Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

80 Fabric OS Message Reference
53-1002448-01
BL-1028
7
Recommended
Action
Restart or power cycle the blade.
If the message persists, replace the blade.
Severity CRITICAL
BL-1028
Message <timestamp>, [BL-1028], <sequence-number>,, CRITICAL, <system-name>, Switch
faulted; internal processor was reset before switch init completed.
Probable Cause Indicates that the switch's internal processor was reset before the initialization completed.
Recommended
Action
Restart or power cycle the switch.
If the message persists, replace the switch.
Severity CRITICAL
BL-1029
Message <timestamp>, [BL-1029], <sequence-number>,, INFO, <system-name>, All ports on the
switch will be reset as part of the firmware upgrade.
Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be
upgraded and resulted in the cold upgrade. As part of the upgrade, all the datapath elements were
reset.
Recommended
Action
No action is required.
Severity INFO
BL-1030
Message <timestamp>, [BL-1030], <sequence-number>,, INFO, <system-name>, All GigE/FCIP
Virtualization/FC Fastwrite ports on the switch will be reset as part of the
firmware upgrade.
Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be
upgraded and resulted in the cold upgrade. As part of the upgrade, all the GbE or Fibre Channel
over IP (FCIP) or Virtualization data elements or FC Fastwrite ports were reset.
Recommended
Action
No action is required.
Severity INFO