HP StorageWorks SAN Director Installation Guide (A7393-90009, May 2007)

Overview22
• Eight Fibre Channel SFP ports supporting link speeds of 1, 2, or 4 Gbit/sec
—Support distances up to 100 m over Category 5e and Category 6 copper cabling
—The cable must contain four twisted copper wire pairs
—Support 1-Gbit/sec operation
—Support external electrical loopback plug
NOTE: After POST completes, the firmware version on the B-Series iSCSI Director Blade will
autolevel with the firmware version on the active CP. The port blade must operate with Fabric OS
5.2.1b or higher; or faults.