HP StorageWorks Fabric OS 6.3.3d Release Notes (5697-0493, May 2010 - includes all 6.3.0x versions)

Fixed in Fabric OS 6.3.0
pending merge: fail to recover data with error: ERROR, SYS, FPGA
timeout, DECRYPT_DECOMPRESS_TIMEOUT : Cmd 0x932b4000.
Fixed in Fabric OS 6.3.0
FICON XRC times out on 400 multiprotocol router to DC SAN Director.
Fixed in Fabric OS 6.3.0
Need more info in configuration upload/download process.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Toggle (enable / disable) all disabled
ports in order to restart SFP polling.
Sfpshow displays incorrect values for current, RX power, and TX
power.
Fixed in Fabric OS 6.3.0
After user configured key ID without commit, CAL doesn't return key
ID value.
Fixed in Fabric OS 6.3.0
Auditcfg does not generate RBAC permission denied messages.
Fixed in Fabric OS 6.3.0
4Gb SAN Switch for c-Class BladeSystem puts out frequent warning
messsages (HIL-1505) that the temperature is above the threshold.
Fixed in Fabric OS 6.3.0
IROUNDUP failure when channel running local to DC04 SAN Director
CUP.
Fixed in Fabric OS 6.3.0
Need to add two more values for SNMP port state that includes "val-
idating (10)" module is being validated and "invalidModule (11)"
module is invalid.
Fixed in Fabric OS 6.3.0
WWN mapping for certain storage systems is incorrect.
Fixed in Fabric OS 6.3.0
RTWR max retries exhausted on DC04 SAN Director after stress test
with POST enabled.
Fixed in Fabric OS 6.3.0
If rekey process are started when a physical target of the backup EE
is offline, failover to that backup EE might not be possible even that
physical target is brought back online later on.
Fixed in Fabric OS 6.3.0
Passive path LUN gets stuck in not ready (Get key from archive) state.
Fixed in Fabric OS 6.3.0
Group leader node create a different key id for the dual path LUN
after a configdownload.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
De-register the secondary KV first.
Unable to de-register primary key vault when both primary and sec-
ondary key valuts are registered.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Delete container that aborts rekey and
re-start rekey on the container that
doesn't have any kind of reservation
conflict.
Re-keying of LUNs for a VMware host are not completing successfully.
Fixed in Fabric OS 6.3.0
In a 4-node Cluster rekey doesn't resume after slot poweron.
66