Brocade Network Advisor Installation Guide v11.1x (53-1002320-01, May 2011)

36 of 47 Brocade Network Advisor Installation Guide
53-1002320-01
SMI Agent only configuration
4. Complete the following steps on the Server IP Configuration screen.
FIGURE 12 Server IP Configuration screen
a. Select an address from the Server IP Configuration list.
b. Select an address from the Switch - Server IP Configuration Preferred Address list.
If DNS is not configured for your network, do not select the “hostname” option from either the Server IP
Configuration or Switch - Server IP Configuration Preferred Address list. Selecting the “hostname” option
prevents clients and devices from communicating with the server.
If you select a specific IP address from the Server IP Configuration screen and the selected IP address
changes, you will not be able to connect to the server. To change the IP address, refer to “Configuring an
explicit server IP address” on page 41.
c. Click Next.