DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 129
53-1001775-01
Customizing the layout of connections on the topology
5
• Vertical. Displays the device icons vertically.
• Horizontal. Displays the device icons horizontally.
• Most Connected at Center. Displays the node that has the most connections at the center
of the topology.
• Directional. Displays the internal nodes in a position where they mirror the external groups
to which they are connected.
2. Select the Set as Default Layout check box to set your selection as the default.
3. Click OK on the Map Display Properties dialog box.
Customizing the layout of connections on the topology
You can change the way inter-device connections display on the topology.
1. Right-click a group or the Connectivity Map and select Map Display, then select one of the
following options:
• Straight. Displays connections using straight lines.
• Orthogonal. Displays connections in orthogonal grid lines. Disabled if Free Form is
selected in Map Display Layout area.
• None. Hides the connections between devices.
2. Select the Set as Default Layout check box to set your selection as the default.
3. Click OK on the Map Display Properties dialog box.
Changing a group’s background color
You can customize the topology by changing a group’s background color.
1. Right-click a group or the Connectivity Map and select Map Display.
The Map Display Properties dialog box displays (Figure 59).
FIGURE 59 Map Display dialog box