Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 159

53-1002448-01

CVLC-1028

Message <timestamp>, [CVLC-1028], <sequence-number>,, WARNING, <system-name>, Not

starting auto rekey on LUN with uncompressible blocks 1-16.

Container: <Target container name>, Initiator: <Initiator physical WWN>, LUN ID:

<LUN ID>.

Probable Cause Indicates a warning event.

Recommended

Action

Perform a manual rekey on this LUN.

Severity WARNING

CVLC-1029

Message <timestamp>, [CVLC-1029], <sequence-number>,, WARNING, <system-name>, Mirror LUN

is disabled as primary LUN is being rekeyed without splitting the mirror.

Container: <Target container name>, Initiator: <Initiator physical WWN>, LUN ID:

<LUN ID>.

Probable Cause Indicates performing FTE or manual rekey of primary LUN without splitting the mirror.

Recommended

Action

Break the mirror and re-establish the mirror after rekey on primary LUN is complete.

Severity WARNING

CVLC-1030

Message <timestamp>, [CVLC-1030], <sequence-number>,, WARNING, <system-name>, Primary LUN

may be out of sync with mirror LUN.

Container: <Target container name>, Initiator: <Initiator physical WWN>, LUN ID:

<LUN ID>.

Probable Cause Indicates the manual rekey was completed on primary LUN.

Recommended

Action

1. Make the target ports of the mirror LUN offline to hosts.

2. Re-establish the mirror.

3. Once the mirror is in sync, split the mirror.

4. Bring back the target ports of the mirror LUN online.

Severity WARNING