HP StorageWorks Fabric OS 6.2 administrator guide (5697-0016, May 2009)

190 Managing virtual fabrics
5. Enable all Logical Switches by entering the following command on each Logical Switch that you created
in step 4 (the base switches are already enabled):
switchenable
The Logical Fabric is formed.
The fabricShow command displays all Logical Switches configured with the same fabric ID as the local
switch and all non-Virtual Fabric switches connected through ISLs to these Logical Switches.
The switchShow command displays logical ports as E_Ports, with -1 for the slot and the user port number
for the slot port.