Brocade Fabric OS Documentation Updates - Supporting Fabric OS v6.4.x (53-1002063-09, August 2012)

18 Fabric OS Documentation Updates

53-1002063-09

perfClearEEMonitor

Clears statistics counters of an end-to-end performance monitors.

Synopsis perfcleareemonitor [slotnumber/]portnumber [monitorId]

Description Use this command to clear statistics counters for all end-to-end performance monitors on a port,

or from an end-to-end monitor associated with a specific monitorId Issuing portStatsClear on a port

also results in all end-to-end monitors clearing.

Notes This command requires a Brocade Advanced Performance Monitoring license.

This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and

GbE ports.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operands:

slotnumber For bladed systems only, specifies the slot number of the port on which the

monitor is to be cleared, followed by a slash (/).

portnumber Specifies the number of the port on which the monitor is to be cleared,

relative to its slot for bladed systems. Use switchShow for a list of valid ports.

monitorId Specify the monitor number to clear. Monitor numbers are defined when

created and can be displayed using perfShowEEMonitor. This operand is

optional. If not specified, all monitor counters on the port are cleared.

Examples To clear statistics counters for an end-to-end monitor:

switch:admin> perfcleareemonitor 1/2 5

End-to-End monitor number 5 counters are cleared

switch:admin> perfcleareemonitor 1/2

This will clear ALL EE monitors' counters on port 2, continue? (yes, y, no, n):

[no] y