HP StorageWorks SAN Director Installation Guide (A7393-90009, May 2007)

Installing and configuring the 4/256 SAN Director46

Figure 6 Installing the left and right rack mount shelf brackets

7. Tighten the screws to a torque of 80-inch pounds.

8. Repeat step 5 through step 7 to install the right rack mount shelf bracket.

NOTE: When finished securing the rack mount shelf brackets, remember to tighten the adjustment

screws you loosened in step 3, and torque to 32 inch-pounds.

1 Left rack mount shelf bracket

2 Adjusting screws

3 Right rack mount shelf bracket

4 1/4-20 x .500-inch screws and

washers (6)

SHR-2509