142.1.1.5.1.1.18 iscsiNodeStorageType 1.3.6.1.2.1.142.1.1.5.1.1.18 The storage type for all read-write objects within this row. Rows in this table are are always created by an external process, and may have a storage type od readOnly or permanent. The value of this variable is readOnly for this release.
iscsiSessionAttributesTable 10 iscsiSessionAttributesTable The isciSessionAttributesTable contains a set of rows that list the sessions known to exist locally for each node in the iSCSI instance. This table contains session negotiable parameters, the target name, the initiator name, the tsid, and the isid.
10 iscsiSessionsAttributesEntry iscsiSessionsAttributesEntry An iscsiSessionsAttributesEntry comprises the following attributes. • • • • • • • • • • • • • • • • • • • • • 1146 iscsiSsnNodeIndex 1.3.6.1.2.1.142.1.1.10.1.1.1 iscsiSsnIndex 1.3.6.1.2.1.142.1.1.10.1.1.2 iscsiSsnDirection 1.3.6.1.2.1.142.1.1.10.1.1.3 iscsiSsnInitiatorName 1.3.6.1.2.1.142.1.1.10.1.1.4 iscsiSsnTargetName 1.3.6.1.2.1.142.1.1.10.1.1.5 iscsiSsnTSIH 1.3.6.1.2.1.142.1.1.10.1.1.6 iscsiSsnISID 1.3.6.1.2.1.142.1.1.10.1.1.
iscsiSsnNodeIndex 1.3.6.1.2.1.142.1.1.10.1.1.1 10 iscsiSsnNodeIndex 1.3.6.1.2.1.142.1.1.10.1.1.1 An arbitrary integer that uniquely identifies a particular node within an iSCSI instance present on the local system. This value is not accesible.For normal, non-discovery sessions, this value will mapto the isciNodeIndex. For discovery sessions that do not have a node associated, the value 0 (zero) is used.
10 iscsiSsnIndex 1.3.6.1.2.1.142.1.1.10.1.1.2 iscsiSsnIndex 1.3.6.1.2.1.142.1.1.10.1.1.2 An arbitrary integer that uniquely identifies a particular node within an iSCSI instance present on the local system. This value is not accesible.This index value must not be modified or reused by an agent unless a reboot has occurred. Agents should attempt to keep this value persistent across reboots.
iscsiSsnDirection 1.3.6.1.2.1.142.1.1.10.1.1.3 10 iscsiSsnDirection 1.3.6.1.2.1.142.1.1.10.1.1.3 Indicates the direction of the iSCSI session. • inboundSession - The session is established from an external initiator to a target within the iSCSI instance. • outboundSession - The session is established from an intitiator within this iSCSI instance to an external target. For this release, the value of iSCSISsnDirection is always inboundSession.
10 iscsiSsnInitiatorName 1.3.6.1.2.1.142.1.1.10.1.1.4 iscsiSsnInitiatorName 1.3.6.1.2.1.142.1.1.10.1.1.4 If iscsiSsnDirection is Inbound, this object is a UTF-8 string that contains the name of the remote initiator. If this session is a discovery session that does not specify a particular initiator, this object contains a zero-length string. If iscsiSsnDirection is Outbound, this object contains a zero-length string.
iscsiSsnTargetName 1.3.6.1.2.1.142.1.1.10.1.1.5 10 iscsiSsnTargetName 1.3.6.1.2.1.142.1.1.10.1.1.5 If iscsiSsnDirection is Outbound, this object is a UTF-8 string that contains the name of the remote target. If this session is a discovery session that does not specify a particular target, this object contains a zero-length string. If scsiSsnDirection is Inbound, this object contains a zero-length string.
10 iscsiSsnTSIH 1.3.6.1.2.1.142.1.1.10.1.1.6 iscsiSsnTSIH 1.3.6.1.2.1.142.1.1.10.1.1.6 The target-defined handle for this session.
iscsiSsnISID 1.3.6.1.2.1.142.1.1.10.1.1.7 10 iscsiSsnISID 1.3.6.1.2.1.142.1.1.10.1.1.7 The initiator-defined portion of the iSCSI session ID.
10 iscsiSsnInitiatorAlias 1.3.6.1.2.1.142.1.1.10.1.1.8 iscsiSsnInitiatorAlias 1.3.6.1.2.1.142.1.1.10.1.1.8 A UTF-8 string that gives the alias communicated by the initiator end of the session during the log in phase. If no alias exists, the value is a zero-length string.
iscsiSsnTargetAlias 1.3.6.1.2.1.142.1.1.10.1.1.9 10 iscsiSsnTargetAlias 1.3.6.1.2.1.142.1.1.10.1.1.9 A UTF-8 string that gives the alias communicated by the target end of the session during the log in phase If no alias exists, the value is a zero-length string.
10 iscsiSsnInitialR2T 1.3.6.1.2.1.142.1.1.10.1.1.10 iscsiSsnInitialR2T 1.3.6.1.2.1.142.1.1.10.1.1.10 If set to true, indicates that the initiator must wait for an R2T before sending to the target. If set to false, the initiator may send data immediately, within limits set by iscsiSsnFirstBurstLength and the expected data transfer length of the request.
iscsiSsnImmediateData 1.3.6.1.2.1.142.1.1.10.1.1.11 10 iscsiSsnImmediateData 1.3.6.1.2.1.142.1.1.10.1.1.11 Indicates whether the initiator and target have agreed to support immediate data on this session.
10 iscsiSsnType 1.3.6.1.2.1.142.1.1.10.1.1.12 iscsiSsnType 1.3.6.1.2.1.142.1.1.10.1.1.12 Type of iSCSI session: • normalSession - session is a normal ISCSI session. • discoverySession - session is being used only for discovery.
iscsiSsnMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.10.1.1.13 10 iscsiSsnMaxOutstandingR2T 1.3.6.1.2.1.142.1.1.10.1.1.13 The maximum number of outstanding requests-to-transmit (R2Ts) per iSCSI task within this session.
10 iscsiSsnFirstBurstLength 1.3.6.1.2.1.142.1.1.10.1.1.14 iscsiSsnFirstBurstLength 1.3.6.1.2.1.142.1.1.10.1.1.14 The maximum length supported for unsolicited data sent within this session.
iscsiSsnMaxBurstLength 1.3.6.1.2.1.142.1.1.10.1.1.15 10 iscsiSsnMaxBurstLength 1.3.6.1.2.1.142.1.1.10.1.1.15 The maximum number of bytes that can be sent within a single sequence of Data-In or Data-Out PDUs.
10 iscsiSsnConnectionNumber 1.3.6.1.2.1.142.1.1.10.1.1.16 iscsiSsnConnectionNumber 1.3.6.1.2.1.142.1.1.10.1.1.16 The number of transport protocol connections that currently belong to this session.
iscsiSsnAuthIdentity 1.3.6.1.2.1.142.1.1.10.1.1.17 10 iscsiSsnAuthIdentity 1.3.6.1.2.1.142.1.1.10.1.1.17 This object contains a pointer to a row in the IPS-AUTH MIB module that identifies the authentication method being used on this session, as communicated during the log in phase.
10 iscsiSsnDataSequenceInOrder 1.3.6.1.2.1.142.1.1.10.1.1.18 iscsiSsnDataSequenceInOrder 1.3.6.1.2.1.142.1.1.10.1.1.18 False indicates that iSCSI data PDU sequences may be transferred in any order. True indicates that data PDU sequences must be transferred using continuously increasing offsets, except during error recovery.The default value for this is True.
iscsiSsnDataPDUInOrder 1.3.6.1.2.1.142.1.1.10.1.1.19 10 iscsiSsnDataPDUInOrder 1.3.6.1.2.1.142.1.1.10.1.1.19 False indicates that iSCSI data PDUs within sequences may be in any order. True Indicates that data PDUs within sequences must be at continuously increasing addresses, with no gaps or overlay between PDUs. Default is true.
10 iscsiSsnErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.10.1.1.20 iscsiSsnErrorRecoveryLevel 1.3.6.1.2.1.142.1.1.10.1.1.20 The level of error recovery negotiated between the initiator and the target. Higher numbers represent more detailed recovery schemes.
iscsiSsnErrorDiscontinuityTime 1.3.6.1.2.1.142.1.1.10.1.1.21 10 iscsiSsnErrorDiscontinuityTime 1.3.6.1.2.1.142.1.1.10.1.1.21 The value of SysUpTime on the most recent occasion at which any one or more of this session's counters suffered a discontinuity. When a session is established, and this object is created, it is initialized to the current value of SysUpTime. Not supported.
10 iscsiSessionStatsTable iscsiSessionStatsTable The isciSessionStatsTable contains performance statistics based on iSCI data bytes and PDUs.
iscsiSessionsStatsEntry 10 iscsiSessionsStatsEntry An iscsiSessionsStatsEntry comprises the following attributes. • • • • • • Fabric OS MIB Reference 53-1001156-01 iscsiSsnCmdPDUs 1.3.6.1.2.1.142.1.1.10.2.1.1 iscsiSsnRspPDUs 1.3.6.1.2.1.142.1.1.10.2.1.2 iscsiTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.3 iscsiRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.4 iscsiLCTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.5 iscsiLCRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.
10 iscsiSsnCmdPDUs 1.3.6.1.2.1.142.1.1.10.2.1.1 iscsiSsnCmdPDUs 1.3.6.1.2.1.142.1.1.10.2.1.1 The count of command PDUs transferred on this session. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime.
iscsiSsnRspPDUs 1.3.6.1.2.1.142.1.1.10.2.1.2 10 iscsiSsnRspPDUs 1.3.6.1.2.1.142.1.1.10.2.1.2 The count of response PDUs transferred on this session. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime.
10 iscsiTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.3 iscsiTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.3 The count of data octets that were transmitted by the local iSCSI node on this session. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime.
iscsiRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.4 10 iscsiRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.4 The count of data octets that were received by the local iSCSI node on this session. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime.
10 iscsiLCTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.5 iscsiLCTxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.5 A Low Capacity shadow object of iscsiSsnTxDataOctets for those systems that don't support Counter64. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime. Not supported.
iscsiLCRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.6 10 iscsiLCRxDataOctets 1.3.6.1.2.1.142.1.1.10.2.1.6 A Low Capacity shadow object of iscsiSsnRxDataOctets for those systems that don't support Counter64. If this counter has suffered a discontinuity, the time of the last discontinuity is indicated in iscsiSsnDiscontinuityTime. Not supported.
10 iscsiConnectionAttributesTable iscsiConnectionAttributesTable The isciConnectionAttributesTable contains a list of active connections within each session.
iscsiConnectionAttributesEntry 10 iscsiConnectionAttributesEntry An iscsiConnectionAttributesEntry comprises the following attributes. • • • • • • • • • • • • • • • • Fabric OS MIB Reference 53-1001156-01 iscsiCxnIndex 1.3.6.1.2.1.142.1.1.11.1.1.1 iscsiCxnCid 1.3.6.1.2.1.142.1.1.11.1.1.2 iscsiCxnState 1.3.6.1.2.1.142.1.1.11.1.1.3 iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4 iscsiCxnLocalAddr 1.3.6.1.2.1.142.1.1.11.1.1.5 iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6 iscsiCxnLocalPort 1.3.6.1.2.1.142.1.
10 iscsiCxnIndex 1.3.6.1.2.1.142.1.1.11.1.1.1 iscsiCxnIndex 1.3.6.1.2.1.142.1.1.11.1.1.1 An arbitrary integer that uniquely identifies a particular node within an iSCSI instance present on the local system. This value is not accesible. This index value must not be modified or reused by an agent unless a reboot has occurred. Agents should attempt to keep this value persistent across reboots.
iscsiCxnCid 1.3.6.1.2.1.142.1.1.11.1.1.2 10 iscsiCxnCid 1.3.6.1.2.1.142.1.1.11.1.1.2 The ISCSI connection ID for this connection.
10 iscsiCxnState 1.3.6.1.2.1.142.1.1.11.1.1.3 iscsiCxnState 1.3.6.1.2.1.142.1.1.11.1.1.3 The current state of this connection, from an iSCSI negotiation point of view. Here are the states. • login - The transport protocol connection has been established, but a valid iSCSI login response with the final bit set has not been sent or received. • full - A valid iSCSI login response with the final bit set has been sent or received.
iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4 10 iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4 The type of Internet Network Addresses contained in the corresponding instances of iscsiCxnLocalAddr and iscsiCxnRemoteAddr. The value 'dns' is not allowed.iscsiCxnAddrType is hard coded to the value ipv4.
10 iscsiCxnLocalAddr 1.3.6.1.2.1.142.1.1.11.1.1.5 iscsiCxnLocalAddr 1.3.6.1.2.1.142.1.1.11.1.1.5 The local Internet Network Address, of the type specified by iscsiCxnAddrType, used by this connection.
iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6 10 iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6 The transport protocol over which this connection is running. This is hard coded to tcp (6).
10 iscsiCxnLocalPort 1.3.6.1.2.1.142.1.1.11.1.1.7 iscsiCxnLocalPort 1.3.6.1.2.1.142.1.1.11.1.1.7 The local transport protocol port used by this connection. This object cannot have the value zero, since it represents an established connection.
iscsiCxnRemoteAddr 1.3.6.1.2.1.142.1.1.11.1.1.8 10 iscsiCxnRemoteAddr 1.3.6.1.2.1.142.1.1.11.1.1.8 The remote Internet Network Address, of the type specified by iscsiCxnAddrType, used by this connection. Only IPv4 addresses are supported.
10 iscsiCxnRemotePort 1.3.6.1.2.1.142.1.1.11.1.1.9 iscsiCxnRemotePort 1.3.6.1.2.1.142.1.1.11.1.1.9 The remote transport protocol port used by this connection. This object cannot have the value zero, since it represents an established connection.
iscsiCxnMaxRecvDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.10 10 iscsiCxnMaxRecvDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.10 The maximum data payload size supported for command or data PDUs able to be received on this connection.
10 iscsiCxnMaxXmitDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.11 iscsiCxnMaxXmitDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.11 The maximum data payload size supported for command or data PDUs able to be sent on this connection.
iscsiCxnHeaderIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.12 10 iscsiCxnHeaderIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.12 This object identifies the iSCSI header digest scheme in use within this connection.
10 iscsiCxnDataIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.13 iscsiCxnDataIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.13 This object identifies the iSCSI data digest scheme in use within this connection.
iscsiCxnRecvMarker 1.3.6.1.2.1.142.1.1.11.1.1.14 10 iscsiCxnRecvMarker 1.3.6.1.2.1.142.1.1.11.1.1.14 This object identifies whether or not this connection is receiving markers in its incoming data stream. Hard coded to false.
10 iscsiCxnSendMarker 1.3.6.1.2.1.142.1.1.11.1.1.15 iscsiCxnSendMarker 1.3.6.1.2.1.142.1.1.11.1.1.15 This object identifies whether or not this connection is inserting markers in its outgoing data stream. Hardcoded to false.
iscsiCxnVersionActive 1.3.6.1.2.1.142.1.1.11.1.1.16 10 iscsiCxnVersionActive 1.3.6.1.2.1.142.1.1.11.1.1.16 Active version number of the SCSI specification negotiated on this connection. Hardcoded to 0.
10 1194 iscsiCxnVersionActive 1.3.6.1.2.1.142.1.1.11.1.1.
Appendix A MIB Object Groupings This appendix provides a function-based listing of MIB objects. To refer to the correlation of various switch objects to MIB objects, including the following. • Switch Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Sensor Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Port Variables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A Event Variables • fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 . . . . . . . . . . . . . . . . . . . . . . . . . . • Fx_Port Physical Level Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . • fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . • Fibre Channel Port Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255 261 325 598 Variables for Statistics and Measurement • Statistics Group . . . . . . .
iSCSI Instance Information Variables A iSCSI Instance Information Variables MIB variables that assist in gathering information about iSCSI instances are in the following tables. • iscsiInstanceAttributesTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1111 • iscsiNodeAttributesTable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1125 • iscsiSessionStatsTable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A 1198 iSCSI Instance Information Variables Fabric OS MIB Reference 53-1001156-01
Appendix B MIB OIDs and Their Matching Object Names This appendix provides a listing of the MIB object names and the corresponding MIB Object ID (OID) associated with each. MIB OIDs The following matrix allows you to identify a MIB object name according to its related OID. TABLE 24 Fabric OS MIB Reference 53-1001156-01 MIB Object Name/OID Matrix MIB Object Name OID Page No. iso 1 page 221 org 1.3 page 221 dod 1.3.6 page 221 internet 1.3.6.1 page 221 directory 1.3.6.1.
B MIB OIDs TABLE 24 1200 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1 page 241 fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2 page 242 fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 page 243 fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.4 page 244 fcFxPortBbCredit 1.3.6.1.2.1.75.1.1.5.1.5 page 245 fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 page 246 fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 page 247 fcFxPortEdtov 1.3.6.1.2.1.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1001156-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortClass2SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.8 page 278 fcFxPortClass3SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.9 page 279 fcFxPortNxPortName 1.3.6.1.2.1.75.1.2.3.1.10 page 280 fcFxPortConnectedNxPort 1.3.6.1.2.1.75.1.2.3.1.11 page 281 fcFxPortBbCreditModel 1.3.6.1.2.1.75.1.2.3.1.12 page 282 fcFeError 1.3.6.1.2.1.75.1.3 page 282 fcFxPortErrorTable 1.3.6.
B MIB OIDs TABLE 24 1202 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortC2OutFrames 1.3.6.1.2.1.75.1.4.2.1.2 page 312 fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3 page 313 fcFxPortC2OutOctets 1.3.6.1.2.1.75.1.4.2.1.4 page 314 fcFxPortC2Discards 1.3.6.1.2.1.75.1.4.2.1.5 page 315 fcFxPortC2FbsyFrames 1.3.6.1.2.1.75.1.4.2.1.6 page 316 fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7 page 317 fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1001156-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFeErrorGroup 1.3.6.1.2.1.75.2.2.3 fcFeClass1AccountingGroup 1.3.6.1.2.1.75.2.2.4 fcFeClass2AccountingGroup 1.3.6.1.2.1.75.2.2.5 fcFeClass3AccountingGroup 1.3.6.1.2.1.75.2.2.6 fcFeCapabilitiesGroup 1.3.6.1.2.1.75.2.2.7 experimental 1.3.6.1.3 page 341 fibreChannel 1.3.6.1.3.42 page 341 fcFabric 1.3.6.1.3.42.2 page 341 fcFe 1.3.6.1.3.42.2.
B MIB OIDs TABLE 24 1204 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13 page 376 fcFxPortClass3SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.14 page 377 fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.15 page 378 fcFxPortBaudRate 1.3.6.1.3.42.2.1.1.5.1.16 page 379 fcFxPortMedium 1.3.6.1.3.42.2.1.1.5.1.17 page 380 fcFxPortTxType 1.3.6.1.3.42.2.1.1.5.1.18 page 381 fcFxPortDistance 1.3.6.1.3.42.2.1.1.5.1.19 page 382 fcFeOp 1.3.6.1.3.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1001156-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortStackedConnModeAgreed 1.3.6.1.3.42.2.1.2.4.1.9 page 412 fcFxPortClass2SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.10 page 413 fcFxPortClass3SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.11 page 414 fcFxPortNxPortName 1.3.6.1.3.42.2.1.2.4.1.12 page 415 fcFxPortConnectedNxPort 1.3.6.1.3.42.2.1.2.4.1.13 page 416 fcFxPortBbCreditModel 1.3.6.1.3.42.2.1.2.4.1.
B MIB OIDs TABLE 24 1206 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcFxPortCapIntermix 1.3.6.1.3.42.2.1.5.1.1.10 page 445 fcFxPortCapStackedConnMode 1.3.6.1.3.42.2.1.5.1.1.11 page 446 fcFxPortCapClass2SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.12 page 447 fcFxPortCapClass3SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.13 page 448 fcFxPortCapHoldTimeMax 1.3.6.1.3.42.2.1.5.1.1.14 page 449 fcFxPortCapHoldTimeMin 1.3.6.1.3.42.2.1.5.1.1.15 page 450 fcFxPortCapBaudRates 1.3.6.1.3.42.2.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1001156-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitContact 1.3.6.1.3.94.1.6.1.23 page 908 connUnitLocation 1.3.6.1.3.94.1.6.1.24 page 909 connUnitEventFilter 1.3.6.1.3.94.1.6.1.25 page 910 connUnitNumEvents 1.3.6.1.3.94.1.6.1.26 page 911 connUnitMaxEvents 1.3.6.1.3.94.1.6.1.27 page 912 connUnitEventCurrID 1.3.6.1.3.94.1.6.1.28 page 913 connUnitRevsTable 1.3.6.1.3.94.1.
B MIB OIDs TABLE 24 1208 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitPortRevision 1.3.6.1.3.94.1.10.1.13 page 944 connUnitPortVendor 1.3.6.1.3.94.1.10.1.14 page 945 connUnitPortSpeed 1.3.6.1.3.94.1.10.1.15 page 946 connUnitPortControl 1.3.6.1.3.94.1.10.1.16 page 947 connUnitPortName 1.3.6.1.3.94.1.10.1.17 page 949 connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18 page 950 connUnitPortStatObject 1.3.6.1.3.94.1.10.1.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1001156-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 page 981 connUnitLinkCurrIndex 1.3.6.1.3.94.1.12.1.14 page 982 trapReg 1.3.6.1.3.94.2 page 1055 trapMaxClients 1.3.6.1.3.94.2.1 page 1053 trapClientCount 1.3.6.1.3.94.2.2 page 1054 trapRegTable 1.3.6.1.3.94.2.3 page 1055 trapRegEntry 1.3.6.1.3.94.2.3.1 page 1056 trapRegIpAddress 1.3.6.1.3.94.2.3.1.
B MIB OIDs TABLE 24 1210 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitPortStatCountClass2FBSYFrames 1.3.6.1.3.94.4.5.1.22 page 1006 connUnitPortStatCountClass2PBSYFrames 1.3.6.1.3.94.4.5.1.23 page 1007 connUnitPortStatCountClass2FRJTFrames 1.3.6.1.3.94.4.5.1.24 page 1008 connUnitPortStatCountClass2PRJTFrames 1.3.6.1.3.94.4.5.1.25 page 1009 connUnitPortStatCountClass3RxFrames 1.3.6.1.3.94.4.5.1.26 page 1010 connUnitPortStatCountClass3TxFrames 1.3.6.1.3.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1001156-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 page 1038 connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 page 1039 connUnitSnsPortIdentifier 1.3.6.1.3.94.5.2.1.1.3 page 1040 connUnitSnsPortName 1.3.6.1.3.94.5.2.1.1.4 page 1041 connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.5 page 1042 connUnitSnsClassOfSvc 1.3.6.1.3.94.5.2.1.1.6 page 1043 connUnitSnsNodeIPAddress 1.3.6.1.3.94.
B MIB OIDs TABLE 24 1212 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14 page 545 swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 page 546 swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 page 547 swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.18 page 548 swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 page 549 swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 page 550 swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1001156-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3 page 597 swFCport 1.3.6.1.4.1.1588.2.1.1.1.6 page 598 swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 page 599 swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 page 601 swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 page 602 swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 page 603 swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.
B MIB OIDs TABLE 24 1214 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFCPortSpeed 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 page 634 swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 page 635 swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 page 636 swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 page 637 swFCPortBrcdType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 page 638 swNs 1.3.6.1.4.1.1588.2.1.1.1.7 page 635 swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1001156-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 page 669 swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 page 670 swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 page 671 swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 page 672 swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 page 673 swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.
B MIB OIDs TABLE 24 1216 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8 page 706 swFwLastState 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9 page 707 swFwBehaviorType 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.10 page 708 swFwBehaviorInt 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.11 page 709 swEndDevice 1.3.6.1.4.1.1588.2.1.1.1.21 page 711 swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 page 711 swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1001156-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3 page 751 swBlmPerfFltAlias 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4 page 752 swID 1.3.6.1.1.1588.2.1.1.1.1.24 page 560 swEtherIPAddress 1.3.6.1.1.1588.2.1.1.1.1.25 page 561 swEtherIPMask 1.3.6.1.1.1588.2.1.1.1.1.26 page 562 swFCIPAddress 1.3.6.1.1.1588.2.1.1.1.1.27 page 563 swFCIPMask 1.3.6.1.1.1588.2.1.1.1.1.
B MIB OIDs TABLE 24 1218 MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 page 755 swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 page 756 swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 page 757 swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 page 758 swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 page 759 swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 page 760 swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.
MIB OIDs TABLE 24 Fabric OS MIB Reference 53-1001156-01 B MIB Object Name/OID Matrix (Continued) MIB Object Name OID Page No. fcipLinkStatus 1.3.6.1.2.1.224.1.1.5.1.11 page 1068 fcipLinkCreateTime 1.3.6.1.2.1.224.1.1.5.1.12 page 1068 fcipExtendedLinkEntry 1.3.6.1.4.1.1588.4.1.1 page 1069 fcipExtendedLinkIfIndex 1.3.6.1.4.1.1588.4.1.1.1 page 1093 fcipExtendedLinkTcpRetransmits 1.3.6.1.4.1.1588.4.1.1.2 page 1094 fcipExtendedLinkTcpDropped Packets 1.3.6.1.4.1.1588.4.1.1.
B 1220 MIB OIDs Fabric OS MIB Reference 53-1001156-01
Index A E accounting group, 296, 433 address translation group, 55 agtcfgDefault command, 12 agtcfgSet command, 12 agtcfgShow command, 12 ASIC performance monitoring group, 732 EGP group, 168 end device group, 711 Entity MIB conformance information, 502 Entity MIB objects, 459 Entity MIB overview, 453 Entity MIB system organization of MIB objects, 454 Entity MIB trap, 501 error group, 282, 417 errShow command, 4 event group, 656 event variables, 1196 B before loading MIBs, 6 Brocade MIB files, 6 C cap
H ha MIB overview, 775 ha-MIB traps, 803 ha-MIB traps and sample triggers, 806 high-availability group, 777 port variables, 1195 R revision number scalar, 1061 I S ICMP group, 110 interfaces group, 29 interfaces table, 31 IP group, 61 iSCSI, 1107, 1108 iSCSI MIB Organization, 1068, 1108 iSCSI MIB Overview, 1067, 1107 ISL and end device variables, 1196 sensor variables, 1195 sensorShow command, 11 Series 3000 Variables, 1196, 1197 service group, 1034 SNMP configuration variables, 1196 SNMP group, 168 S
understanding SNMP bASICs, 2 unsupported tables, 1061 unsupported traps, 1062 Fabric OS MIB Reference 53-1001156-01 1223
1224 Fabric OS MIB Reference 53-1001156-01
