HP StorageWorks SAN Director Installation Guide (A7393-90009, May 2007)

Contents6
Installing the FC4-16IP Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Verifying 4/256 SAN Director prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Installing the FC4-16IP Blade into the 4/256 SAN Director . . . . . . . . . . . . . . . . . . . . . . 145
Cabling the FC4-16IP Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Recommendations for cable management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Configuring the FC4-16IP Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Activating iSCSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Enabling the persistently disabled ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Configuring the IP interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Creating the IP interface of the GbE port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Adding IP routes on a GbE port (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Verifying IP connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Adding ARP entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Configuring an iSCSI interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Creating iSCSI virtual targets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Creating discovery domains and domain sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Creating discovery domains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Creating/enabling discovery domain sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Defining CHAP entries for iSCSI device authentication. . . . . . . . . . . . . . . . . . . . . . . . 155
Finalizing the iSCSI configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Configuring iSCSI protocol for each iSCSI port (Optional) . . . . . . . . . . . . . . . . . . . . . 157
7 Replacing the chassis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Replacing the chassis — items required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
How to determine whether or not to replace the chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Record critical switch and SAN information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Disconnect from network and fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Remove components from chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Remove and replace chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Install components into new chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Install modems (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Verify correct operation of hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Configure new chassis serial number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Verify correct operation of system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Reconnect system to network and fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Verify correct configuration of fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Cable routing table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
8 Setting up and installing modems . . . . . . . . . . . . . . . . . . . . . . . 177
Using high availability connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Connecting modems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Setting up a remote modem system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Verifying the modem connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181