DCFM Enterprise User Manual (53-1001775-01, June 2010)

492 DCFM Enterprise User Manual

53-1001775-01

Configuring routing domain IDs

Logical (phantom) domains are created to enable routed fabrics. A logical domain called a front

domain is created in edge fabrics for every IFL. A logical domain called a translate (Xlate) domain is

created in routed fabrics that share devices.

Use the following procedure to change the domain IDs of these logical domains.

1. Right-click the fabric for which you want to configure phantom domains, and select Routing

Domain IDs.

The Configure Routing Domain IDs dialog box is displayed (Figure 207).

FIGURE 207 Configure Routing Domain IDs dialog box

2. Right-click anywhere in the Available Switches table and select Expand All to expand the switch

group for the fabric to display the FCR logical domains.

3. Select a logical domain, and click the right arrow to move the switch to the Selected Switches

table.

4. Select a domain ID number from the Domain ID list, which lists unused domain IDs.

You may need to scroll right or drag the dialog box open further to see the Domain ID column.

5. Click OK.