DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 5

53-1001775-01

Port Display buttons

The Port Display buttons (Figure 4) are located at the top right of the Product List and enable you to

configure how ports display. You have the option of viewing connected (or occupied) product ports,

unoccupied product ports, or attached ports. Does not display until you discover a fabric.

NOTE

Occupied/connected ports are those that originate from a device, such as a switch. Attached ports

are ports of the target devices that are connected to the originating device.

FIGURE 4 Port Display buttons

1. Occupied Product Ports. Displays the ports of the devices in the fabrics (present in the

connectivity map) that are connected to other devices.

2. Unoccupied Product Ports. Displays the ports of the devices (shown in the connectivity map)

that are not connected to any other device.

3. Attached Ports. Displays the attached ports of the target devices.

Product List

The Product List, located on the SAN tab, displays an inventory of all discovered devices and ports.

The Product List is a quick way to look up product and port information, including serial numbers

and IP addresses.

To display the Product List, select View > Show Panels > Product List or press F9.

You can edit information in the Product List by double-clicking in a field marked with a green

triangle. You can sort the Product List by clicking a column heading.

The following columns (presented here in alphabetical order) are included in the Product List.

• Additional Port Info. Displays additional port information.

• All Levels. Displays all discovered fabrics, groups, devices, and ports as both text and icons.

Also, displays the status of the fabrics, groups, devices, and ports. For a list of icons that

display in the All Levels column, refer to the following tables:

- “Product icons” on page 11

- “Group icons” on page 12

- “Port icons” on page 12

- “Product status icons” on page 13

• Attached Port #. Displays the number of the attached port.

• BB Credit. Displays the BB Credit of the port.

• Class. Displays the class value of the FICON device port.

• Contact. Displays the name of the person or group you should contact about the product. This

field is editable at the fabric level.

• Description. Displays the description of the product. This field is editable at the fabric level.

• Device Type. Displays the type of device.