HP StorageWorks SAN Director Installation Guide (A7393-90009, May 2007)

SAN Director installation guide 91
Table 25 describes the WWN bezel LED patterns and the recommended actions for those patterns
for the 4/256 SAN Director.
NOTE: If a Status LED on the WWN bezel flashes, the Power LED on the WWN bezel also flashes,
for increased visibility.
Table 25 WWN bezel LED descriptions
LED purpose Color Status Recommended action
Port blade/CP port
Power
Steady green Power is OK. No action required.
Port blade/CP port
Status
Steady amber Blade is faulty. Check blade.
No light (LED is OFF) Blade is OK. No action required.
NOTE: If a blade slot or power supply bay has a filler panel installed, the corresponding LEDs on the
WWN port do not light up.
Power supply
Power/Status
Steady green Power is OK. No action required.
Steady amber Power supply is faulty. Check power supply.