Brocade Fabric OS Documentation Updates - Supporting Fabric OS v6.4.x (53-1002063-09, August 2012)

Fabric OS Documentation Updates 53
53-1002063-09
Documentation updates for Fabric OS v6.4.0 and v6.4.1
8
8. Allow the hosts and devices to fully log in to the fabric.
After the hosts and devices are fully logged in, you can start FCFW I/O.
9. Use the portshow command to verify that FCFW is enabled.
Disabling FCFW
To disable FCFW, do the following.
1. Disable the ports that are currently being used for FCFW using the portdisable command.
2. Disable FCFW on the ports you just disabled using the portcfg fastwrite command.
portcfg fastwrite <slot/port> --disable
3. Enable a non-FCFW zoning configuration to remove and replace the fcacc zone that includes
the WWNs of the devices that were plugged into the ports you disabled in step 1.
rack1_6a1:root> portshow 3/3
portName:
portHealth: HEALTHY
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x20b03 PRESENT ACTIVE F_PORT G_PORT U_PORT LOGICAL_ONLINE
LOGIN NOELP ACCEPT
portType: 10.0
portState: 1 Online
portPhys: 6 In_Sync
portScn: 32 F_Port
port generation number: 0
portId: 022300
portIfId: 43320004
portWwn: 20:23:00:60:69:80:04:8a
portWwn of device(s) connected:
10:00:00:00:c9:2f:68:4d
Distance: normal
portSpeed: N2Gbps
LE domain: 0
FC Fastwrite: ON
Interrupts: 18 Link_failure: 0 Frjt: 0
Unknown: 0 Loss_of_sync: 2 Fbsy: 0
Lli: 12 Loss_of_sig: 4
Proc_rqrd: 13 Protocol_err: 0
Timed_out: 0 Invalid_word: 0
Rx_flushed: 0 Invalid_crc: 0
Tx_unavail: 0 Delim_err: 0
Free_buffer: 0 Address_err: 0
Overrun: 0 Lr_in: 2
Suspended: 0 Lr_out: 0
Parity_err: 0 Ols_in: 0
2_parity_err: 0 Ols_out: 2
CMI_bus_err: 0
Port part of other ADs: N