HP StorageWorks SAN Director Installation Guide (A7393-90009, May 2007)

SAN Director installation guide 175
3. Resolve any issues or unintentional changes to the 4/256 SAN Director or fabric.
• If there are any mechanical problems, try reseating the associated component.
• If the configuration information is not correct for the 4/256 SAN Director, modify as
required. If necessary, the configuration saved before the replacement can be downloaded
using the configDownload command.
The configDownload command can be entered through a telnet or serial session, but the
4/256 SAN Director must have an Ethernet connection to the server name or IP of the host
for the download process to complete. For more information, refer to the help
configdownload command or the Fabric OS command reference manual.
• If other issues exist, contact HP.
4. If required, package the faulty chassis for return to HP.
CAUTION: If the old chassis is returned to HP, ensure that the packaging is strong enough to
contain the chassis and is securely fastened. If the cardboard packaging is used, you must use
banding equipment to enclose the package with a minimum of two bands around the entire
package.
swDir:admin> configdownload
Server Name or IP Address [host]: 123.123.123.123
User Name [None]: Admin24
File Name [config.txt]: config-switch.txt
Password: xxxxxxxx
download complete
swDir:admin>