Manualshelf

Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

ManualsBrandsHP ManualsStorageHP 8/80 Power Pack+ (48) Full Fabric Ports Enabled SAN Switch
451452453454455456457458459460
Fabric OS Message Reference 367
53-1002448-01
FW-1181
45
FW-1181
Message <timestamp>, [FW-1181], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of invalid cyclic redundancy checks (CRC) that the port experiences has
fallen below the low boundary. A low number of invalid CRCs means that the switch is functioning
normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1182
Message <timestamp>, [FW-1182], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of invalid cyclic redundancy checks (CRC) that the port experiences has
risen above the high boundary.
Recommended
Action
This error generally indicates an deteriorating fabric hardware. Check your small form-factor
pluggables (SFPs), cables, and connections for faulty hardware. Verify that all optical hardware is
clean.
Severity WARNING
FW-1183
Message <timestamp>, [FW-1183], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause Indicates that the number of invalid cyclic redundancy checks (CRC) that the port experiences has
changed from a value outside of the acceptable range to a value within the acceptable range.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check
your small form-factor pluggables (SFP), cables, and connections for faulty hardware. Verify that all
optical hardware is clean.
Severity INFO