Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

418 Fabric OS Message Reference
53-1002448-01
FW-3018
45
Recommended
Action
No action is required.
Severity INFO
FW-3018
Message <timestamp>, [FW-3018], <sequence-number>,, INFO, <system-name>, <Port
Name>,<Label> value has changed(High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>
Probable Cause Indicates the number of state changes that the circuit experiences has changed. The state of the
circuit has changed for either of the reason that if the circuit has gone offline or it has come online.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation.
Severity INFO
FW-3019
Message <timestamp>, [FW-3019], <sequence-number>,, INFO, <system-name>, <Port
Name>,<Label> is below low boundary(High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>
Probable Cause Indicates the number of state changes that the circuit experiences has reduced below the low
boundary level. The state of the circuit has changed for either of the reason that if the circuit has
gone offline or it has come online.
Recommended
Action
No action is required.
Severity INFO
FW-3020
Message <timestamp>, [FW-3020], <sequence-number>,, WARNING, <system-name>, <Port
Name>,<Label> is above high boundary(High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>.
Probable Cause Indicates the number of state changes that the circuit experiences has increased above the high
boundary. The state of the circuit has changed for the reason that the circuit has gone offline, it has
come online, or it is testing.
Recommended
Action
No action is required.
Severity WARNING