HP StorageWorks Fabric OS 6.2 administrator guide (5697-0016, May 2009)

400 Using the FC-FC routing service
In Fabric OS 5.3.0 and later, you can have 3000 LSAN zones configurable up to a maximum of 5000.
On a dual-CP switch, both CPs must have 5.3.0 code or later to select 5000. If the active CP is running
Fabric OS 5.3.0 or later with a maximum count of 5000 LSANs and the standby CP is running an
earlier firmware version, HA synchronization will fail. If 5000 is selected before downgrading to an
earlier version of Fabric OS, you are prompted to go back to the default maximum LSAN count of
3000.
For Proxy Device Slots, the physical and proxy devices use the 10000 device slots.
The information shows the maximum pool size for translate phantom node and port WWNs and shows
the number of translate node and port WWNs from this pool.
Phantom Node WWN
Phantom Port WWNs
Max proxy devices
Max NR_Port
The following example shows the use of the fcrResourceShow command to display physical port
(EX_Port) resources.
switch:admin> fcrresourceshow
Daemon Limits:
Max AllowedCurrently Used
-------------------------------
LSAN Zones: 300028
LSAN Devices: 1000051
Proxy Device Slots: 1000020
WWN Pool SizeAllocated
---------------------------------
Phantom Node WWN: 8192 5413
Phantom Port WWN: 3276816121
Port Limits:
Max proxy devices: 2000
Max NR_Ports: 1000
Currently Used(column 1: proxy, column 2: NR_Ports):
0 |034
1 |334
4 | 0 0
5 |0 0
6 |0 0
7 |0 0
8 | 6 34
9 | 6 34
10 | 6 34
11 | 6 34
12 | 6 34
13 | 6 34
14 | 6 34
15 | 6 34
16 | 8 34
17 | 8 34
18 | 8 34
19 | 8 34
20 | 8 34
21 | 8 34
22 | 8 34
23 | 8 34