HP StorageWorks SAN Director Installation Guide (A7393-90009, May 2007)

SAN Director installation guide 119
8. Type firmwareDownload -s to download the firmware to only one of the CP cards. Enter all
requested information (use default values):
9. Type firmwareDownloadStatus to verify that the firmware downloaded successfully.
10. Type haEnable command to reenable HA on the active CP card.
11. Type reboot.
12. Verify that the reboot is complete and the CP cards have achieved failover redundancy:
a. Wait until the status LEDs on both CP cards are not lit.
b. Type haShow and verify that the command output includes HA Enabled Heartbeat Up.
If not, wait a minute and re-enter the command, until you have verified that redundancy is
achieved.
13. Type firmwareShow to verify that the firmware version is dated.
14. Pack the old CP card in the packaging provided with the new CP card, and contact HP to
determine the return procedure.
swDir:admin> firmwaredownload -s
Server Name or IP Address: 192.168.100.1
User Name: user
File Name: /software/v5.2.0/release.plist
Password: ********
Do Auto-Commit after Reboot [Y]:
Reboot system after download [N]:
Firmwaredownload has started.
2005/03/07-14:59:21, [SULB-1001], 923,, WARNING, SilkWorm 48000,
Firmwaredownload command has started.
Start to install packages......
dir ##################################################
ldconfig ##################################################
glibc ##################################################
bash ##################################################
readline ##################################################
terminfo ##################################################
termcap ##################################################
setup ##################################################
<output truncated>
tz ##################################################
mtracer-tool ##################################################
lkcd ##################################################
sysstat ##################################################
Removing unneeded files, please wait ...
Finished removing unneeded files.
All packages have been downloaded successfully.
Firmwaredownload has completed successfully.
2005/03/07-15:05:56, [SULB-1002], 924,, INFO, SilkWorm 48000, Firmwaredownload
command has completed successfully.