Brocade Network Advisor Installation Guide v11.1x (53-1002320-01, May 2011)

Brocade Network Advisor Installation Guide 29 of 47
53-1002320-01
Trial configuration
9. (SAN with SMI Agent) Complete the following steps on the SMI Agent Configuration screen (Figure 7).
FIGURE 7 SMI Agent Configuration screen
a. Enable the SMI Agent by selecting the Enable SMI Agent check box.
b. Enable the SLP by selecting the Enable SLP check box, if necessary.
Only enabled after you select the Enable SMI Agent check box.
c. Enable the SSL by selecting the Enable SSL check box, if necessary.
Only enabled after you select the Enable SMI Agent check box.
d. Enter the SMI Agent port number in the SMI Agent Port # field (default is 5989 if SSL Enabled is selected;
otherwise, the default is 5988).
e. Click Next.
10. (SAN with SMI Agent Enterprise) Select one of the following options on the SAN Network Size screen and click
Next:
NOTE
If you selected the 75 day trial with the Professional Plus (2560 switch ports, 4 fabrics and 4096 devices)
option, the SAN Network Size screen does not display. The SAN size defaults to Small.
NOTE
Port count is equal to the total number of switch ports across all fabrics.
• Small (managing up to 2000 switch ports, 1-20 domains)
• Medium (managing up to 5000 switch ports, 21-60 domains)
• Large (managing up to 9000 switch ports, 61-120 domains)
11. Verify your configuration information on the Server Configuration Summary screen and click Next.