Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

618 Fabric OS Message Reference
53-1002448-01
SEC-1182
94
Recommended
Action
No action is required.
Severity INFO
SEC-1182
Message <timestamp>, [SEC-1182], <sequence-number>,, INFO, <system-name>, Recovered
<number of> accounts.
Probable Cause Indicates the specified number of accounts has been recovered from backup.
Recommended
Action
No action is required.
Severity INFO
SEC-1183
Message <timestamp>, [SEC-1183], <sequence-number>,, ERROR, <system-name>, Policy to
binary conversion error: Port <port number> is out range.
Probable Cause Indicates a security database conversion has failed because of an invalid value.
Recommended
Action
Retry the command with a valid value.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
SEC-1184
Message <timestamp>, [SEC-1184], <sequence-number>,, INFO, <system-name>, <Security
server (RADIUS/LDAP)> configuration change, action <action>, server ID <server
name>.
Probable Cause Indicates the specified action is applied to the specified Remote Authentication Dial-in User Service
(RADIUS) / Lightweight Directory Access Protocol (LDAP) server configuration. The possible actions
are ADD, REMOVE, CHANGE, and MOVE
Recommended
Action
No action is required.
Severity INFO