Data Center Fabric Manager Enterprise User Manual - Supporting DCFM 10.3.x (53-1001357-01, October 2009)
450 DCFM Enterprise User Manual
53-1001357-01
Activating a PDCM configuration
14
Activating a PDCM configuration
You must have an active zone configuration before you can activate a PDCM configuration.
1. Select Configure > Allow/Prohibit Matrix.
The Configure Allow/Prohibit Matrix dialog box displays.
2. Select the PDCM configuration you want to activate. You can do this by expanding the view for
the switch under Available Switches and selecting a configuration, or you may select the matrix
under PDCM Matrix.
3. Click Activate.
A confirmation message is displayed.
4. Click Yes to confirm.
Deleting a PDCM configuration
You cannot delete the active configuration, the IPL configuration, or a configuration that is marked
as having uncommitted changes.
1. Select Configure > Allow/Prohibit Matrix.
The Configure Allow/Prohibit Matrix dialog box displays.
2. Select the PDCM configuration you want to delete. You can do this by expanding the view for
the switch under Available Switches and selecting a configuration, or you may select the matrix
under PDCM Matrix.
3. Click Delete.
A confirmation message is displayed.
4. Click Yes to confirm.
Changing the PDCM matrix display
There are three options for the PDCM Matrix display on the Configure Allow/Prohibit Matrix dialog
box:
• The matrix definitions may be cascaded (this is the default view).
• The matrix definitions may be tiled horizontally.
• The matrix definitions may be tiled vertically.
Perform the following steps to change the display to the desired format.
1. Select Configure > Allow/Prohibit Matrix.
The Configure Allow/Prohibit Matrix dialog box displays.
2. Select Cascade, Tile Horizontally, or Tile Vertically from the Window Arrangement list.