Fabric OS Documentation Updates Supporting Fabric OS v7.1.x
Fabric OS Documentation Updates 1
53-1002984-03
Chapter
2
Fabric OS Command Reference
In this chapter
• Documentation Updates for Fabric OS v7.1.0 . . . . . . . . . . . . . . . . . . . . . . . . . 1
• Documentation Updates for Fabric OS v7.1.2 . . . . . . . . . . . . . . . . . . . . . . . . . 2
Documentation Updates for Fabric OS v7.1.0
The updates in this section are for the Fabric OS Command Reference, publication number
53-1002746-02, published March 2013.
frameLog
Included the -type timeout option.
OPERANDS -type timeout
Specifies the discard frame types to disable. Specify timeout for timeout discard frames,.
myId
Updated the description and examples to change Unknown to N/A for the CP status and system status
results to macth the switch output.
DESCRIPTION The login session gives details of the following:
• CP/switch (or console/serial port) used to log in.
• The IP address of the current login session for Telnet or the name of the current console port or
the serial port (if modem login used).
• The current CP mode (Active, Standby, or N/A).
• The current system status (Redundant, Nonredundant, or N/A).
EXAMPLES switch:admin>myid
Current Switch: sw0
Session Detail: sw0 (123.123.123.123) N/A HA-Status-N/A
sfpShow
Included a note for the identifier field.
The identifier field has the value 3 for SFPs and mSFPs. mSFPs are supported only on FC8-64 blades
and can be identified with OUI 00:05:33.