HP B-series Network Advisor Enterprise, Professional Plus, and Professional 11.1.5 Release Notes (5697-2464, January 2013)

Enumeration issue with HP StorageWorks 2408 FCoE Converged Network Switch running on

Fabric OS 6.3.x or lower

When Network Advisor manages an HP StorageWorks 2408 FCoE Converged Network Switch

running Fabric OS 6.3.x or earlier, connected to an FDMI enabled CNA, enumeration instance

fails for the following classes:

• Brocade_EthernetPortLANEndPoint

• Brocade_EthernetAdminDomainHostedLanEndPoint

• Brocade_EndpointOfNetworkPipe Brocade_LANEndpoint

• Brocade_EthernetSwitchHostedLANEndPoint

• Brocade_InEthernetLogicalNetwork

• Brocade_PlatformHostedLANEndPoint

Instance class key property with special character

Getinstance operation fails if the key property value contains either a semicolon or a

non-printable character.

FC port type value for imported HBAs

Brocade_topologyview.AntecedentFCPortType property value corresponding to the

imported HBA is shown as L_Port.

Migration Issue

Properties configured in the SMI Agent Configuration Tool do not migrate from DCFM 10.4.0

(Solaris) to DCFM 10.4.0 (Windows) through the Copy Data and Settings screen when migrating

from DCFM 10.4.0 (Solaris) to DCFM 10.4.0 (Windows) to Network Advisor 11.1.0 (Windows).

Documentation Updates

For the most recent Network Advisor documentation, visit the following HP website: http://

h18006.www1.hp.com/products/storageworks/dc_fabricmgr/index.html.

Under Support, select HP Support & Documents, and then select Manuals.

HP Network Advisor 11.1.0 fixes

Table 7 (page 18) lists the closed defects for this release.

Table 7 HP Network Advisor 11.1.0 closed defects

SolutionClosed fixes summary

Fixed in HP Network Advisor 11.1.0.Brocade Access Gateway (AG) switches running Fabric OS 5.3 were not

shown in DCFM and an inappropriate message was shown when trying to

rediscover the fabric.

Fixed in HP Network Advisor 11.1.0.Master log reports port number and port index as one greater than actual

value.

Fixed in HP Network Advisor 11.1.0.DCFM server runs out of memory when managing HP StorageWorks SAN

Director 2/128 or HP StorageWorks 4/256 SAN Director switches for

several weeks.

Fixed in HP Network Advisor 11.1.0.Server backup fails to authenticate with Network drive after a server reboot.

Fixed in HP Network Advisor 11.1.0.The twelfth character of a LUN Serial Number (LSN) is getting dropped on

some paths in the Encryption Disk LUN View.

Fixed in HP Network Advisor 11.1.0.Master Trunk ports in product tree and connections between AG and a

switch are not shown properly when F_Port trunking is enabled on the AG

setup.