DCFM Enterprise User Manual (53-1001775-01, June 2010)

622 DCFM Enterprise User Manual
53-1001775-01
Deactivating a zone configuration
22
8. Click OK to continue.
The Activate Zone Config dialog box is closed and the Zone DB tab displays.
9. Click OK.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
Deactivating a zone configuration
Use this procedure to deactivate the active zone configuration.
There are several conditions that could cause the Deactivate button to be unavailable. They include
the following:
• There is no active zone configuration in the selected fabric.
• The fabric is not manageable.
• You do not have Read/Write or Activate privileges for the selected fabric and the selected zone
database (for FC fabric only).
• The selected fabric is not supported by the Management application.
• The selected fabric is no longer discovered.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2.
Click the Active Zone Config tab.
3. Select an FC fabric from the Active Zone Config list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4.
Click Deactivate.
5. Click Yes on the confirmation message.
If the deactivation succeeded, the zone configuration no longer displays in the Active Zone
Config tab.
If the deactivation failed, the zone configuration still displays in the Active Zone Config tab.
6. Click OK or Apply to save your changes.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.