EZSwitchSetup Administrator's Guide v6.4.0 (53-1001344-03, June 2010)

46 EZSwitchSetup Administrators Guide
53-1001344-03
Accessing Web Tools for advanced management
3
Accessing Web Tools for advanced management
From the Switch Manager, you can launch Web Tools, which provides more extensive switch
management functions for more experienced users. See the Web Tools Administrator’s Guide for
information on the Web Tools interface.
To launch Web Tools, ensure that you have completed all Switch Manager tasks and then click
Advanced Management in the Miscellaneous category of the task panel. The Switch Manager
session will be closed. Any editing in Switch Manager that has not been applied is lost.
After entering Web Tools, you must re-log in to manage the switch.
You cannot return to EZSwitchSetup Switch Manager unless you close and reopen your browser
window and relaunch EZSwitchSetup.
Making EZSwitchSetup your default switch manager
If you want to be sure that the EZSwitchSetup Manager is launched as the default switch
management program from your web browser instead of Web Tools, do the following.
1. Log in to the switch.
2. Use the configure command to check Web Tools attributes by typing yes or y to display Web
Tools attributes, as in the following example.
switch:admin> configure
Not all options will be available on an enabled switch.
To disable the switch, use the "switchDisable" command.
Configure...
System services (yes, y, no, n): [no]
ssl attributes (yes, y, no, n): [no]
rpcd attributes (yes, y, no, n): [no]
webtools attributes (yes, y, no, n): [no] y
Web Tools attributes are displayed.
3. Type yes or y for the Basic User Enabled attribute to make the EZSwitchSetup Manager start by
default from your web browser rather than Web Tools, as in the following example.
Basic User Enabled (yes, y, no, n): [yes] y
If no or n is specified, Web Tools is launched. Note that no is the default value.