DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 423
53-1001775-01
Minimum CEE configuration for FCoE traffic
17
Configuring LLDP for FCoE
To configure LLDP for FCoE, complete the following steps.
1. Select Configure > Switch > CEE.
The CEE Configuration dialog box displays.
2. Select the switch to edit in the CEE Ports and LAGs table and click Edit.
The CEE Edit Switch dialog box displays.
3. Click the LLDP-DCBX tab.
4. The CEE Edit Switch - LLDP-DCBX tab dialog box displays.
FIGURE 174 CEE Edit Switch dialog box - LLDP-DCBX tab
5. Select the <Global Configuration> LLDP profile in the LLDP Profiles table.
6. Click the left arrow button to edit.
7. Select the FCoE Application and FCoE Logical Link check boxes in the Advertise table to
advertise them on the network.
8. Click OK.
The CEE Confirmation and Status dialog box displays.
9. Click Start on the CEE Confirmation and Status dialog box to save the changes to the switch.
10. Click Close on the CEE Configuration dialog box.