HP StorageWorks SAN Director Installation Guide (A7393-90009, May 2007)

Installing and configuring the 4/256 SAN Director52
3. Secure the chassis port side to the rack rails using two #10-32 x 5/8 inch screws on each side.
Figure 11 Securing the chassis port side to rack rails
4. Tighten the screws, and torque to 32 inch-pounds. See Figure 11 for screw locations.
Reinstalling the chassis door
1. Verify that the spring-loaded pins on both door hinges are retracted (push levers into notches).
2. Align the door hinges with the chassis portion of the hinges.
3. Push the levers out of the notches to release the pins.
SHR-2514A