HP StorageWorks Fabric OS 6.2 administrator guide (5697-0016, May 2009)

376 Using the FC-FC routing service
• If you are not configuring an HP StorageWorks 4/256 SAN Director, HP StorageWorks DC SAN
Backbone Director, or HP StorageWorks DC04 SAN Director Switch platform, skip to step 5.
switch:admin> slotshow -m
Slot Blade Type ID Model Name Status
--------------------------------------------------
1 AP BLADE 33 FA4-18 ENABLED
2 AP BLADE 24 FR4-18i ENABLED
3 SW BLADE 37 FC8-16 ENABLED
4 SW BLADE 39 FC10-6 ENABLED
5 CORE BLADE 52 CORE8 ENABLED
6 CP BLADE 50 CP8 ENABLED
7 CP BLADE 50 CP8 ENABLED
8 CORE BLADE 52 CORE8 ENABLED
9 SW BLADE 37 FC8-16 ENABLED
10 SW BLADE 55 FC8-32 ENABLED
11 UNKNOWN VACANT
12 SW BLADE 51 FC8-48 ENABLED
See Chapter 10, ”Configuring Enterprise-class platforms” on page 267 for a list of blades and their
corresponding IDs.
3. If you are configuring the HP StorageWorks 4/256 SAN Director with a B-Series Multi-Protocol Router
Blade, enter the chassisConfig command to verify that the director is using configuration option 5.
switch:admin> chassisconfig
Current Option: 5
All Supported Options
----------------------------------------------------
Option 5: One 384-port switch
Blade ID's 17, 18, 24, 31, 36, 39, 37, 51, 55 in slots 1-4, 7-10
Blade ID 16 in slots 5-6
4. If you are configuring EX_Ports on the 8-Gb/s port blades on the HP StorageWorks DC SAN Backbone
Director or HP StorageWorks DC04 SAN Director Switch (HP StorageWorks SAN Director 16 Port 8Gb
FC blade, HP StorageWorks SAN Director 32 Port 8Gb FC blade, or HP StorageWorks SAN Director
48 Port 8Gb FC blade), enter the licenseShow command to verify that the Integrated Routing license
is installed.
switch:admin> licenseshow
S9bddb9SQbTAceeC:
Fabric license
bzbzRcbcSc0c0SY:
Remote Fabric license
RyeSzRScycazfT0G:
Integrated Routing license
If the Integrated Routing license is not installed, you must install it, as described in Chapter 1.
”Performing basic configuration tasks” on page 29.