DCFM Installation, Migration, and Transition Guide - Supporting DCFM 10.3.x (53-1001360-01, October 2009)

196 DCFM Installation, Migration, and Transition Guide
53-1001360-01
EFCM migration
2
Port label (client) Nickname
Name
Port Number
Port Address
Port WWN
YDBEFCM Client
Port display (client) Occupied
Unoccupied
Attached
YDBDevice Tree and
Topology
Fabric Persistence
(Server)
Fabric Persistence N
Discovery Discovery list
Subnet IPs
Individual IPs
Auth vault
Only individual switch IP
addresses belonging to
mixed fabrics (along with
discovery credentials) are
migrated.
Subnet IPs are not
migrated.
DB Discovery
HBA Server Mapping User-specified HBA server mapping is
migrated. The server should be
displayed in the fabric that was selected
in the ‘Display Fabric’ options after
migration.
YDBClient
Storage Port Mapping User-specified Storage port mapping is
migrated. Storage Arrays formed due to
the Storage port mapping are migrated.
YDBClient
Group Configuration
Manager
Firmware Library A raw dump of the firmware files stored
in the path are copied to the
appropriate path specified by the user.
YRaw folder (to
user from
M-EOS
Element
Manager)
Element Manager
Switch Group Switch Group N
Nickname Nicknames are exported as a
Properties file, which you can import
into the new application. Nicknames
greater than 128 characters long are
truncated in the .properties file and
cannot be imported into the new
application. Such Nicknames must be
shortened directly in the .csv file before
importing.
YDB as namesNames
Zoning Zoning
Zone Library Zone Library Y
(except mSAN zone
library)
DB Zoning
Zone sets Zone sets Y DB Zoning
TABLE 17 Data migrated from EFCM
Option Data Migrated? Output Format Affected Features