DCFM Enterprise User Manual (53-1001775-01, June 2010)

68 DCFM Enterprise User Manual

53-1001775-01

Restoring data to a new server

If your Management application server fails and you must recover information to a new server,

restore the data (Refer to “Restoring data” on page 67 for complete instructions).

Display

You can configure the display for FICON and reset the display to the default settings.

Setting your FICON display

FICON display setup rearranges the columns of any table that contains end device descriptions to

move the following eight columns to be the first columns: FC Address, Serial #, Tag, Device Type,

Model, Vendor, Port Type, and WWN.

To set the FICON display, complete the following steps.

1. Select Server > Options.

The Options dialog box displays (Figure 30).

FIGURE 30 Options dialog box (Display option)

2. Select Display in the Category list.

3. Click Set Up FICON Display.

All tables that contain end device descriptions display the following columns as the first eight

columns: FC Address, Serial #, Tag, Device Type, Model, Vendor, Port Type, and WWN.

4. Click Apply or OK to save your work.